IC manufacturers AnDAPT Inc

IC manufacturers (103)

AnDAPT Inc AmP8D6QF74 | Demoboard AnD8300EB

Overview

TopologyBuck Converter
Input voltage12 V
Output 11.2 V / 6 A
IC revision4

Description

The AmP™ device is an FPGA based platform for creating a custom Power Management Integrated Circuit (PMIC). The AmP device is customized by adding available Power Components designs based on system requirements. AmP device customization is as easy as using WebAmp™ application software to produce a customized PMIC in a very short period of time. AmP devices can be used to power FPGAs, Processors, Microcontrollers, and ASICs by integrating multiple power rails into single chip designs. The AmP device input voltage range is 4.5V to 20V. The AmP device is targeted for wall-powered applications or 2S-4S Li-Ion battery packs. AmP devices have up to 4 additional integrated LDOs of which two are fixed output voltages (3.3V and 1.2V) and two are user programmable.

Features

  • Enables On-Demand power management
  • Integrate application targeted Power Components
  • Power Blocks for a variety of topologies
    • Scalable Integrated N-channel MOSFETs (SIM)
    • Current sense for protection, telemetry, regulation
    • Build Switching topologies - Buck, Boost, Buck-Boost
    • Build Linear topologies - LDO, Load Switch
    • Build Mixed topologies - Battery Charger
    • Build BLDC (Motor Control) topologies – H-Bridge
  • Sensor Blocks, sensing voltages and currents
    • Regulation, protection and telemetry
    • Adaptive Digitizer (ADi)
    • Threshold Comparators (ThC)
    • Summation Amplifier (SuM)
    • Noise-Immune Reference (Nref) Array
  • Analog fabric connectivity for sensor signals
  • Digital μLogic fabric connectivity: Analog/Digital Blocks
    • Analog and Digital GPIOs, LUTs for logic & Interface
    • Integrated Compensator RAM (CRAM)
    • On-demand POL control loops and interfaces
    • Precision Modulation Timer Array
  • Industry first: Analog Proficiency – Digital Flexibility

Typical applications

  • Power Component Integrator / Digital power management IC / Battery Charger

More information

Products

Order Code Data­sheet Simu­lation Downloads Status Product seriesλDom typ.
(nm)
Emitting ColorλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chip Technology50% typ.
(°)
CTol. CVR
(V (DC))
SizeOperating TemperatureDF
(%)
RISOCeramic TypeL
(mm)
W
(mm)
Fl
(mm)
L
(µH)
IRP,40K
(A)
ISAT,30%
(A)
RDC typ.
(mΩ)
fres
(MHz)
VOP
(V)
MountRDC max.
(mΩ)
Endurance
(h)
IRIPPLE
(mA)
Z
(mΩ)
ILeak
(µA)
Ø D
(mm)
Center pin Ø (Value)
(mm)
Plug OD
(mm)
Working Voltage
(V (DC))
H
(mm)
Operation Force
(g)
Electrical Life
(Cycles)
Actuator ColorWashableVaporphase processPins
(pcs)
RowsGenderTypeIR
(A)
Packaging Samples
150060GS75000SPEC
26 files Active i| Production is active. Expected lifetime: >10 years.WL-SMCW SMT Mono-color Chip LED Waterclear 525 Green 515 430 3.2 InGaN 140 0603 -40 °C up to +85 °C 1.6 0.8 SMT 0.7 Tape and Reel
150060RS75000SPEC
26 files Active i| Production is active. Expected lifetime: >10 years.WL-SMCW SMT Mono-color Chip LED Waterclear 625 Red 630 250 2 AlInGaP 140 0603 -40 °C up to +85 °C 1.6 0.8 SMT 0.7 Tape and Reel
865060553006SPEC
9 files Active i| Production is active. Expected lifetime: >10 years.WCAP-ASLL Aluminum Electrolytic Capacitors100 µF ±20% 35 8.0 x 10.5 -55 °C up to +105 °C 141 MΩ 10.5 8.3 V-Chip SMT 5000 450 170 35 8 15" Tape & Reel
885012206076SPEC
9 files Active i| Production is active. Expected lifetime: >10 years.WCAP-CSGP MLCCs 25 V(DC)1 µF ±10% 25 0603 -55 °C up to +125 °C 100.5 GΩ X7R Class II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206088SPEC
9 files Active i| Production is active. Expected lifetime: >10 years.WCAP-CSGP MLCCs 50 V(DC)6.8 nF ±10% 50 0603 -55 °C up to +125 °C 2.510 GΩ X7R Class II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206095SPEC
9 files Active i| Production is active. Expected lifetime: >10 years.WCAP-CSGP MLCCs 50 V(DC)100 nF ±10% 50 0603 -55 °C up to +125 °C 35 GΩ X7R Class II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012207053SPEC
9 files Active i| Production is active. Expected lifetime: >10 years.WCAP-CSGP MLCCs 16 V(DC)4.7 µF ±10% 16 0805 -55 °C up to +125 °C 100.02 GΩ X7R Class II 2 1.25 0.5 1.25 7" Tape & Reel
885012107006SPEC
9 files Active i| Production is active. Expected lifetime: >10 years.WCAP-CSGP MLCCs 6.3 V(DC)47 µF ±20% 6.3 0805 -55 °C up to +85 °C 100.002 GΩ X5R Class II 2 1.25 0.5 1.25 7" Tape & Reel
885012107011SPEC
9 files Active i| Production is active. Expected lifetime: >10 years.WCAP-CSGP MLCCs 10 V(DC)22 µF ±20% 10 0805 -55 °C up to +85 °C 100.005 GΩ X5R Class II 2 1.25 0.5 1.25 7" Tape & Reel
885012107014SPEC
9 files Active i| Production is active. Expected lifetime: >10 years.WCAP-CSGP MLCCs 16 V(DC)10 µF ±20% 16 0805 -55 °C up to +85 °C 100.01 GΩ X5R Class II 2 1.25 0.5 1.25 7" Tape & Reel
885012209025SPEC
9 files Active i| Production is active. Expected lifetime: >10 years.WCAP-CSGP MLCCs 25 V(DC)2.2 µF ±10% 25 1210 -55 °C up to +125 °C 3.50.2 GΩ X7R Class II 3.2 2.5 0.75 1.6 7" Tape & Reel
885012209028SPEC
9 files Active i| Production is active. Expected lifetime: >10 years.WCAP-CSGP MLCCs 25 V(DC)10 µF ±10% 25 1210 -55 °C up to +125 °C 50.01 GΩ X7R Class II 3.2 2.5 0.3 2 7" Tape & Reel
885012109014SPEC
9 files Active i| Production is active. Expected lifetime: >10 years.WCAP-CSGP MLCCs 25 V(DC)22 µF ±20% 25 1210 -55 °C up to +85 °C 100.005 GΩ X5R Class II 3.2 2.5 0.6 2.5 7" Tape & Reel
694108106102SPEC
6 files Active i| Production is active. Expected lifetime: >10 years.WR-DC Power Jacks -40 °C up to +85 °C100 MΩ SMT 2.5 5.5 24 Right Angled 5 Tape and Reel
434111043826SPEC
5 files Active i| Production is active. Expected lifetime: >10 years.WS-TASV SMT Tact Switch 6.0x3.5 mm 12 -40 °C up to +85 °C100 MΩ 4.3 260 30000 White No not specified 0.05 Tape and Reel
61300211121SPEC
7 files Active i| Production is active. Expected lifetime: >10 years.WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 5.08 THT 250 2 Single Pin Header Straight 3 Bag
61300311121SPEC
7 files Active i| Production is active. Expected lifetime: >10 years.WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 7.62 THT 250 3 Single Pin Header Straight 3 Bag
61300421121SPEC
7 files Active i| Production is active. Expected lifetime: >10 years.WR-PHD 2.54 mm THT Dual Pin Header -40 °C up to +105 °C1000 MΩ 5.08 THT 250 4 Dual Pin Header Straight 3 Bag
61300511121SPEC
7 files Active i| Production is active. Expected lifetime: >10 years.WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 12.7 THT 250 5 Single Pin Header Straight 3 Bag
61300911121SPEC
7 files Active i| Production is active. Expected lifetime: >10 years.WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 22.86 THT 250 9 Single Pin Header Straight 3 Bag
74439344010SPEC
9 files Active i| Production is active. Expected lifetime: >10 years.WE-XHMI SMT Power Inductor 6030 -40 °C up to +125 °C 6.65 6.45 1 15.75 24.95 5.5 59 120 SMT 6.05 3 2 12
74439344033SPEC
9 files Active i| Production is active. Expected lifetime: >10 years.WE-XHMI SMT Power Inductor 6030 -40 °C up to +125 °C 6.65 6.45 3.3 7.65 14.5 19.2 31 120 SMT 21.12 3 2 6
74438357010SPEC
10 files Active i| Production is active. Expected lifetime: >10 years.WE-MAPI SMT Power Inductor 4030 -40 °C up to +125 °C 4.3 4.3 1 10.25 12.5 11.6 59 80 SMT 13.5 3.1 2 7.4
Samples
Order Code Data­sheet Simu­lation Downloads Status Product seriesλDom typ.
(nm)
Emitting ColorλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chip Technology50% typ.
(°)
CTol. CVR
(V (DC))
SizeOperating TemperatureDF
(%)
RISOCeramic TypeL
(mm)
W
(mm)
Fl
(mm)
L
(µH)
IRP,40K
(A)
ISAT,30%
(A)
RDC typ.
(mΩ)
fres
(MHz)
VOP
(V)
MountRDC max.
(mΩ)
Endurance
(h)
IRIPPLE
(mA)
Z
(mΩ)
ILeak
(µA)
Ø D
(mm)
Center pin Ø (Value)
(mm)
Plug OD
(mm)
Working Voltage
(V (DC))
H
(mm)
Operation Force
(g)
Electrical Life
(Cycles)
Actuator ColorWashableVaporphase processPins
(pcs)
RowsGenderTypeIR
(A)
Packaging Samples