IC-Hersteller Renesas

IC-Hersteller (103)

Renesas RZ/T2M

High-performance Multi-function MPU Realizing High-speed Processing and High Precision Control for Industrial AC Servos and Controllers

Details

TopologieSonstige Topologie
IC-Revision2.00

Beschreibung

RZ/T2M is an industry-leading high-performance multi-function MPU that realizes high-speed processing, high precision control, and functional safety required for industrial equipment such as AC servos and industrial motors. Powered by dual Arm® Cortex®-R52 cores with a maximum frequency of 800MHz for real-time control and embedded with a large tightly coupled memory (576KB) directly connected to the CPU to realize high-performance real-time processing, RZ/T2M enables low latency access by arranging the peripherals for motor control to the LLPP (Low Latency Peripheral Port) that is directly connected to the CPU. RZ/T2M has a multi-protocol encoder interface that supports various absolute encoder protocols such as A-format™, EnDat, and BiSS®. Additionally, RZ/T2M has a 3-port Gigabit Ethernet switch supporting the TSN standard and EtherCAT slave controller. RZ/T2M realizes high speed and highly precise motor control and industrial Ethernet communication such as EtherCAT, PROFINET RT/IRT and EtherNet/IP on a single chip.

Eigenschaften

  • CPU: Arm® Cortex®-R52 x 2, maximum operating frequency 800MHz
  • 3-port Gigabit Ethernet switch with TSN
  • Trigonometric function accelerator
  • Memory: Tightly coupled memory 576KB (with ECC), internal RAM 2MB (with ECC)
  • Industrial Ethernet: EtherCAT®, PROFINET® RT/IRT, EtherNet/IP™, etc.
  • Encoder interface: 2ch (supports A-format™, EnDat, BiSS®, HIPERFACE® DSL, FA-CODER)
  • Functional safety support up to SIL3
  • Motor current loop < 1µs
  • Octa/Quad SPI support
  • PWM: 3-phase complementary PWM output for dual motor control​
  • ADC: 12-bit x 2 units
  • ΔΣ I/F: 6ch
  • Package: 320-pin BGA, 225-pin BGA, 176-pin QFP, 128-pin QFP
  • Voltage: Core 1.1V, I/O 3.3/1.8V

Typische Anwendungen

  • AC servo, Industrial motor, Inverter, Robot, Motion controller

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
λDom typ.(nm)
Emittierte Farbe
λPeak typ.(nm)
IV typ.(mcd)
VF typ.(V)
Chiptechnologie
50% typ.(°)
L(µH)
IR(A)
ISAT(A)
RDC(mΩ)
fres(MHz)
Pins
Mittelstift Ø (Value)(mm)
Plug OD(mm)
Arbeitsspannung(V (AC))
Verpackung
Interface typ
Gender
Poles
L(mm)
Dampfphasenprozess
H(mm)
Betätigungskraft(g)
Elektrische Lebensdauer(Cycles)
Actuator-Farbe
Waschbar
Z @ 100 MHz(Ω)
Zmax(Ω)
Testbedingung Zmax
IR 2(mA)
Testbedingung IR 2
Z @ 1 GHz(Ω)
Typ
CCh typ.(pF)
CCh max.(pF)
VCh min.(V)
VCh max.(V)
VCh Clamp ESD(V)
VTrig ESD(V)
VESD Contact(kV)
Bauform
Datenrate
PoE
Ports
Tab
Improved CMRR
Betriebstemperatur
LED
PHY-Chipmodus
Montageart
Shield Tabs
Muster
WL-SMCW SMT Mono-color Chip LED Waterclear, 570 nm, Hellgrün
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]570 nm
Emittierte FarbeHellgrün 
Spitzen-Wellenlänge [typ.]572 nm
Lichtstärke [typ.]40 mcd
Durchlassspannung [typ.]2 V
ChiptechnologieAlInGaP 
Abstrahlwinkel Phi 0° [typ.]140 °
VerpackungTape and Reel 
Länge2 mm
Höhe0.7 mm
Bauform0805 
Betriebstemperatur -40 °C up to +85 °C
MontageartSMT 
WL-SMCW SMT Mono-color Chip LED Waterclear, 625 nm, Rot
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]625 nm
Emittierte FarbeRot 
Spitzen-Wellenlänge [typ.]630 nm
Lichtstärke [typ.]150 mcd
Durchlassspannung [typ.]2 V
ChiptechnologieAlInGaP 
Abstrahlwinkel Phi 0° [typ.]140 °
VerpackungTape and Reel 
Länge2 mm
Höhe0.7 mm
Bauform0805 
Betriebstemperatur -40 °C up to +85 °C
MontageartSMT 
WE-VE ULC ESD Suppressor, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Länge1 mm
Höhe0.34 mm
(Kanal) Eingangskapazität [typ.]0.2 pF
(Kanal) Eingangskapazität [max.]0.8 pF
Kanal Betriebsspannung [min.]-5 V
Kanal Betriebsspannung [max.]5 V
Kanal ESD Klemmspannung17 V
Ansteuerungsspannung ESD Method100 V
ESD Kontact-Entladungsfähigkeit8 kV
Bauform0402 
Betriebstemperatur -40 °C up to +85 °C
MontageartSMT 
WE-LQS SMT-Speicherdrossel, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität2.2 µH
Nennstrom5.4 A
Sättigungsstrom7.5 A
Gleichstromwiderstand14 mΩ
Eigenresonanzfrequenz60 MHz
Länge6 mm
Höhe4.5 mm
Bauform6045 
Betriebstemperatur -40 °C up to +125 °C
MontageartSMT 
WE-LQS SMT-Speicherdrossel, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität4.7 µH
Nennstrom4.1 A
Sättigungsstrom7 A
Gleichstromwiderstand19 mΩ
Eigenresonanzfrequenz30 MHz
Länge8 mm
Höhe4.2 mm
Bauform8040 
Betriebstemperatur -40 °C up to +125 °C
MontageartSMT 
WE-RJ45 LAN Übertrager, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität350 µH
Länge21.25 mm
Höhe13.5 mm
Datenrate100BASE-TX 
PoEkein-PoE 
Ports1x1 
Tab PositionUnten 
Verbesserte Common Mode EntstörungNein 
Betriebstemperatur 0 °C up to +70 °C
LED (Links-Rechts)grün-gelb 
PHY-Chipmoduscurrent & voltage 
MontageartTHT 
Shield TabsNein 
WR-PHD Stiftleisten - Zweireihig, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom3 A
Pins30 
Arbeitsspannung250 V (AC)
VerpackungBeutel 
GenderStiftleiste 
Länge38.1 mm
TypGerade 
Betriebstemperatur -40 °C up to +105 °C
MontageartTHT 
WR-PHD Stiftleisten - Zweireihig, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom3 A
Pins40 
Arbeitsspannung250 V (AC)
VerpackungBeutel 
GenderStiftleiste 
Länge50.8 mm
TypGerade 
Betriebstemperatur -40 °C up to +105 °C
MontageartTHT 
WR-PHD Stiftleisten, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom1 A
Pins20 
Arbeitsspannung100 V (AC)
VerpackungTube 
GenderStiftleiste 
Länge12.7 mm
TypGerade 
Betriebstemperatur -40 °C up to +105 °C
MontageartSMT 
WR-DC Power Jacks, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
ProduktserieWR-DC Power Jacks
Nennstrom5 A
Mittelstift Ø2 mm
Recommended Plug outer Ø5.5 mm
Arbeitsspannung30 V (AC)
VerpackungBeutel 
TypAbgewinkelt 
Betriebstemperatur -40 °C up to +85 °C
MontageartTHT 
WS-DISV Small Compact SMT Flat Actuator with Top Tape 1.27 mm, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
VerpackungTape and Reel 
Poles
Länge8.79 mm
DampfphasenprozessJa 
Betätigungskraft500 g
Elektrische Lebensdauer1000 Cycles
Actuator farbeWeiß 
WaschbarJa 
Betriebstemperatur -40 °C up to +85 °C
WS-TASV SMT Tact Switch 4.5x4.5 mm with Height 3.8mm, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom0.05 A
VerpackungTape and Reel 
Dampfphasenprozessnicht spezifiziert 
Höhe3.8 mm
Betätigungskraft160 g
Elektrische Lebensdauer1000000 Cycles
Actuator farbeSchwarz 
WaschbarNein 
Betriebstemperatur -40 °C up to +85 °C
WR-PHD Stiftleisten - Einreihig, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom3 A
Pins
Arbeitsspannung250 V (AC)
VerpackungBeutel 
GenderStiftleiste 
Länge7.62 mm
TypGerade 
Betriebstemperatur -40 °C up to +105 °C
MontageartTHT 
WR-USB Standard Connectors, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom1.5 A
Pins
Arbeitsspannung30 V (AC)
VerpackungTray 
Interface typType A 
GenderBuchse 
TypHorizontal 
Betriebstemperatur -40 °C up to +105 °C
MontageartTHT 
WR-PHD Buchsenleisten - Zweireihig, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom3 A
Pins12 
Arbeitsspannung250 V (AC)
VerpackungTray 
GenderBuchsenleiste 
Länge15.74 mm
TypAbgewinkelt 
Betriebstemperatur -40 °C up to +105 °C
MontageartTHT 
WE-TMSB SMT-Ferrit, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
ProduktserieWE-TMSB SMT-Ferrit
Nennstrom1 A
Länge1 mm
Höhe0.5 mm
Impedanz @ 100 MHz160 Ω
Maximale Impedanz280 Ω
Maximale Impedanz550 MHz 
Nennstrom 21000 mA
Nennstrom 2ΔT = 40 K 
Impedanz @ 1 GHz250 Ω
TypHochstrom 
Bauform0402 
Betriebstemperatur -55 °C up to +125 °C
MontageartSMT