| Topology | Buck Converter |
| IC revision | 1.1 |
The AmP 8DB2 is a ready to use Demonstration Board to evaluate Power Components on the AmP, Adaptive Multi - Rail Power Platform. Simply drag and drop Power Components in the WebAmP design tool and compile into a Configuration Bitstream File. In the AmPLink Control tab, download the file over the AmPLink USB adapter to the AmPDB2 Demonstration Board. The .HEX file is used to download to the Flash memory or the .HAX file is used to download directly to the AmP Platform. Synchronous Buck, Async Buck, Async Boost, LDO, Load Switch and Supervisor Power Components may then be evaluated.
Order Code | Datasheet | Simulation | Downloads | Status | Product series | λDom typ.(nm) | Emitting Color | λPeak typ.(nm) | IV typ.(mcd) | VF typ.(V) | Chip Technology | 2θ50% typ.(°) | C | Tol. C | VR(V (DC)) | Size | Operating Temperature | DF(%) | RISO | Ceramic Type | L(mm) | W(mm) | Fl(mm) | Packaging | L(µH) | IRP,40K(A) | ISAT,10%(A) | ISAT,30%(A) | RDC(mΩ) | fres(MHz) | Material | Qty. | Endurance(h) | IRIPPLE(mA) | Z(mΩ) | ILeak(µA) | Ø D(mm) | Pins | Center pin Ø (Value)(mm) | Plug OD(mm) | Type | IR(A) | Working Voltage(V (DC)) | Mount | H(mm) | Operation Force(g) | Electrical Life(Cycles) | Actuator Color | Washable | Vaporphase process | SamplesAvailability & Sample | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | SPECWL-SMCW SMT Mono-color Chip LED Waterclear, 525 nm, Green | Availability – | Downloads27 files RAY files
| Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWL-SMCW SMT Mono-color Chip LED Waterclear | Dominant Wavelength [typ.]525 nm | Emitting ColorGreen | Peak Wavelength [typ.]515 nm | Luminous Intensity [typ.]430 mcd | Forward Voltage [typ.]3.2 V | Chip TechnologyInGaN | Viewing Angle Phi 0° [typ.]140 ° | – | – | – | Size0603 | Operating Temperature -40 °C up to +85 °C | – | – | – | Length1.6 mm | Width0.8 mm | – | PackagingTape and Reel | – | – | – | – | – | – | – | Packaging Unit4000 | – | – | – | – | – | – | – | – | – | – | – | MountSMT | Height0.7 mm | – | – | – | – | – | –Check availability | ||
![]() | SPECWL-SMCW SMT Mono-color Chip LED Waterclear, 625 nm, Red | Availability – | Downloads27 files RAY files
| Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWL-SMCW SMT Mono-color Chip LED Waterclear | Dominant Wavelength [typ.]625 nm | Emitting ColorRed | Peak Wavelength [typ.]630 nm | Luminous Intensity [typ.]250 mcd | Forward Voltage [typ.]2 V | Chip TechnologyAlInGaP | Viewing Angle Phi 0° [typ.]140 ° | – | – | – | Size0603 | Operating Temperature -40 °C up to +85 °C | – | – | – | Length1.6 mm | Width0.8 mm | – | PackagingTape and Reel | – | – | – | – | – | – | – | Packaging Unit4000 | – | – | – | – | – | – | – | – | – | – | – | MountSMT | Height0.7 mm | – | – | – | – | – | –Check availability | ||
![]() | SPECWE-HCI SMT Flat Wire High Current Inductor, –, – | Availability – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-HCI SMT Flat Wire High Current Inductor | – | – | – | – | – | – | – | – | – | – | Size7040 | Operating Temperature -40 °C up to +150 °C | – | – | – | Length7 mm | Width6.9 mm | – | – | Inductance2.2 µH | Performance Rated Current10.2 A | Saturation Current @ 10%5.6 A | Saturation Current @ 30%13 A | DC Resistance11.4 mΩ | Self Resonant Frequency52 MHz | MaterialSuperflux | Packaging Unit1000 | – | – | – | – | – | Pins2 | – | – | – | – | – | MountSMT | Height3.8 mm | – | – | – | – | – | –Check availability | |||
![]() | SPECWE-HCI SMT Flat Wire High Current Inductor, –, – | Availability – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-HCI SMT Flat Wire High Current Inductor | – | – | – | – | – | – | – | – | – | – | Size7050 | Operating Temperature -40 °C up to +150 °C | – | – | – | Length7 mm | Width6.9 mm | – | – | Inductance1.1 µH | Performance Rated Current19.6 A | Saturation Current @ 10%6 A | Saturation Current @ 30%13 A | DC Resistance3.15 mΩ | Self Resonant Frequency135 MHz | MaterialSuperflux | Packaging Unit1000 | – | – | – | – | – | Pins2 | – | – | – | – | – | MountSMT | Height4.8 mm | – | – | – | – | – | –Check availability | |||
![]() | SPECWE-HCI SMT Flat Wire High Current Inductor, –, – | Availability – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-HCI SMT Flat Wire High Current Inductor | – | – | – | – | – | – | – | – | – | – | Size7050 | Operating Temperature -40 °C up to +150 °C | – | – | – | Length7 mm | Width6.9 mm | – | – | Inductance3.3 µH | Performance Rated Current10.9 A | Saturation Current @ 10%3.2 A | Saturation Current @ 30%8 A | DC Resistance9 mΩ | Self Resonant Frequency65 MHz | MaterialSuperflux | Packaging Unit1000 | – | – | – | – | – | Pins2 | – | – | – | – | – | MountSMT | Height4.8 mm | – | – | – | – | – | –Check availability | |||
![]() | SPECWCAP-ASLL Aluminum Electrolytic Capacitors, –, – | Availability – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-ASLL Aluminum Electrolytic Capacitors | – | – | – | – | – | – | – | Capacitance100 µF | Capacitance±20% | Rated Voltage35 V (DC) | Size8.0 x 10.5 | Operating Temperature -55 °C up to +105 °C | Dissipation Factor14 % | Insulation Resistance1 MΩ | – | Length10.5 mm | Width8.3 mm | – | Packaging15" Tape & Reel | – | – | – | – | – | – | – | Packaging Unit500 | Endurance 5000 | Ripple Current450 mA | Impedance170 mΩ | Leakage Current35 µA | Diameter8 mm | – | – | – | – | – | – | MountV-Chip SMT | – | – | – | – | – | – | –Check availability | |||
SPECWCAP-CSGP MLCCs 50 V(DC), –, – | Availability – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | – | – | Capacitance6.8 nF | Capacitance±10% | Rated Voltage50 V (DC) | Size0603 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor2.5 % | Insulation Resistance10 GΩ | Ceramic TypeX7R Class II | Length1.6 mm | Width0.8 mm | Pad Dimension0.4 mm | Packaging7" Tape & Reel | – | – | – | – | – | – | – | Packaging Unit4000 | – | – | – | – | – | – | – | – | – | – | – | – | Height0.8 mm | – | – | – | – | – | –Check availability | ||||
SPECWCAP-CSGP MLCCs 50 V(DC), –, – | Availability – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | – | – | Capacitance100 nF | Capacitance±10% | Rated Voltage50 V (DC) | Size0603 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor3 % | Insulation Resistance5 GΩ | Ceramic TypeX7R Class II | Length1.6 mm | Width0.8 mm | Pad Dimension0.4 mm | Packaging7" Tape & Reel | – | – | – | – | – | – | – | Packaging Unit4000 | – | – | – | – | – | – | – | – | – | – | – | – | Height0.8 mm | – | – | – | – | – | –Check availability | ||||
SPECWCAP-CSGP MLCCs 6.3 V(DC), –, – | Availability – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 6.3 V(DC) | – | – | – | – | – | – | – | Capacitance47 µF | Capacitance±20% | Rated Voltage6.3 V (DC) | Size0805 | Operating Temperature -55 °C up to +85 °C | Dissipation Factor10 % | Insulation Resistance0.002 GΩ | Ceramic TypeX5R Class II | Length2 mm | Width1.25 mm | Pad Dimension0.5 mm | Packaging7" Tape & Reel | – | – | – | – | – | – | – | Packaging Unit3000 | – | – | – | – | – | – | – | – | – | – | – | – | Height1.25 mm | – | – | – | – | – | –Check availability | ||||
SPECWCAP-CSGP MLCCs 10 V(DC), –, – | Availability – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 10 V(DC) | – | – | – | – | – | – | – | Capacitance22 µF | Capacitance±20% | Rated Voltage10 V (DC) | Size0805 | Operating Temperature -55 °C up to +85 °C | Dissipation Factor10 % | Insulation Resistance0.005 GΩ | Ceramic TypeX5R Class II | Length2 mm | Width1.25 mm | Pad Dimension0.5 mm | Packaging7" Tape & Reel | – | – | – | – | – | – | – | Packaging Unit3000 | – | – | – | – | – | – | – | – | – | – | – | – | Height1.25 mm | – | – | – | – | – | –Check availability | ||||
SPECWCAP-CSGP MLCCs 16 V(DC), –, – | Availability – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 16 V(DC) | – | – | – | – | – | – | – | Capacitance10 µF | Capacitance±20% | Rated Voltage16 V (DC) | Size0805 | Operating Temperature -55 °C up to +85 °C | Dissipation Factor10 % | Insulation Resistance0.01 GΩ | Ceramic TypeX5R Class II | Length2 mm | Width1.25 mm | Pad Dimension0.5 mm | Packaging7" Tape & Reel | – | – | – | – | – | – | – | Packaging Unit3000 | – | – | – | – | – | – | – | – | – | – | – | – | Height1.25 mm | – | – | – | – | – | –Check availability | ||||
SPECWCAP-CSGP MLCCs 25 V(DC), –, – | Availability – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 25 V(DC) | – | – | – | – | – | – | – | Capacitance10 µF | Capacitance±10% | Rated Voltage25 V (DC) | Size1210 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor5 % | Insulation Resistance0.01 GΩ | Ceramic TypeX7R Class II | Length3.2 mm | Width2.5 mm | Pad Dimension0.3 mm | Packaging7" Tape & Reel | – | – | – | – | – | – | – | Packaging Unit1000 | – | – | – | – | – | – | – | – | – | – | – | – | Height2 mm | – | – | – | – | – | –Check availability | ||||
SPECWCAP-CSGP MLCCs 25 V(DC), –, – | Availability – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 25 V(DC) | – | – | – | – | – | – | – | Capacitance22 µF | Capacitance±20% | Rated Voltage25 V (DC) | Size1210 | Operating Temperature -55 °C up to +85 °C | Dissipation Factor10 % | Insulation Resistance0.005 GΩ | Ceramic TypeX5R Class II | Length3.2 mm | Width2.5 mm | Pad Dimension0.6 mm | Packaging7" Tape & Reel | – | – | – | – | – | – | – | Packaging Unit1000 | – | – | – | – | – | – | – | – | – | – | – | – | Height2.5 mm | – | – | – | – | – | –Check availability | ||||
![]() | SPECWR-DC Power Jacks, –, – | Simulation– | Availability – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-DC Power Jacks | – | – | – | – | – | – | – | – | – | – | – | Operating Temperature -40 °C up to +85 °C | – | Insulation Resistance100 MΩ | – | – | – | – | PackagingTape and Reel | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Center pin Ø2.5 mm | Recommended Plug outer Ø5.5 mm | TypeRight Angled | Rated Current5 A | Working Voltage24 V (DC) | MountSMT | – | – | – | – | – | – | –Check availability | ||
![]() | SPECWS-TASV SMT Tact Switch 6.0x3.5 mm, –, – PCN pendingDue to a pending PCN, a modification of the component will be implemented soon. Please find the PCN below. If you have further questions please get in contact with our sales staff. | Simulation– | Availability – | Downloads6 files | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWS-TASV SMT Tact Switch 6.0x3.5 mm | – | – | – | – | – | – | – | – | – | Rated Voltage12 V (DC) | – | Operating Temperature -40 °C up to +85 °C | – | Insulation Resistance100 MΩ | – | – | – | – | PackagingTape and Reel | – | – | – | – | – | – | – | Packaging Unit1800 | – | – | – | – | – | – | – | – | – | Rated Current0.05 A | – | – | Height4.3 mm | Operation Force260 g | Electrical Life30000 Cycles | Actuator ColorWhite | WashableNo | Vaporphase processnot specified | –Check availability | |
![]() | SPECWR-PHD Pin Header - Single, –, – | Simulation– | Availability – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-PHD Pin Header - Single | – | – | – | – | – | – | – | – | – | – | – | Operating Temperature -40 °C up to +105 °C | – | Insulation Resistance1000 MΩ | – | Length5.08 mm | – | – | PackagingBag | – | – | – | – | – | – | – | – | – | – | – | – | – | Pins2 | – | – | TypeStraight | Rated Current3 A | Working Voltage250 V (DC) | MountTHT | – | – | – | – | – | – | –Check availability | ||
![]() | SPECWR-PHD Pin Header - Single, –, – | Simulation– | Availability – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-PHD Pin Header - Single | – | – | – | – | – | – | – | – | – | – | – | Operating Temperature -40 °C up to +105 °C | – | Insulation Resistance1000 MΩ | – | Length7.62 mm | – | – | PackagingBag | – | – | – | – | – | – | – | – | – | – | – | – | – | Pins3 | – | – | TypeStraight | Rated Current3 A | Working Voltage250 V (DC) | MountTHT | – | – | – | – | – | – | –Check availability | ||
![]() | SPECWR-PHD Pin Header - Dual, –, – | Simulation– | Availability – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-PHD Pin Header - Dual | – | – | – | – | – | – | – | – | – | – | – | Operating Temperature -40 °C up to +105 °C | – | Insulation Resistance1000 MΩ | – | Length5.08 mm | – | – | PackagingBag | – | – | – | – | – | – | – | – | – | – | – | – | – | Pins4 | – | – | TypeStraight | Rated Current3 A | Working Voltage250 V (DC) | MountTHT | – | – | – | – | – | – | –Check availability | ||
![]() | SPECWR-PHD Pin Header - Single, –, – PCN pendingDue to a pending PCN, a modification of the component will be implemented soon. Please find the PCN below. If you have further questions please get in contact with our sales staff. | Simulation– | Availability – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-PHD Pin Header - Single | – | – | – | – | – | – | – | – | – | – | – | Operating Temperature -40 °C up to +105 °C | – | Insulation Resistance1000 MΩ | – | Length22.86 mm | – | – | PackagingBag | – | – | – | – | – | – | – | – | – | – | – | – | – | Pins9 | – | – | TypeStraight | Rated Current3 A | Working Voltage250 V (DC) | MountTHT | – | – | – | – | – | – | –Check availability |
| Expected Availability | Opening inventory | Quantity |
|---|---|---|
| Current Availability | – | – |