| Topology | Buck Converter |
| Input voltage | 2.8-5.5 V |
| Output 1 | 3.3 V / 2.5 A |
| IC revision | Rev 0, 03-May-2017 |
This document describes the characteristic and operation of the Active Semi ACT88320EVK1-101 evaluation kit (EVK). It provides setup and operation instructions, schematic, layout, BOM, and test data. This EVK demonstrates the ACT88320QI101 ActivePMU power management IC. Other ACT88320QIxxx options can be evaluated on this EVK by replacing the IC and any other necessary components.
The EVK can be used as a standalone board if desired. However, to access the internal registers and to takefull advantage of the IC’s capability, the user must connect the EVK kit to a PC with Active Semi’s USB-TOI2Cinterface dongle and use the GUI software. The EVK provides full access to the each converter’s inputand output voltage, as well as all the digital control signals. This gives the user the flexibility to configure theEVK to match their real world system.Note that the ACT88320EVK1-101 is specifically configured for the ACT88320QI101. This IC does not usePush-Button.
Order Code | Datasheet | Simulation | Downloads | Status | Product series | Pins | PCB/Cable/Panel | Modularity | Type | Wire Section | λDom typ.(nm) | Emitting Color | λPeak typ.(nm) | IV typ.(mcd) | VF typ.(V) | Chip Technology | 2θ50% typ.(°) | L(µH) | IRP,40K(A) | ISAT,30%(A) | RDC typ.(mΩ) | fres(MHz) | VOP(V) | Mount | L(mm) | H(mm) | IR(A) | Working Voltage(V (AC)) | Operating Temperature | Samples | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | WE-MAPI SMT Power Inductor, 2, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-MAPI SMT Power Inductor | Pins2 | – | – | – | – | – | – | – | – | – | – | – | Inductance1 µH | Performance Rated Current3.55 A | Saturation Current @ 30%5.3 A | DC Resistance63 mΩ | Self Resonant Frequency80 MHz | Operating Voltage80 V | MountSMT | Length2.5 mm | Height1 mm | Rated Current2.5 A | – | Operating Temperature -40 °C up to +125 °C | ||||
![]() | WE-MAPI SMT Power Inductor, 2, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-MAPI SMT Power Inductor | Pins2 | – | – | – | – | – | – | – | – | – | – | – | Inductance1 µH | Performance Rated Current10.1 A | Saturation Current @ 30%11.5 A | DC Resistance12 mΩ | Self Resonant Frequency55 MHz | Operating Voltage80 V | MountSMT | Length4 mm | Height2 mm | Rated Current7.2 A | – | Operating Temperature -40 °C up to +125 °C | ||||
![]() | WR-TBL Series 213 - 5.00 mm Horiz.l Entry Modular, 2, Rising Cage Clamp | Simulation– | Downloads6 files | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-TBL Series 213 - 5.00 mm Horiz.l Entry Modular | Pins2 | PCB/Cable/PanelPCB | ModularityYes | TypeHorizontal | Wire Section 26 to 16 (AWG) 0.5 to 1.5 (mm²) | – | – | – | – | – | – | – | – | – | – | – | – | – | MountTHT | Length10 mm | – | Rated Current10 A | Working Voltage250 V (AC) | Operating Temperature -40 °C up to +105 °C | ||
![]() | WR-PHD Pin Header - Single, 3, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-PHD Pin Header - Single | Pins3 | – | – | TypeStraight | – | – | – | – | – | – | – | – | – | – | – | – | – | – | MountTHT | Length7.62 mm | – | Rated Current3 A | Working Voltage250 V (AC) | Operating Temperature -40 °C up to +105 °C | |||
![]() | WR-PHD Pin Header - Single, 4, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-PHD Pin Header - Single | Pins4 | – | – | TypeStraight | – | – | – | – | – | – | – | – | – | – | – | – | – | – | MountTHT | Length10.16 mm | – | Rated Current3 A | Working Voltage250 V (AC) | Operating Temperature -40 °C up to +105 °C | |||
![]() | WL-SMCW SMT Mono-color Chip LED Waterclear, –, – | Downloads27 files RAY files
| Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWL-SMCW SMT Mono-color Chip LED Waterclear | – | – | – | – | – | Dominant Wavelength [typ.]470 nm | Emitting ColorBlue | Peak Wavelength [typ.]465 nm | Luminous Intensity [typ.]145 mcd | Forward Voltage [typ.]3.2 V | Chip TechnologyInGaN | Viewing Angle Phi 0° [typ.]140 ° | – | – | – | – | – | – | MountSMT | Length1.6 mm | Height0.7 mm | – | – | Operating Temperature -40 °C up to +85 °C |