Onsemi FSL336 | Demoboard EVBUM2784/D

Beschreibung

Control Interface and Signals Figure 3 shown the schematic of the control interface and some signals processing circuit which are related to the interface. A 34 pin dual row connector connect the power board and the control board. Table 1 is the signals on the connector. For noise immunity reason, all of the analog signals are differential. The voltage range of the analog signals is 0−1 Vp−p. The voltage level of all digital signals is 3.3 V.

Eigenschaften

• 3 fast legs + 1 slow leg Interleave PFC and invertor to get high efficiency with low current ripple.
• Flexible control interface available to adapt different controller board
• Hardware protection of OCP and OVP.
• Onboard auxiliary power system to supply every circuits on the board and the control board. No outside DC source need.

Typische Anwendungen

• On Board EV Charger

Weiterführende Informationen

• Datenblatt