IC-Hersteller Onsemi

IC-Hersteller (103)

Onsemi NCP1252D | Demoboard SEC-3PH-11-OBC-EVB

SEC-3PH-11-OBC-EVB: Three-phase On Board Charger (OBC) PFC-LLC platform

Details

TopologieLLC Resonanzwandler
Eingangsspannung195-265 V
Schaltfrequenz400 kHz
Ausgang 1450 V / 40 A

Beschreibung

The SEC-3PH-11-OBC-EVB is a three-phase On Board Charger (OBC) platform achieving state-of-the-art system efficiency with AEC-Q101 SiC power devices and drivers. The system boasts the high performance MOSFET 1200 V, 80 mΩ (NVHL080N120SC1), MOSFET Gate driver 6A (NCV51705) and Diode 650 V, 30 A (FFSB3065B-F085). Conceived in a modular approach and equipped with a user-friendly GUI, the kit facilitates the evaluation of the SiC devices in an OBC application. The LLC system is driven in voltage or current control modes by the embedded software. Ultimately, the platform serves as a learning environment for three-phase AC/DC power conversion. Visit the On Board Charging solutions solutions site to learn how ON Semiconductor can help you a comprehensive and advanced portfolio.

Eigenschaften

  • AEC-Q101 qualified SiC power devices and drivers
  • AC/DC 3-Ph PFC full bridge (Voltage Source Inverter)
  • DC/DC LLC full bridge
  • Executable software FOC (Vector Control), CC and CV
  • GUI
  • Input Voltage - 195-265 Vac
  • DC Bus Max - 735 Vdc
  • Output Voltage - 200-450 Vdc
  • Output Current - 0-40A
  • fs max. 400 kHz

Typische Anwendungen

  • Industrial high efficiency AC/DC
  • On board charger (OBC) / EV Charging / Battery Chargers / 3-Ph motor drives and SMPS

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
λDom typ.(nm)
Farbe
λPeak typ.(nm)
IV typ.(mcd)
VF typ.(V)
Chiptechnologie
50% typ.(°)
IR(mA)
ISAT(A)
fres(MHz)
Montageart
IRP,40K(A)
Version
Q(%)
Schlüsselweite(mm)
L(mm)
To
C
VR(V (AC))
Endurance(h)
IRIPPLE(mA)
Z(mΩ)
ILeak(µA)
DF(%)
Ø D(mm)
Verpackung
RESR(Ω)
Vin
VOut1(V)
IOut1(A)
Vaux(V)
fswitch(kHz)
NPRI : NSEC : NAUX
Gender
Ausführung
Arbeitsspannung(V (AC))
Betriebstemperatur
Schaltbild
Schaltfunktion
Betätigungsfunktion
B(mm)
H(mm)
IR 1(mA)
Ti
Tl(mm)
Pins
Z @ 100 MHz(Ω)
Zmax(Ω)
Testbedingung Zmax
IR 2(mA)
RDC max.(Ω)
Typ
n
L(µH)
∫Udt(µVs)
VT(V (AC))
CWW 1(pF)
LS(µH)
Bauform
PCB/Kabel/Panel
Modularity
Wire Section
Muster
WL-SMCW SMT Mono-color Chip LED Waterclear, 470 nm, Blau
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]470 nm
FarbeBlau 
Spitzen-Wellenlänge [typ.]465 nm
Lichtstärke [typ.]145 mcd
Durchlassspannung [typ.]3.2 V
ChiptechnologieInGaN 
Abstrahlwinkel Phi 0° [typ.]140 °
MontageartSMT 
Länge1.6 mm
VerpackungTape and Reel 
Betriebstemperatur -40 °C up to +85 °C
Breite0.8 mm
Höhe0.7 mm
Bauform0603 
WL-SMCW SMT Mono-color Chip LED Waterclear, 525 nm, Grün
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]525 nm
FarbeGrün 
Spitzen-Wellenlänge [typ.]515 nm
Lichtstärke [typ.]430 mcd
Durchlassspannung [typ.]3.2 V
ChiptechnologieInGaN 
Abstrahlwinkel Phi 0° [typ.]140 °
MontageartSMT 
Länge1.6 mm
VerpackungTape and Reel 
Betriebstemperatur -40 °C up to +85 °C
Breite0.8 mm
Höhe0.7 mm
Bauform0603 
WL-SMCW SMT Mono-color Chip LED Waterclear, 590 nm, Gelb
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]590 nm
FarbeGelb 
Spitzen-Wellenlänge [typ.]595 nm
Lichtstärke [typ.]120 mcd
Durchlassspannung [typ.]2 V
ChiptechnologieAlInGaP 
Abstrahlwinkel Phi 0° [typ.]140 °
MontageartSMT 
Länge1.6 mm
VerpackungTape and Reel 
Betriebstemperatur -40 °C up to +85 °C
Breite0.8 mm
Höhe0.7 mm
Bauform0603 
WL-SMCW SMT Mono-color Chip LED Waterclear, 625 nm, Rot
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]625 nm
FarbeRot 
Spitzen-Wellenlänge [typ.]630 nm
Lichtstärke [typ.]250 mcd
Durchlassspannung [typ.]2 V
ChiptechnologieAlInGaP 
Abstrahlwinkel Phi 0° [typ.]140 °
MontageartSMT 
Länge1.6 mm
VerpackungTape and Reel 
Betriebstemperatur -40 °C up to +85 °C
Breite0.8 mm
Höhe0.7 mm
Bauform0603 
WL-SMCW SMT Mono-color Chip LED Waterclear, 630 nm, Superrot
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]630 nm
FarbeSuperrot 
Spitzen-Wellenlänge [typ.]645 nm
Lichtstärke [typ.]60 mcd
Durchlassspannung [typ.]1.9 V
ChiptechnologieAlInGaP 
Abstrahlwinkel Phi 0° [typ.]140 °
MontageartSMT 
VersionSMT 
Länge1.6 mm
VerpackungTape and Reel 
Betriebstemperatur -40 °C up to +85 °C
Breite0.8 mm
Höhe0.7 mm
Bauform0603 
WE-CBF SMT-Ferrit, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
ProduktserieWE-CBF SMT-Ferrit
Nennstrom2000 mA
MontageartSMT 
VersionSMT 
Länge2 mm
Betriebstemperatur -55 °C up to +125 °C
Breite1.2 mm
Höhe0.9 mm
Nennstrom [1]3000 mA
Impedanz @ 100 MHz30 Ω
Maximale Impedanz55 Ω
Maximale Impedanz1000 MHz 
Nennstrom 23000 mA
Gleichstromwiderstand0.025 Ω
TypHochstrom 
Bauform0805 
WE-GFH SMT-Hochfrequenzdrossel, –, –
Simu­lation
Status NRNDi| Produktion ist aktiv. Der Artikel ist nicht empfohlen für neue Designs. Erwartete Lebenszeit: 2-5 Jahre.
Nennstrom210 mA
Eigenresonanzfrequenz22 MHz
MontageartSMT 
Güte30 %
Länge2.5 mm
Betriebstemperatur -40 °C up to +105 °C
Breite2 mm
Höhe1.8 mm
Gleichstromwiderstand5.04 Ω
Induktivität33 µH
Bauform2520 
WE-TPC SMT-Speicherdrossel, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom1550 mA
Sättigungsstrom1.7 A
Eigenresonanzfrequenz60 MHz
MontageartSMT 
Länge4.8 mm
Betriebstemperatur -40 °C up to +125 °C
Breite4.8 mm
Höhe2.8 mm
Pins
Gleichstromwiderstand0.07 Ω
Induktivität4.7 µH
Bauform4828 
WE-TPC SMT-Speicherdrossel, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom1300 mA
Sättigungsstrom1.25 A
Eigenresonanzfrequenz57 MHz
MontageartSMT 
Länge4.8 mm
Betriebstemperatur -40 °C up to +125 °C
Breite4.8 mm
Höhe2.8 mm
Pins
Gleichstromwiderstand0.09 Ω
Induktivität6.8 µH
Bauform4828 
WE-TPC SMT-Speicherdrossel, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom925 mA
Sättigungsstrom0.7 A
Eigenresonanzfrequenz20 MHz
MontageartSMT 
Länge4.8 mm
Betriebstemperatur -40 °C up to +125 °C
Breite4.8 mm
Höhe2.8 mm
Pins
Gleichstromwiderstand0.185 Ω
Induktivität22 µH
Bauform4828 
WE-PD SMT-Speicherdrossel, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom1500 mA
Sättigungsstrom1.8 A
Eigenresonanzfrequenz5.9 MHz
MontageartSMT 
VersionPerformance 
Länge10 mm
Betriebstemperatur -40 °C up to +150 °C
Breite10 mm
Höhe5 mm
Pins
Gleichstromwiderstand0.198 Ω
Induktivität100 µH
Bauform1050 
WE-PD SMT-Speicherdrossel, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Sättigungsstrom1.3 A
Eigenresonanzfrequenz15 MHz
MontageartSMT 
Performance Nennstrom2.1 A
VersionRobust 
Länge5.9 mm
Betriebstemperatur -40 °C up to +125 °C
Breite6.2 mm
Höhe5 mm
Pins
Gleichstromwiderstand0.115 Ω
Induktivität22 µH
Bauform6050 
WE-GDTI Gate-Drive-Übertrager, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
MontageartSMT 
Länge10.5 mm
Nennspannung80 V (AC)
Betriebstemperatur -40 °C up to +125 °C
Breite10.5 mm
Höhe11 mm
Übersetzungsverhältnis1:1 
Induktivität750 µH
Spannung-µSekunde102 µVs
Prüfspannung2500 V (AC)
Koppelkapazität11 pF
Streuinduktivität4 µH
BauformEP7 
WCAP-ASLI Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
MontageartV-Chip SMT 
VersionSMT 
Länge5.5 mm
Kapazität10 µF
Nennspannung35 V (AC)
Endurance 2000
Rippelstrom90 mA
Impedanz2000 mΩ
Leckstrom3.5 µA
Verlustfaktor14 %
Durchmesser4 mm
Verpackung15" Tape & Reel 
ESR (Serienersatzwiderstand)1.8844 Ω
Betriebstemperatur -55 °C up to +105 °C
Breite4.3 mm
Bauform4.0 x 5.5 
WCAP-ASLI Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
MontageartV-Chip SMT 
VersionSMT 
Länge7.7 mm
Kapazität68 µF
Nennspannung35 V (AC)
Endurance 2000
Rippelstrom265 mA
Impedanz400 mΩ
Leckstrom23.8 µA
Verlustfaktor14 %
Durchmesser6.3 mm
Verpackung15" Tape & Reel 
ESR (Serienersatzwiderstand)0.33477 Ω
Betriebstemperatur -55 °C up to +105 °C
Breite6.6 mm
Bauform6.3 x 7.7 
WCAP-AS5H Aluminum Electrolytic Capacitors, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
MontageartV-Chip SMT 
VersionSMT 
Länge10.5 mm
Kapazität100 µF
Nennspannung35 V (AC)
Endurance 5000
Rippelstrom150 mA
Leckstrom35 µA
Verlustfaktor13 %
Durchmesser10 mm
Verpackung15" Tape & Reel 
Betriebstemperatur -40 °C up to +105 °C
Breite10.3 mm
Bauform10.0 x 10.5 
WR-PHD Stiftleisten - Zweireihig, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom3000 mA
MontageartSMT 
Länge7.62 mm
VerpackungTube 
GenderStiftleiste 
Arbeitsspannung250 V (AC)
Betriebstemperatur -40 °C up to +105 °C
Pins
TypGerade 
WR-PHD Buchsenleisten - Zweireihig, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom3000 mA
MontageartSMT 
Länge13.2 mm
VerpackungTube 
GenderBuchsenleiste 
Arbeitsspannung250 V (AC)
Betriebstemperatur -40 °C up to +105 °C
Nennstrom [1]3000 mA
Pins10 
TypGerade 
WR-PHD Buchsenleisten - Zweireihig, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom3000 mA
MontageartSMT 
Länge20.82 mm
VerpackungTube 
GenderBuchsenleiste 
Arbeitsspannung250 V (AC)
Betriebstemperatur -40 °C up to +105 °C
Nennstrom [1]3000 mA
Pins16 
TypGerade 
WR-PHD Buchsenleisten - Zweireihig, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom3000 mA
MontageartSMT 
Länge30.98 mm
VerpackungTube 
GenderBuchsenleiste 
Arbeitsspannung250 V (AC)
Betriebstemperatur -40 °C up to +105 °C
Nennstrom [1]3000 mA
Pins24 
TypGerade 
WR-PHD Stiftleisten, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom1000 mA
MontageartSMT 
Länge6.35 mm
VerpackungTape and Reel mit Kappe 
GenderStiftleiste 
Arbeitsspannung100 V (AC)
Betriebstemperatur -40 °C up to +105 °C
Nennstrom [1]1000 mA
Pins10 
TypGerade 
WR-DSUB PCB, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
ProduktserieWR-DSUB PCB
Nennstrom3000 mA
VersionGestanzt 
Länge30.81 mm
VerpackungTray 
GenderWeiblich 
AusführungMit Sechskantschraube 
Arbeitsspannung125 V (AC)
Betriebstemperatur -55 °C up to +105 °C
Nennstrom [1]3000 mA
Pins
TypAbgewinkelt 
PCB/Kabel/PanelPCB 
WR-TBL Serie 313 - 5.08 mm Close Horizontal PCB Header, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom15000 mA
MontageartTHT 
Länge11.56 mm
VerpackungKarton 
AusführungGeschlossene Enden 
Arbeitsspannung320 V (AC)
Betriebstemperatur -40 °C up to +105 °C
Pins
TypGeschlossen, horizontale Steckrichtung 
PCB/Kabel/PanelPCB 
ModularityNein 
WR-TBL Serie 351 - 5.08 mm Vertical, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom20000 mA
MontageartKabel 
Länge10.16 mm
VerpackungKarton 
Arbeitsspannung320 V (AC)
Betriebstemperatur -40 °C up to +105 °C
Pins
TypVertikal 
PCB/Kabel/PanelKabel 
ModularityNein 
Wire Section 12 to 24 (AWG) 3.31 to 0.205 (mm²)
WS-PBTU THT Push Button Switch Right Angled 9.8x18.5 mm, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennspannung28 V (AC)
VerpackungTray 
Betriebstemperatur -40 °C up to +85 °C
SchaltbildSPDT 
SchaltfunktionON-(ON) 
Betätigungsfunktionautomatische Rückstellung 
Nennstrom [1]400 mA
WA-SSTIE Steel Spacer Stud, metric, internal/external, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Schlüsselweite7 mm
Länge25 mm
AußengewindeM4 
VerpackungKarton 
Betriebstemperatur -55 °C up to +150 °C
InnengewindeM4 
WA-SSTIE Steel Spacer Stud, metric, internal/external, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Schlüsselweite7 mm
Länge40 mm
AußengewindeM4 
VerpackungKarton 
Betriebstemperatur -55 °C up to +150 °C
InnengewindeM4 
WA-SSTII Steel Spacer Stud, metric, internal/internal, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Schlüsselweite7 mm
Länge70 mm
VerpackungKarton 
Betriebstemperatur -55 °C up to +150 °C
InnengewindeM4 
WE-OLTI Offline Flyback Transformers, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Sättigungsstrom2 A
MontageartTHT 
Länge27.05 mm
Input Voltage 141 - 403 V (AC)
Ausgangsspannung 124 V
Ausgangsstrom 12.1 A
Hilfsspannung24 V
Switching Frequency 60
Übersetzungsverhältnis8.67:1:1 
Betriebstemperatur -40 °C up to +125 °C
Breite32.25 mm
Höhe22.86 mm
Übersetzungsverhältnis8.67:1:1 
Induktivität1000 µH
Prüfspannung3000 V (AC)
Streuinduktivität30 µH
BauformEE25/13/7 
WP-THRBU REDCUBE THR with internal through-hole thread, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom85000 mA
MontageartTHR 
VerpackungLose 
Betriebstemperatur -55 °C up to +150 °C
Breite10 mm
Höhe4 mm
InnengewindeM5 
Gewindelänge3.5 mm
Pins
WCAP-PSHP Aluminium-Polymer-Kondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
MontageartV-Chip SMT 
Länge8.7 mm
Kapazität100 µF
Nennspannung35 V (AC)
Endurance 2000
Rippelstrom3000 mA
Leckstrom700 µA
Verlustfaktor12 %
Durchmesser8 mm
Verpackung15" Tape & Reel 
ESR (Serienersatzwiderstand)0.03 Ω
Betriebstemperatur -55 °C up to +105 °C
Breite8.3 mm
Bauform8.0 x 8.7 
WCAP-PSLC Aluminium-Polymer-Kondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
MontageartV-Chip SMT 
Länge12.4 mm
Kapazität330 µF
Nennspannung35 V (AC)
Endurance 2000
Rippelstrom4400 mA
Leckstrom2310 µA
Verlustfaktor12 %
Durchmesser10 mm
Verpackung15" Tape & Reel 
ESR (Serienersatzwiderstand)0.02 Ω
Betriebstemperatur -55 °C up to +105 °C
Breite10.3 mm
Bauform10.0 x 12.4 
WCAP-ASLL Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
MontageartV-Chip SMT 
Länge17 mm
Kapazität15 µF
Nennspannung450 V (AC)
Endurance 5000
Rippelstrom100 mA
Impedanz4000 mΩ
Leckstrom167.5 µA
Verlustfaktor20 %
Durchmesser16 mm
Verpackung15" Tape & Reel 
Betriebstemperatur -40 °C up to +105 °C
Breite17.1 mm
Bauform16.0 x 17.0 
750317850
Power Inductor, –, –
Simu­lation
Downloads
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Produktserie Power Inductor
750317849
Power Transformer, –, –
Simu­lation
Downloads
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Produktserie Power Transformer

On Board Chargers - Technical Requirements and Market Overview

Würth Elektronik Webinar: On Board Chargers - Technical Requirements and Market Overview