| Topology | Motor Drive |
| Input voltage | 5-60 V |
| IC revision | 1 |
The smart gate driver IC is designed for 3-phase sensorless Brushless DC (BLDC) motor applications. It integrates three half-bridge smart gate drivers capable of powering N-channel MOSFET bridges with voltages ranging from 4.5V to a maximum of 60V, featuring 1A drive and 2A sinking current capability. This setup enables control of high-current GaN MOSFETs. The IC includes a buck-boost converter to supply power to the MCU and incorporates three differential amplifiers with adjustable gain for precise ground-side shunt current sensing, feeding data to the MCU's ADC input. The MCU enhances data communication through CAN FD and I3C protocols and features a specialized ADC for motor control, supporting calculation-intensive algorithms for smoother motor tuning. The use of GaN high voltage MOSFETs allows for high current switching without bulky heatsinks, optimizing the system for compact, high-efficiency applications.
System Benefits:
Facilitates a minimalistic PCB design approach while keeping the specialized communications and motor control requirements.GaN MOSFETs enable compact heatsink designs and operation without forced cooling.Supports a wide range of motor specifications, from 5V to 60V, accommodating 20A motors without heatsinks (up to 1200W max) and peak startup currents reaching 46A.
Order Code | Datasheet | Simulation | Downloads | Status | Product series | R | Tol. R | PRated(W) | TCR(ppm/ °C) | TCR(ppm/ °C) | IR(A) | L(mm) | W(mm) | λDom typ.(nm) | Emitting Color | λPeak typ.(nm) | IV typ.(mcd) | VF typ.(V) | Chip Technology | 2θ50% typ.(°) | C | Tol. C | VR(mV) | Size | Operating Temperature | DF(%) | RISO | Fl(mm) | Ceramic Type | Packaging | Qmin. | Q(%) | L(µH) | ISAT(A) | fres(MHz) | Interface Type | Gender | Pins | Mount | PCB Thickness(mm) | Working Voltage(V (AC)) | G(mm) | H(mm) | Operation Force(g) | Electrical Life(Cycles) | Actuator Color | Washable | Vaporphase process | Z @ 100 MHz(Ω) | Zmax(Ω) | Test Condition Zmax | IR 2(mA) | RDC max.(Ω) | Type | Samples | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | WRIS-PSMC Metal Plate Resistors, 5 mΩ, ±1% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWRIS-PSMC Metal Plate Resistors | Resistance5 mΩ | Resistance±1% | Rated Power2 W | Temperature Coefficient of Resistance (min.)-100 ppm/ °C | Temperature Coefficient of Resistance (max.)100 ppm/ °C | Rated Current20 A | Length6.3 mm | Width3.1 mm | – | – | – | – | – | – | – | – | – | Rated Voltage100 mV | Size2512 | Operating Temperature -55 °C up to +155 °C | – | – | Pad Dimension1.1 mm | – | – | – | – | – | – | – | – | – | – | MountSMT | – | – | – | Height0.51 mm | – | – | – | – | – | – | – | – | – | – | – | ||||
![]() | WE-CBF SMT EMI Suppression Ferrite Bead, –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-CBF SMT EMI Suppression Ferrite Bead | – | – | – | – | – | Rated Current0.5 A | Length1 mm | Width0.5 mm | – | – | – | – | – | – | – | – | – | – | Size0402 | Operating Temperature -55 °C up to +125 °C | – | – | Pad Dimension0.25 mm | – | – | – | – | – | – | – | – | – | – | MountSMT | – | – | – | Height0.5 mm | – | – | – | – | – | Impedance @ 100 MHz120 Ω | Maximum Impedance200 Ω | Maximum Impedance600 MHz | Rated Current 21100 mA | DC Resistance0.2 Ω | TypeWide Band | ||||
![]() | WE-CBF SMT EMI Suppression Ferrite Bead, –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-CBF SMT EMI Suppression Ferrite Bead | – | – | – | – | – | Rated Current0.5 A | Length1.6 mm | Width0.8 mm | – | – | – | – | – | – | – | – | – | – | Size0603 | Operating Temperature -55 °C up to +125 °C | – | – | Pad Dimension0.3 mm | – | – | – | – | – | – | – | – | – | – | MountSMT | – | – | – | Height0.8 mm | – | – | – | – | – | Impedance @ 100 MHz220 Ω | Maximum Impedance280 Ω | Maximum Impedance350 MHz | Rated Current 21000 mA | DC Resistance0.3 Ω | TypeWide Band | ||||
![]() | WE-LQS SMT Power Inductor, –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-LQS SMT Power Inductor | – | – | – | – | – | Rated Current1.8 A | Length6 mm | Width6 mm | – | – | – | – | – | – | – | – | – | – | Size6045 | Operating Temperature -40 °C up to +125 °C | – | – | – | – | – | – | – | Inductance33 µH | Saturation Current2 A | Self Resonant Frequency12 MHz | – | – | – | MountSMT | – | – | – | Height4.5 mm | – | – | – | – | – | – | – | – | – | – | – | ||||
| WCAP-CSGP MLCCs 16 V(DC), –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 16 V(DC) | – | – | – | – | – | – | Length1.6 mm | Width0.8 mm | – | – | – | – | – | – | – | Capacitance220 nF | Capacitance±10% | Rated Voltage16000 mV | Size0603 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor5 % | Insulation Resistance2.3 GΩ | Pad Dimension0.4 mm | Ceramic TypeX7R Class II | Packaging7" Tape & Reel | Q-Factor [1]600 | – | – | – | – | – | – | – | – | – | – | – | Height0.8 mm | – | – | – | – | – | – | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 50 V(DC), –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | – | Length1.6 mm | Width0.8 mm | – | – | – | – | – | – | – | Capacitance2.2 nF | Capacitance±10% | Rated Voltage50000 mV | Size0603 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor2.5 % | Insulation Resistance10 GΩ | Pad Dimension0.4 mm | Ceramic TypeX7R Class II | Packaging7" Tape & Reel | Q-Factor [1]600 | – | – | – | – | – | – | – | – | – | – | – | Height0.8 mm | – | – | – | – | – | – | – | – | – | – | – | |||||
![]() | WS-TASV SMT Tact Switch 6.0x3.5 mm, –, – | Simulation– | Downloads6 files | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWS-TASV SMT Tact Switch 6.0x3.5 mm | – | – | – | – | – | Rated Current0.05 A | – | – | – | – | – | – | – | – | – | – | – | Rated Voltage12000 mV | – | Operating Temperature -40 °C up to +85 °C | – | Insulation Resistance100 MΩ | – | – | PackagingTape and Reel | – | – | – | – | – | – | – | – | – | – | – | – | Height4.3 mm | Operation Force160 g | Electrical Life50000 Cycles | Actuator ColorBlack | WashableNo | Vaporphase processnot specified | – | – | – | – | – | – | ||
![]() | WS-TASV SMT Tact Switch 6.0x3.5 mm, –, – | Simulation– | Downloads6 files | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWS-TASV SMT Tact Switch 6.0x3.5 mm | – | – | – | – | – | Rated Current0.05 A | – | – | – | – | – | – | – | – | – | – | – | Rated Voltage12000 mV | – | Operating Temperature -40 °C up to +85 °C | – | Insulation Resistance100 MΩ | – | – | PackagingTape and Reel | – | – | – | – | – | – | – | – | – | – | – | – | Height4.3 mm | Operation Force260 g | Electrical Life30000 Cycles | Actuator ColorWhite | WashableNo | Vaporphase processnot specified | – | – | – | – | – | – | ||
![]() | WS-TASV SMT Tact Switch 6.0x3.5 mm, –, – | Simulation– | Downloads6 files | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWS-TASV SMT Tact Switch 6.0x3.5 mm | – | – | – | – | – | Rated Current0.05 A | – | – | – | – | – | – | – | – | – | – | – | Rated Voltage12000 mV | – | Operating Temperature -40 °C up to +85 °C | – | Insulation Resistance100 MΩ | – | – | PackagingTape and Reel | – | – | – | – | – | – | – | – | – | – | – | – | Height4.3 mm | Operation Force360 g | Electrical Life50000 Cycles | Actuator ColorSalmon | WashableNo | Vaporphase processnot specified | – | – | – | – | – | – | ||
![]() | WS-TASV SMT Tact Switch 6.0x3.5 mm, –, – | Simulation– | Downloads6 files | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWS-TASV SMT Tact Switch 6.0x3.5 mm | – | – | – | – | – | Rated Current0.05 A | – | – | – | – | – | – | – | – | – | – | – | Rated Voltage12000 mV | – | Operating Temperature -40 °C up to +85 °C | – | Insulation Resistance100 MΩ | – | – | PackagingTape and Reel | – | – | – | – | – | – | – | – | – | – | – | – | Height5 mm | Operation Force360 g | Electrical Life50000 Cycles | Actuator ColorSalmon | WashableNo | Vaporphase processnot specified | – | – | – | – | – | – | ||
![]() | WCAP-CSMH Mid and High Voltage, –, – | Downloads8 files | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSMH Mid and High Voltage | – | – | – | – | – | – | Length3.2 mm | Width1.6 mm | – | – | – | – | – | – | – | Capacitance4.7 nF | Capacitance±10% | Rated Voltage1000000 mV | Size1206 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor2.5 % | Insulation Resistance10 GΩ | Pad Dimension0.6 mm | Ceramic TypeX7R Class II | Packaging7" Tape & Reel | – | Q-Factor600 % | – | – | – | – | – | – | – | – | – | – | Height1.25 mm | – | – | – | – | – | – | – | – | – | – | – | |||
![]() | WCAP-CSMH Mid and High Voltage, –, – | Downloads8 files | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSMH Mid and High Voltage | – | – | – | – | – | – | Length3.2 mm | Width1.6 mm | – | – | – | – | – | – | – | Capacitance68 pF | Capacitance±5% | Rated Voltage2000000 mV | Size1206 | Operating Temperature -55 °C up to +125 °C | – | Insulation Resistance10 GΩ | Pad Dimension0.6 mm | Ceramic TypeNP0 Class I | Packaging7" Tape & Reel | Q-Factor [1]1000 | Q-Factor1000 % | – | – | – | – | – | – | – | – | – | – | Height1.25 mm | – | – | – | – | – | – | – | – | – | – | – | |||
| WCAP-CSGP MLCCs 100 V(DC), –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 100 V(DC) | – | – | – | – | – | – | Length1.6 mm | Width0.8 mm | – | – | – | – | – | – | – | Capacitance100 nF | Capacitance±10% | Rated Voltage100000 mV | Size0603 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor5 % | Insulation Resistance1 GΩ | Pad Dimension0.4 mm | Ceramic TypeX7R Class II | Packaging7" Tape & Reel | Q-Factor [1]600 | – | – | – | – | – | – | – | – | – | – | – | Height0.8 mm | – | – | – | – | – | – | – | – | – | – | – | |||||
![]() | WL-SMCD SMT Mono-color Chip LED Diffused, –, – | Downloads25 files RAY files
| Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWL-SMCD SMT Mono-color Chip LED Diffused | – | – | – | – | – | – | Length1.6 mm | Width0.8 mm | Dominant Wavelength [typ.]624 nm | Emitting ColorRed | Peak Wavelength [typ.]632 nm | Luminous Intensity [typ.]90 mcd | Forward Voltage [typ.]2 V | Chip TechnologyAlInGaP | Viewing Angle Phi 0° [typ.]140 ° | – | – | – | Size0603 | Operating Temperature -40 °C up to +85 °C | – | – | – | – | PackagingTape and Reel | – | – | – | – | – | – | – | – | MountSMT | – | – | – | Height0.4 mm | – | – | – | – | – | – | – | – | – | – | – | |||
![]() | WL-SMCD SMT Mono-color Chip LED Diffused, –, – | Downloads25 files RAY files
| Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWL-SMCD SMT Mono-color Chip LED Diffused | – | – | – | – | – | – | Length1.6 mm | Width0.8 mm | Dominant Wavelength [typ.]525 nm | Emitting ColorGreen | Peak Wavelength [typ.]520 nm | Luminous Intensity [typ.]430 mcd | Forward Voltage [typ.]3.2 V | Chip TechnologyInGaN | Viewing Angle Phi 0° [typ.]140 ° | – | – | – | Size0603 | Operating Temperature -40 °C up to +85 °C | – | – | – | – | PackagingTape and Reel | – | – | – | – | – | – | – | – | MountSMT | – | – | – | Height0.4 mm | – | – | – | – | – | – | – | – | – | – | – | |||
![]() | WCAP-CSST Soft Termination, –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSST Soft Termination | – | – | – | – | – | – | Length1.6 mm | Width0.8 mm | – | – | – | – | – | – | – | Capacitance10 nF | Capacitance±10% | Rated Voltage50000 mV | Size0603 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor2.5 % | Insulation Resistance10 GΩ | Pad Dimension0.4 mm | Ceramic TypeX7R Class II | Packaging7" Tape & Reel | – | – | – | – | – | – | – | – | – | – | – | – | Height0.8 mm | – | – | – | – | – | – | – | – | – | – | – | ||||
![]() | WCAP-CSST Soft Termination, –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSST Soft Termination | – | – | – | – | – | – | Length3.2 mm | Width1.6 mm | – | – | – | – | – | – | – | Capacitance100 nF | Capacitance±10% | Rated Voltage250000 mV | Size1206 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor2.5 % | Insulation Resistance1 GΩ | Pad Dimension0.6 mm | Ceramic TypeX7R Class II | Packaging7" Tape & Reel | – | – | – | – | – | – | – | – | – | – | – | – | Height1.6 mm | – | – | – | – | – | – | – | – | – | – | – | ||||
| WCAP-CSGP MLCCs 16 V(DC), –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 16 V(DC) | – | – | – | – | – | – | Length1.6 mm | Width0.8 mm | – | – | – | – | – | – | – | Capacitance2.2 µF | Capacitance±10% | Rated Voltage16000 mV | Size0603 | Operating Temperature -55 °C up to +85 °C | Dissipation Factor10 % | Insulation Resistance0.05 GΩ | Pad Dimension0.4 mm | Ceramic TypeX5R Class II | Packaging7" Tape & Reel | Q-Factor [1]600 | – | – | – | – | – | – | – | – | – | – | – | Height0.8 mm | – | – | – | – | – | – | – | – | – | – | – | |||||
![]() | WR-PHD Socket Header - Dual, –, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-PHD Socket Header - Dual | – | – | – | – | – | Rated Current3 A | Length15.74 mm | – | – | – | – | – | – | – | – | – | – | – | – | Operating Temperature -40 °C up to +105 °C | – | Insulation Resistance1000 MΩ | – | – | PackagingTray | – | – | – | – | – | – | GenderSocket Header | Pins12 | MountTHT | – | Working Voltage250 V (AC) | – | – | – | – | – | – | – | – | – | – | – | – | TypeAngled | |||
| WCAP-CSGP MLCCs 25 V(DC), –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 25 V(DC) | – | – | – | – | – | – | Length1.6 mm | Width0.8 mm | – | – | – | – | – | – | – | Capacitance10 µF | Capacitance±20% | Rated Voltage25000 mV | Size0603 | Operating Temperature -55 °C up to +85 °C | Dissipation Factor20 % | Insulation Resistance0.01 GΩ | Pad Dimension0.35 mm | Ceramic TypeX5R Class II | Packaging7" Tape & Reel | Q-Factor [1]600 | – | – | – | – | – | – | – | – | – | – | – | Height0.8 mm | – | – | – | – | – | – | – | – | – | – | – | |||||
![]() | WR-USB Type C Connectors, –, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-USB Type C Connectors | – | – | – | – | – | Rated Current5 A | – | – | – | – | – | – | – | – | – | – | – | – | – | Operating Temperature -40 °C up to +85 °C | – | Insulation Resistance100 MΩ | – | – | PackagingTape and Reel | – | – | – | – | – | Interface TypeType C | GenderReceptacle | Pins16 | MountSMT | PCB Thickness0.8 mm | Working Voltage48 V (AC) | Pin length0.95 mm | – | – | – | – | – | – | – | – | – | – | – | TypeHorizontal |