| Topologie | Sonstige Topologie |
PIC16(L)F177X microcontrollers feature a high level of integration of Intelligent Analog and digital peripherals for a wide range of applications, such as lighting, power supplies, battery charging, motor control and other general purpose applications. These devices deliver multiple Op Amps, 5-/10-bit DACs, High-Speed Comparators, 10-bit ADC, 10-/16-bit PWMs, Programmable Ramp Generator (PRG) and other peripherals that can be connected internally to create closed loop systems without using pins or PCB area. The 10 and 16-bit PWMs, the Digital Signal Modulator (DSM) and tri-state output Op Amp can be used together to create a LED dimming engine. The Peripheral Pin Select (PPS) functionality provides flexibility, eases PCB layout and peripheral utilization by allowing digital peripheral pin mapping to any I/O.
Artikel Nr. | Datenblatt | Simulation | Downloads | Status | Produktserie | λDom typ.(nm) | Farbe | λPeak typ.(nm) | IV typ.(mcd) | VF typ.(V) | Chiptechnologie | 2θ50% typ.(°) | IR(A) | IR[VDE](A) | C | VR 2(V (DC)) | Sicherheitsklasse | dV/dt(V/µs) | DF @ 1 kHz(%) | RISO | Raster(mm) | Verpackung | Batterietyp | Grundmaterial | Grundfarbe | Tol. C | Qmin. | DF(%) | Keramiktyp | Fl(mm) | Betriebstemperatur | Q(%) | fres(MHz) | IRP,40K(A) | Version | ISAT,10%(A) | ISAT,30%(A) | RDC(mΩ) | Endurance(h) | IRIPPLE(mA) | ILeak(µA) | Ø D(mm) | Interface typ | Gender | Pins | Leiterplattendicke(mm) | Arbeitsspannung(V (AC)) | G(mm) | Pinbeschichtung | H(mm) | Ø OD(mm) | IR 1(mA) | Ti | Tl(mm) | Z @ 100 MHz(Ω) | Zmax(Ω) | Testbedingung Zmax | IR 2(mA) | RDC max.(Ω) | Typ | Wicklungstyp | L(µH) | Z(mΩ) | IR(mA) | VR(V) | VT(V (DC)) | Wicklungsanzahl | Material | L(mm) | B(mm) | Montageart | Kanäle | Polarität | VCh max.(V) | ICh Leak max.(µA) | VBR min.(V) | CCh typ.(pF) | IPeak(A) | VCh Clamp ESD typ.(V) | VESD Contact(kV) | VRMS(V) | VDC(V) | VBR(V) | Wmax(J) | PDiss(mW) | VDE-Zulassung | Vin | n | ISAT(A) | RDC1 max(mΩ) | RDC2 max(mΩ) | Bauform | Muster | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | WL-SMCW SMT Mono-color Chip LED Waterclear, 470 nm, Blau | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWL-SMCW SMT Mono-color Chip LED Waterclear | dominante Wellenlänge [typ.]470 nm | FarbeBlau | Spitzen-Wellenlänge [typ.]465 nm | Lichtstärke [typ.]145 mcd | Durchlassspannung [typ.]3.2 V | ChiptechnologieInGaN | Abstrahlwinkel Phi 0° [typ.]140 ° | – | – | – | – | – | – | – | – | – | VerpackungTape and Reel | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +85 °C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe0.7 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Länge2 mm | Breite1.25 mm | MontageartSMT | – | – | – | – | – | – | – | – | – | – | – | – | – | Verlustleistung105 mW | – | – | – | – | – | – | Bauform0805 | ||||
![]() | WL-SMCW SMT Mono-color Chip LED Waterclear, 570 nm, Hellgrün | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWL-SMCW SMT Mono-color Chip LED Waterclear | dominante Wellenlänge [typ.]570 nm | FarbeHellgrün | Spitzen-Wellenlänge [typ.]572 nm | Lichtstärke [typ.]40 mcd | Durchlassspannung [typ.]2 V | ChiptechnologieAlInGaP | Abstrahlwinkel Phi 0° [typ.]140 ° | – | – | – | – | – | – | – | – | – | VerpackungTape and Reel | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +85 °C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe0.7 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Länge2 mm | Breite1.25 mm | MontageartSMT | – | – | – | – | – | – | – | – | – | – | – | – | – | Verlustleistung72 mW | – | – | – | – | – | – | Bauform0805 | ||||
![]() | WL-SMCW SMT Mono-color Chip LED Waterclear, 590 nm, Gelb | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWL-SMCW SMT Mono-color Chip LED Waterclear | dominante Wellenlänge [typ.]590 nm | FarbeGelb | Spitzen-Wellenlänge [typ.]595 nm | Lichtstärke [typ.]120 mcd | Durchlassspannung [typ.]2 V | ChiptechnologieAlInGaP | Abstrahlwinkel Phi 0° [typ.]140 ° | – | – | – | – | – | – | – | – | – | VerpackungTape and Reel | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +85 °C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe0.7 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Länge2 mm | Breite1.25 mm | MontageartSMT | – | – | – | – | – | – | – | – | – | – | – | – | – | Verlustleistung72 mW | – | – | – | – | – | – | Bauform0805 | ||||
![]() | WL-SMCW SMT Mono-color Chip LED Waterclear, 625 nm, Rot | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWL-SMCW SMT Mono-color Chip LED Waterclear | dominante Wellenlänge [typ.]625 nm | FarbeRot | Spitzen-Wellenlänge [typ.]630 nm | Lichtstärke [typ.]150 mcd | Durchlassspannung [typ.]2 V | ChiptechnologieAlInGaP | Abstrahlwinkel Phi 0° [typ.]140 ° | – | – | – | – | – | – | – | – | – | VerpackungTape and Reel | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +85 °C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe0.7 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Länge2 mm | Breite1.25 mm | MontageartSMT | – | – | – | – | – | – | – | – | – | – | – | – | – | Verlustleistung72 mW | – | – | – | – | – | – | Bauform0805 | ||||
![]() | WE-CBF SMT-Ferrit, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-CBF SMT-Ferrit | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Pad Dimension0.3 mm | Betriebstemperatur -55 °C up to +125 °C | – | – | – | VersionSMT | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe0.8 mm | – | Nennstrom [1]2000 mA | – | – | Impedanz @ 100 MHz300 Ω | Maximale Impedanz450 Ω | Maximale Impedanz250 MHz | Nennstrom 22000 mA | Gleichstromwiderstand0.15 Ω | TypHochstrom | – | – | – | Nennstrom1500 mA | – | – | Wicklungsanzahl1 | – | Länge1.6 mm | Breite0.8 mm | MontageartSMT | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Bauform0603 | ||||
![]() | WE-CNSW Stromkompensierter SMT Line Filter, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-CNSW Stromkompensierter SMT Line Filter | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +125 °C | – | – | – | VersionSMT | – | – | – | – | – | – | – | – | – | Pins4 | – | – | – | – | Höhe1.8 mm | – | – | – | – | Impedanz @ 100 MHz90 Ω | – | – | – | Gleichstromwiderstand0.3 Ω | – | Wicklungstypbifilar | Induktivität0.111 µH | – | Nennstrom370 mA | Nennspannung50 V | Prüfspannung125 V (DC) | Wicklungsanzahl2 | – | Länge3.2 mm | Breite1.6 mm | MontageartSMT | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Bauform1206 | ||||
![]() | WE-SL2 Stromkompensierter SMT Line Filter, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-SL2 Stromkompensierter SMT Line Filter | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +125 °C | – | – | – | VersionSMT | – | – | – | – | – | – | – | – | – | Pins4 | – | – | – | – | Höhe5 mm | – | – | – | – | – | Maximale Impedanz5500 Ω | – | – | Gleichstromwiderstand0.16 Ω | – | Wicklungstypbifilar | Induktivität51 µH | – | Nennstrom1000 mA | Nennspannung80 V | Prüfspannung500 V (DC) | Wicklungsanzahl2 | – | Länge9.2 mm | Breite6 mm | MontageartSMT | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||||
![]() | WE-CMB Stromkompensierte Netzdrossel, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-CMB Stromkompensierte Netzdrossel | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +125 °C | – | – | – | VersionTHT | – | – | – | – | – | – | – | – | – | Pins4 | – | – | Pin Länge3 mm | – | Höhe25.5 mm | – | Nennstrom [1]2500 mA | – | – | – | – | – | – | Gleichstromwiderstand0.095 Ω | – | – | Induktivität5000 µH | – | Nennstrom2500 mA | Nennspannung250 V | Prüfspannung1500 V (DC) | Wicklungsanzahl2 | MaterialMnZn | Länge23 mm | Breite13 mm | MontageartTHT | – | – | – | – | – | – | – | – | – | – | – | – | – | – | VDE-Zulassung40042670 | – | – | – | – | – | BauformM | ||||
![]() | WE-CMB NiZn Stromkompensierte Netzdrossel, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-CMB NiZn Stromkompensierte Netzdrossel | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +125 °C | – | – | – | VersionTHT | – | – | – | – | – | – | – | – | – | Pins4 | – | – | Pin Länge3.5 mm | – | Höhe22 mm | – | Nennstrom [1]8500 mA | – | – | – | – | – | – | Gleichstromwiderstand0.006 Ω | – | – | Induktivität32 µH | – | Nennstrom8500 mA | Nennspannung250 V | Prüfspannung1500 V (DC) | Wicklungsanzahl2 | MaterialNiZn | Länge18.5 mm | Breite14.5 mm | MontageartTHT | – | – | – | – | – | – | – | – | – | – | – | – | – | – | VDE-Zulassung40042670 | – | – | – | – | – | BauformS | ||||
![]() | WE-TVS TVS Diode – High Speed Series, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-TVS TVS Diode – High Speed Series | – | – | – | – | Durchlassspannung [typ.]0.7 V | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -55 °C up to +125 °C | – | – | – | – | – | – | – | – | – | Leckstrom5 µA | – | – | – | – | – | – | – | – | Höhe1.16 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Länge2.9 mm | Breite2.8 mm | MontageartSMT | Kanäle4+1 | PolaritätUnidirectional | Kanal Betriebsspannung [max.]5 V | Kanal (Rück) Leckstrom [max.]1 µA | (Rückwärts-) Durchbruchspannung [min.]6.1 V | (Kanal) Eingangskapazität [typ.]1 pF | (Reverse) Peak Pulse Current12 A | Kanal ESD Klemmspannung [typ.]13 V | ESD Kontact-Entladungsfähigkeit12 kV | – | DC Betriebsspannung6 V | – | – | – | – | – | – | – | – | – | BauformSOT23-6L | ||||
![]() | WE-VD Disk Varistor, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-VD Disk Varistor | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +105 °C | – | – | – | VersionTHT | – | – | – | – | – | – | Durchmesser23 mm | – | – | – | – | – | – | – | Höhe26.5 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Länge23 mm | Breite5 mm | MontageartTHT | – | – | – | – | – | – | (Reverse) Peak Pulse Current6500 A | – | – | Wechselstrom Betriebsspannung275 V | DC Betriebsspannung350 V | (Rückwärts-) Durchbruchspannung430 V | Energieabsorption264 J | Verlustleistung1000 mW | VDE-ZulassungJa | – | – | – | – | – | Bauform20 mm | ||||
![]() | WCAP-FTX2 Folienkondensatoren, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-FTX2 Folienkondensatoren | – | – | – | – | – | – | – | – | – | Kapazität1 µF | Nennspannung 2630 V (DC) | SicherheitsklasseX2 | Spannungsanstiegsgeschwindigkeit170 V/µs | Verlustfaktor0.1 % | Isolationswiderstand10 GΩ | Raster22.5 mm | VerpackungKarton | – | – | – | Kapazität±10% | – | – | – | – | Betriebstemperatur -40 °C up to +105 °C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Pin Länge4 mm | – | Höhe20 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Nennspannung275 V | – | – | – | Länge26 mm | Breite11 mm | MontageartBoxed THT | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | BauformRaster 22.5 mm | ||||
![]() | WE-TPC SMT-Speicherdrossel, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-TPC SMT-Speicherdrossel | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +125 °C | – | Eigenresonanzfrequenz20 MHz | – | – | – | – | – | – | – | – | – | – | – | Pins2 | – | – | – | – | Höhe2.8 mm | – | – | – | – | – | – | – | – | Gleichstromwiderstand0.185 Ω | – | – | Induktivität22 µH | – | Nennstrom925 mA | – | – | Wicklungsanzahl24.5 | – | Länge4.8 mm | Breite4.8 mm | MontageartSMT | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Sättigungsstrom0.7 A | – | – | Bauform4828 | ||||
![]() | WE-PD SMT-Speicherdrossel, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-PD SMT-Speicherdrossel | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +125 °C | – | Eigenresonanzfrequenz3.2 MHz | Performance Nennstrom0.54 A | VersionGestanzt | Sättigungsstrom 10.34 A | Sättigungsstrom @ 30%0.42 A | – | – | – | – | – | – | – | Pins2 | – | – | – | – | Höhe4.5 mm | – | – | – | – | – | – | – | – | Gleichstromwiderstand3.01 Ω | – | – | Induktivität470 µH | – | Nennstrom290 mA | – | – | Wicklungsanzahl108.5 | – | Länge7.3 mm | Breite7.3 mm | MontageartSMT | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Sättigungsstrom0.34 A | – | – | Bauform7345 | ||||
![]() | WE-HCI SMT-Hochstrominduktivität, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-HCI SMT-Hochstrominduktivität | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +125 °C | – | Eigenresonanzfrequenz5 MHz | Performance Nennstrom6.9 A | VersionSMT | Sättigungsstrom 18.25 A | Sättigungsstrom @ 30%9.5 A | Gleichstromwiderstand27.3 mΩ | – | – | – | – | – | – | Pins2 | – | – | – | – | Höhe12 mm | – | – | – | – | – | – | – | – | Gleichstromwiderstand0.03003 Ω | – | – | Induktivität68 µH | – | – | – | – | Wicklungsanzahl23.5 | MaterialMnZn | Länge22.5 mm | Breite22 mm | MontageartSMT | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Bauform2212 | ||||
![]() | WE-PFC PFC Chokes, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-PFC PFC Chokes | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +125 °C | – | – | – | – | – | – | – | – | – | – | – | – | – | Pins4 | – | – | – | – | Höhe20 mm | – | Nennstrom [1]1100 mA | – | – | – | – | – | – | – | – | – | Induktivität250 µH | – | Nennstrom1100 mA | – | Prüfspannung1500 V (DC) | – | – | Länge31 mm | Breite29 mm | MontageartTHT | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Input Voltage 195 - 265 V (AC) | Übersetzungsverhältnis44:5 | Sättigungsstrom5.6 A | Gleichstromwiderstand 1150 mΩ | Gleichstromwiderstand 2200 mΩ | BauformRM10 | ||||
![]() | WCAP-ATLI Aluminium-Elektrolytkondensatoren, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-ATLI Aluminium-Elektrolytkondensatoren | – | – | – | – | – | – | – | – | – | Kapazität680 µF | – | – | – | – | – | Raster5 mm | VerpackungAmmopack | – | – | – | Kapazität±20% | – | Verlustfaktor8 % | – | – | – | – | – | – | – | – | – | – | Endurance 5000 | Rippelstrom2490 mA | Leckstrom340 µA | Durchmesser13 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Nennspannung50 V | – | – | – | Länge25 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||||
![]() | WCAP-ASLI Aluminium-Elektrolytkondensatoren, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-ASLI Aluminium-Elektrolytkondensatoren | – | – | – | – | – | – | – | – | – | Kapazität22 µF | – | – | – | – | Isolationswiderstand4.54545 MΩ | – | Verpackung15" Tape & Reel | – | – | – | Kapazität±20% | – | Verlustfaktor16 % | – | – | Betriebstemperatur -55 °C up to +105 °C | – | – | – | VersionSMT | – | – | – | Endurance 2000 | Rippelstrom90 mA | Leckstrom3.52 µA | Durchmesser4 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Impedanz1980 mΩ | – | Nennspannung16 V | – | – | – | Länge5.5 mm | Breite4.3 mm | MontageartV-Chip SMT | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Bauform4.0 x 5.5 | ||||
![]() | WCAP-ASLI Aluminium-Elektrolytkondensatoren, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-ASLI Aluminium-Elektrolytkondensatoren | – | – | – | – | – | – | – | – | – | Kapazität100 µF | – | – | – | – | Isolationswiderstand1 MΩ | – | Verpackung15" Tape & Reel | – | – | – | Kapazität±20% | – | Verlustfaktor14 % | – | – | Betriebstemperatur -55 °C up to +105 °C | – | – | – | VersionSMT | – | – | – | Endurance 2000 | Rippelstrom290 mA | Leckstrom25 µA | Durchmesser6.3 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Impedanz380 mΩ | – | Nennspannung25 V | – | – | – | Länge7.7 mm | Breite6.6 mm | MontageartV-Chip SMT | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Bauform6.3 x 7.7 | ||||
| WCAP-CSGP MLCCs 50 V(DC), –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | – | – | – | – | Kapazität6.8 pF | – | – | – | – | Isolationswiderstand10 GΩ | – | Verpackung7" Tape & Reel | – | – | – | Kapazität±0.5pF | – | – | KeramiktypNP0 Klasse I | Pad Dimension0.4 mm | Betriebstemperatur -55 °C up to +125 °C | Güte536 % | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe0.8 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Nennspannung50 V | – | – | – | Länge1.6 mm | Breite0.8 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Bauform0603 | |||||
| WCAP-CSGP MLCCs 50 V(DC), –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | – | – | – | – | Kapazität100 nF | – | – | – | – | Isolationswiderstand5 GΩ | – | Verpackung7" Tape & Reel | – | – | – | Kapazität±10% | Güte [1]600 | Verlustfaktor3 % | KeramiktypX7R Klasse II | Pad Dimension0.4 mm | Betriebstemperatur -55 °C up to +125 °C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe0.8 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Nennspannung50 V | – | – | – | Länge1.6 mm | Breite0.8 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Bauform0603 | |||||
| WCAP-CSGP MLCCs 50 V(DC), –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | – | – | – | – | Kapazität220 pF | – | – | – | – | Isolationswiderstand10 GΩ | – | Verpackung7" Tape & Reel | – | – | – | Kapazität±10% | Güte [1]600 | Verlustfaktor2.5 % | KeramiktypX7R Klasse II | Pad Dimension0.5 mm | Betriebstemperatur -55 °C up to +125 °C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe0.8 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Nennspannung50 V | – | – | – | Länge2 mm | Breite1.25 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Bauform0805 | |||||
| WCAP-CSGP MLCCs 50 V(DC), –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | – | – | – | – | Kapazität1 nF | – | – | – | – | Isolationswiderstand10 GΩ | – | Verpackung7" Tape & Reel | – | – | – | Kapazität±10% | Güte [1]600 | Verlustfaktor2.5 % | KeramiktypX7R Klasse II | Pad Dimension0.5 mm | Betriebstemperatur -55 °C up to +125 °C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe0.8 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Nennspannung50 V | – | – | – | Länge2 mm | Breite1.25 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Bauform0805 | |||||
| WCAP-CSGP MLCCs 50 V(DC), –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | – | – | – | – | Kapazität100 nF | – | – | – | – | Isolationswiderstand5 GΩ | – | Verpackung7" Tape & Reel | – | – | – | Kapazität±10% | Güte [1]600 | Verlustfaktor2.5 % | KeramiktypX7R Klasse II | Pad Dimension0.5 mm | Betriebstemperatur -55 °C up to +125 °C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe0.8 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Nennspannung50 V | – | – | – | Länge2 mm | Breite1.25 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Bauform0805 | |||||
| WCAP-CSGP MLCCs 50 V(DC), –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | – | – | – | – | Kapazität1 µF | – | – | – | – | Isolationswiderstand0.1 GΩ | – | Verpackung7" Tape & Reel | – | – | – | Kapazität±10% | Güte [1]600 | Verlustfaktor10 % | KeramiktypX7R Klasse II | Pad Dimension0.5 mm | Betriebstemperatur -55 °C up to +125 °C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe1.25 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Nennspannung50 V | – | – | – | Länge2 mm | Breite1.25 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Bauform0805 | |||||
| WCAP-CSGP MLCCs 25 V(DC), –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 25 V(DC) | – | – | – | – | – | – | – | – | – | Kapazität4.7 µF | – | – | – | – | Isolationswiderstand0.1 GΩ | – | Verpackung7" Tape & Reel | – | – | – | Kapazität±20% | Güte [1]600 | Verlustfaktor7 % | KeramiktypX5R Klasse II | Pad Dimension0.6 mm | Betriebstemperatur -55 °C up to +85 °C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe1.6 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Nennspannung25 V | – | – | – | Länge3.2 mm | Breite1.6 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Bauform1206 | |||||
![]() | WR-MPC3 Male Header Dual Row, –, – | Simulation– | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWR-MPC3 Male Header Dual Row | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Isolationswiderstand1000 MΩ | Raster3 mm | VerpackungTray | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +105 °C | – | – | – | – | – | – | – | – | – | – | – | – | GenderMännlich | Pins6 | Leiterplattendicke1.6 mm | Arbeitsspannung250 V (AC) | – | PinbeschichtungZinn über Nickel | – | – | Nennstrom [1]5000 mA | – | – | – | – | – | – | – | TypVertikal | – | – | – | Nennstrom5000 mA | – | – | – | – | Länge12.7 mm | – | MontageartTHT | – | Polarität6 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
![]() | WR-FSH Shocksafe Fuseholder - PCB - Turn and Lock Cover - THT, –, – | Simulation– | Downloads6 Dateien | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | – | – | – | – | – | – | – | Nennstrom [UL]20 A | Nennstrom [VDE]10 A | – | – | – | – | – | – | – | VerpackungKarton | – | – | – | – | – | – | – | – | Betriebstemperatur -30 °C up to +120 °C | – | – | – | VersionStoßsicherer Sicherungshalter | – | – | – | – | – | – | – | – | – | – | – | Arbeitsspannung250 V (AC) | – | – | – | – | – | – | – | – | – | – | – | – | TypVertikal | – | – | – | Nennstrom10000 mA | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | VDE-Zulassung120170 | – | – | – | – | – | – | |||
![]() | WR-USB Mini/Micro Connectors, –, – | Simulation– | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWR-USB Mini/Micro Connectors | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Isolationswiderstand1000 MΩ | – | VerpackungTray | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +105 °C | – | – | – | – | – | – | – | – | – | – | – | Interface typType B | GenderBuchse | Pins5 | – | Arbeitsspannung30 V (AC) | – | – | – | – | Nennstrom [1]1000 mA | – | – | – | – | – | – | – | TypVertikal | – | – | – | Nennstrom1000 mA | – | – | – | – | – | – | MontageartTHT | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
![]() | WP-SMBU REDCUBE SMT with internal through-hole thread, –, – | Simulation– | Downloads6 Dateien | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | VerpackungLose | – | – | – | – | – | – | – | – | Betriebstemperatur -55 °C up to +150 °C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe5 mm | Außendurchmesser7 mm | Nennstrom [1]50000 mA | InnengewindeM3 | Gewindelänge6 mm | – | – | – | – | – | – | – | – | – | Nennstrom50000 mA | – | – | – | MaterialMessing | – | – | MontageartSMT | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
![]() | WA-BCPH Battery Holder, –, – | Simulation– | Downloads6 Dateien | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWA-BCPH Battery Holder | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Isolationswiderstand100 MΩ | – | VerpackungTray | Batterietyp2032 | GrundmaterialPA66 | GrundfarbeSchwarz | – | – | – | – | – | Betriebstemperatur -25 °C up to +85 °C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Nennstrom500 mA | – | – | – | – | – | – | MontageartTHT | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||
![]() | Simulation– | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWR-PHD Stiftleisten - Einreihig | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Isolationswiderstand1000 MΩ | Raster2.54 mm | VerpackungBeutel | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +105 °C | – | – | – | – | – | – | – | – | – | – | – | – | GenderStiftleiste | Pins6 | – | Arbeitsspannung250 V (AC) | – | – | – | – | – | – | – | – | – | – | – | – | TypGerade | – | – | – | Nennstrom3000 mA | – | – | – | – | Länge15.24 mm | – | MontageartTHT | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||||
![]() | WCAP-CSMH Mid and High Voltage, –, – | Downloads9 Dateien RF & Microwave SimulationsmodelleAlle 9 Dateien als ZIP herunterladen | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSMH Mid and High Voltage | – | – | – | – | – | – | – | – | – | Kapazität1 nF | – | – | – | – | Isolationswiderstand10 GΩ | – | Verpackung7" Tape & Reel | – | – | – | Kapazität±10% | – | Verlustfaktor2.5 % | KeramiktypX7R Klasse II | Pad Dimension0.5 mm | Betriebstemperatur -55 °C up to +125 °C | Güte600 % | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe1.25 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Nennspannung2000 V | – | – | – | Länge4.5 mm | Breite2.03 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Bauform1808 | |||
| WCAP-CSGP MLCCs 100 V(DC), –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 100 V(DC) | – | – | – | – | – | – | – | – | – | Kapazität47 pF | – | – | – | – | Isolationswiderstand10 GΩ | – | Verpackung7" Tape & Reel | – | – | – | Kapazität±5% | Güte [1]1000 | – | KeramiktypNP0 Klasse I | Pad Dimension0.4 mm | Betriebstemperatur -55 °C up to +125 °C | Güte1000 % | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe0.8 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Nennspannung100 V | – | – | – | Länge1.6 mm | Breite0.8 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Bauform0603 | |||||
| WCAP-CSGP MLCCs 100 V(DC), –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 100 V(DC) | – | – | – | – | – | – | – | – | – | Kapazität100 pF | – | – | – | – | Isolationswiderstand10 GΩ | – | Verpackung7" Tape & Reel | – | – | – | Kapazität±5% | Güte [1]1000 | – | KeramiktypNP0 Klasse I | Pad Dimension0.4 mm | Betriebstemperatur -55 °C up to +125 °C | Güte1000 % | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe0.8 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Nennspannung100 V | – | – | – | Länge1.6 mm | Breite0.8 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Bauform0603 | |||||
| WCAP-CSGP MLCCs 100 V(DC), –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 100 V(DC) | – | – | – | – | – | – | – | – | – | Kapazität470 pF | – | – | – | – | Isolationswiderstand10 GΩ | – | Verpackung7" Tape & Reel | – | – | – | Kapazität±5% | Güte [1]1000 | – | KeramiktypNP0 Klasse I | Pad Dimension0.4 mm | Betriebstemperatur -55 °C up to +125 °C | Güte1000 % | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe0.8 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Nennspannung100 V | – | – | – | Länge1.6 mm | Breite0.8 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Bauform0603 | |||||
| WCAP-CSGP MLCCs 100 V(DC), –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 100 V(DC) | – | – | – | – | – | – | – | – | – | Kapazität1 nF | – | – | – | – | Isolationswiderstand10 GΩ | – | Verpackung7" Tape & Reel | – | – | – | Kapazität±5% | Güte [1]1000 | – | KeramiktypNP0 Klasse I | Pad Dimension0.4 mm | Betriebstemperatur -55 °C up to +125 °C | Güte1000 % | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe0.8 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Nennspannung100 V | – | – | – | Länge1.6 mm | Breite0.8 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Bauform0603 | |||||
| WCAP-CSGP MLCCs 100 V(DC), –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 100 V(DC) | – | – | – | – | – | – | – | – | – | Kapazität1 pF | – | – | – | – | Isolationswiderstand10 GΩ | – | Verpackung7" Tape & Reel | – | – | – | Kapazität±0.25pF | Güte [1]420 | – | KeramiktypNP0 Klasse I | Pad Dimension0.4 mm | Betriebstemperatur -55 °C up to +125 °C | Güte420 % | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe0.8 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Nennspannung100 V | – | – | – | Länge1.6 mm | Breite0.8 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Bauform0603 | |||||
| WCAP-CSGP MLCCs 100 V(DC), –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 100 V(DC) | – | – | – | – | – | – | – | – | – | Kapazität1.5 pF | – | – | – | – | Isolationswiderstand10 GΩ | – | Verpackung7" Tape & Reel | – | – | – | Kapazität±0.25pF | Güte [1]430 | – | KeramiktypNP0 Klasse I | Pad Dimension0.4 mm | Betriebstemperatur -55 °C up to +125 °C | Güte430 % | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe0.8 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Nennspannung100 V | – | – | – | Länge1.6 mm | Breite0.8 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Bauform0603 | |||||
| WCAP-CSGP MLCCs 100 V(DC), –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 100 V(DC) | – | – | – | – | – | – | – | – | – | Kapazität2.2 pF | – | – | – | – | Isolationswiderstand10 GΩ | – | Verpackung7" Tape & Reel | – | – | – | Kapazität±0.25pF | Güte [1]444 | – | KeramiktypNP0 Klasse I | Pad Dimension0.4 mm | Betriebstemperatur -55 °C up to +125 °C | Güte444 % | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe0.8 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Nennspannung100 V | – | – | – | Länge1.6 mm | Breite0.8 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Bauform0603 | |||||
![]() | WCAP-FTBP Folienkondensatoren, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-FTBP Folienkondensatoren | – | – | – | – | – | – | – | – | – | Kapazität100 nF | – | – | Spannungsanstiegsgeschwindigkeit300 V/µs | Verlustfaktor0.1 % | Isolationswiderstand30 GΩ | Raster7.5 mm | VerpackungKarton | – | – | – | Kapazität±5% | – | – | – | – | Betriebstemperatur -40 °C up to +105 °C | – | – | – | VersionTHT | – | – | – | – | – | – | – | – | – | – | – | – | Pin Länge4 mm | – | Höhe11 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Nennspannung160 V | – | – | – | Länge10.5 mm | Breite5 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | BauformRaster 7.5 mm | ||||
![]() | WCAP-FTBP Folienkondensatoren, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-FTBP Folienkondensatoren | – | – | – | – | – | – | – | – | – | Kapazität150 nF | – | – | Spannungsanstiegsgeschwindigkeit120 V/µs | Verlustfaktor0.1 % | Isolationswiderstand30 GΩ | Raster22.5 mm | VerpackungKarton | – | – | – | Kapazität±5% | – | – | – | – | Betriebstemperatur -40 °C up to +105 °C | – | – | – | VersionTHT | – | – | – | – | – | – | – | – | – | – | – | – | Pin Länge4 mm | – | Höhe15 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Nennspannung630 V | – | – | – | Länge26 mm | Breite6 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | BauformRaster 22.5 mm | ||||
![]() | WCAP-ASLI Aluminium-Elektrolytkondensatoren, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-ASLI Aluminium-Elektrolytkondensatoren | – | – | – | – | – | – | – | – | – | Kapazität10 µF | – | – | – | – | Isolationswiderstand10 MΩ | – | Verpackung15" Tape & Reel | – | – | – | Kapazität±20% | – | Verlustfaktor12 % | – | – | Betriebstemperatur -55 °C up to +105 °C | – | – | – | VersionSMT | – | – | – | Endurance 2000 | Rippelstrom40 mA | Leckstrom6.3 µA | Durchmesser6.3 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Impedanz1928 mΩ | – | Nennspannung63 V | – | – | – | Länge5.5 mm | Breite6.6 mm | MontageartV-Chip SMT | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Bauform6.3 x 5.5 | ||||
750317616 | Offline Transformer, –, – | Simulation– | Downloads– | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | Produktserie Offline Transformer | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |