IC-Hersteller Texas Instruments

IC-Hersteller (104)

Texas Instruments XJ784S45AALY | Demoboard AM69 and AM69A starter kit

AM69x AI vision processor

Details

TopologieSonstige Topologie
IC-Revision0.1

Beschreibung

The SK-AM69 Starter Kit/Evaluation Module (EVM) is based on the AM69x AI vision processor which includes an image signal processor (ISP) supporting up to 1440MP/s, 32 tera-operations-per-second (TOPS) AI accelerator, eight 64-bit Arm®-Cortex® A72 microprocessor, and H.264/H.265 video encode/decode. The SK-AM69x is an ideal choice formachine vision, traffic monitoring, retail automation, and factory automation.The starter kit also includes two RPI 22-Pin CSI connector and two MIPI CSI-2 40-Pin expansion connectors for up to 12 cameras, making it suitable for a variety of embedded vision and AI applications on the edge. Our ISP can handle different lighting conditions in video streams by using HDR encoding for camera support. Our deep-learning accelerator enables classification and object detection at low latency and high frame rate.Processor SDK AM69A software development kit (SDK) supports Linux application development. On-chip emulation logic allows for emulation and debugging using standard development tools such as Code Composer Studio™ (CCS).FeaturesPerformance: AM69 processor enables 32 TOPS deep-learning performance and hardware-accelerated edge AI at low power Camera interfaces: three CSI-2 ports compatible with Raspberry Pi or a high-speed 40-pin Samtec camera connector allowing up to twelve cameras (requires multi camera hub) Connectivity: three SuperSpeed USB Type A ports, one SuperSpeed USB Type C port, one ethernet port, one M.2 key E connector and one M.2 key M connector, four CAN-FD interfaces, four UART terminals over one USB bridge Memoy: four DRAM, LPDDR4‐4266, 32 gigabytes total memory, support for inline ECC Display: DisplayPort with up to 4K resolution with MST support and 1080 HDMI

Typische Anwendungen

  • Microprocessor

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
λDom typ.(nm)
Emittierte Farbe
λPeak typ.(nm)
IV typ.(mcd)
VF typ.(V)
Chiptechnologie
50% typ.(°)
f
Tol. f
Stabilität(ppm)
Cload(pF)
Betriebstemperatur
Schlüsselweite(mm)
Ti
Ø ID(mm)
Ø OD(mm)
Verpackung
VPE
Interface typ
Typ
Ausführung
Gender
Pins
Montageart
Leiterplattendicke(mm)
IR(A)
Arbeitsspannung(V (AC))
Raster(mm)
Kontaktwiderstand(mΩ)
G(mm)
Poles
L(mm)
Dampfphasenprozess
H(mm)
Betätigungskraft(g)
Elektrische Lebensdauer(Cycles)
Actuator-Farbe
Waschbar
MusterVerfügbarkeit & Muster
SPECWL-SMCC SMT Mono-color Chip LED Compact, 624 nm, Rot
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]624 nm
Emittierte FarbeRot 
Spitzen-Wellenlänge [typ.]632 nm
Lichtstärke [typ.]110 mcd
Durchlassspannung [typ.]2 V
ChiptechnologieAlInGaP 
Abstrahlwinkel Phi 0° [typ.]120 °
Betriebstemperatur -40 °C up to +85 °C
MontageartSMT 
Länge1 mm
Höhe0.25 mm
Verfügbarkeit prüfen
SPECWR-PHD Stiftleisten - Zweireihig, –, –

Anstehende PCN

Aufgrund einer anstehenden PCN wird in Kürze eine Änderung am Bauteil durchgeführt. Anbei finden Sie die entsprechende PCN. Bei weiteren Fragen wenden Sie sich bitte an Ihren Vertriebsmitarbeiter.

Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -40 °C up to +105 °C
VerpackungBeutel 
TypGerade 
GenderStiftleiste 
Pins40 
MontageartTHT 
Nennstrom3 A
Arbeitsspannung250 V (AC)
Raster2.54 mm
Kontaktwiderstand20 mΩ
Länge50.8 mm
Verfügbarkeit prüfen
SPECWR-USB Mini/Micro Connectors, –, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -40 °C up to +85 °C
VerpackungTape and Reel 
Interface typType B 
TypHorizontal 
AusführungMit Pegs- High Current 
GenderBuchse 
Pins
MontageartSMT 
Nennstrom3 A
Arbeitsspannung30 V (AC)
Kontaktwiderstand30 mΩ
Verfügbarkeit prüfen
SPECWS-DISV Small Compact SMT Flat Actuator with Top Tape 1.27 mm, –, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -40 °C up to +85 °C
VerpackungTape and Reel 
Verpackungseinheit2000 
Pins
Raster1.27 mm
Poles
Länge6.25 mm
DampfphasenprozessJa 
Betätigungskraft500 g
Elektrische Lebensdauer1000 Cycles
Actuator farbeWeiß 
WaschbarJa 
Verfügbarkeit prüfen
SPECWS-TASV SMT Tact Switch 6x6 mm, –, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -40 °C up to +85 °C
VerpackungTape and Reel 
Verpackungseinheit1000 
Nennstrom0.05 A
Dampfphasenprozessnicht spezifiziert 
Höhe5 mm
Betätigungskraft160 g
Elektrische Lebensdauer1000000 Cycles
Actuator farbeSchwarz 
Verfügbarkeit prüfen
SPECWA-SSTII Steel Spacer Stud, metric, internal/internal, –, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -55 °C up to +150 °C
Schlüsselweite5 mm
InnengewindeM2.5 
VerpackungKarton 
Länge12 mm
Verfügbarkeit prüfen
SPECWA-SMSI SMT Stahl Spacer mit Innengewinde M2, –, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -55 °C up to +150 °C
InnengewindeM2 
Innendurchmesser2.8 mm
Außendurchmesser4.35 mm
VerpackungTape and Reel 
Verpackungseinheit1200 
Länge1.5 mm
Verfügbarkeit prüfen
SPECWR-USB Type C Connectors, –, –

Anstehende PCN

Aufgrund einer anstehenden PCN wird in Kürze eine Änderung am Bauteil durchgeführt. Anbei finden Sie die entsprechende PCN. Bei weiteren Fragen wenden Sie sich bitte an Ihren Vertriebsmitarbeiter.

Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -40 °C up to +105 °C
VerpackungTape and Reel 
Verpackungseinheit700 
Interface typType C 
TypHorizontal 
GenderBuchse 
Pins24 
MontageartTHR 
Leiterplattendicke1.6 mm
Nennstrom5 A
Arbeitsspannung48 V (AC)
Kontaktwiderstand30 mΩ
Pin Länge1.9 mm
Verfügbarkeit prüfen
SPECWR-PHD Stiftleisten - Einreihig, –, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -40 °C up to +105 °C
VerpackungBeutel 
TypGerade 
GenderStiftleiste 
Pins
MontageartTHT 
Nennstrom3 A
Arbeitsspannung250 V (AC)
Raster2.54 mm
Kontaktwiderstand20 mΩ
Länge5.08 mm
Verfügbarkeit prüfen
SPECWR-PHD Stiftleisten - Einreihig, –, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -40 °C up to +105 °C
VerpackungBeutel 
TypGerade 
GenderStiftleiste 
Pins
MontageartTHT 
Nennstrom3 A
Arbeitsspannung250 V (AC)
Raster2.54 mm
Kontaktwiderstand20 mΩ
Länge7.62 mm
Verfügbarkeit prüfen
SPECWR-PHD Stiftleisten - Einreihig, –, –

Anstehende PCN

Aufgrund einer anstehenden PCN wird in Kürze eine Änderung am Bauteil durchgeführt. Anbei finden Sie die entsprechende PCN. Bei weiteren Fragen wenden Sie sich bitte an Ihren Vertriebsmitarbeiter.

Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -40 °C up to +105 °C
VerpackungBeutel 
TypGerade 
GenderStiftleiste 
Pins
MontageartTHT 
Nennstrom3 A
Arbeitsspannung250 V (AC)
Raster2.54 mm
Kontaktwiderstand20 mΩ
Länge15.24 mm
Verfügbarkeit prüfen
SPECWR-FPC Zero Insertion Force Connectors - 0.50mm, –, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -25 °C up to +85 °C
VerpackungTape and Reel 
Verpackungseinheit4000 
TypHorizontal 
Pins40 
MontageartSMT 
Nennstrom0.4 A
Arbeitsspannung50 V (AC)
Raster0.5 mm
Kontaktwiderstand30 mΩ
Länge25.7 mm
Actuator farbeSchwarz 
Verfügbarkeit prüfen
SPECWE-XTAL Schwingquarz, –, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Frequenz24 MHz
Frequenz±20ppm 
Stabilität30 ppm
Belastungskapazität18 pF
Betriebstemperatur -40 °C up to +85 °C
MontageartSMT 
Länge3.2 mm
Höhe0.8 mm
Verfügbarkeit prüfen