IC manufacturers AnDAPT Inc

IC manufacturers (96)

AnDAPT Inc AnD8400EB | Demoboard AnD8400

Overview

TopologyBuck Converter
Input voltage4.5-17 V
Switching frequency500-800 kHz
Output 15.5 V / 6 A
Output 25.5 V / 6 A
Output 35.5 V / 6 A
Output 45.5 V / 6 A
IC revision1.1

Description

The AnD8400EB is a ready to use Evaluation Board to evaluate the Quad-Buck AnD8400 PMIC. Simply apply PVIN, then measure default settings of 0.7V on the 4 VOUT terminals. To change VOUT, adjust the resistor divider ratio according to: R2 = Vfb * R1 / ( VOUT - Vfb) kΩ, or use the WebAdapter tool and select your desired VOUT. The tool reports will provide the resistor required location and value. Optionally, the Bucks may be modified as needed by the WebAdapter design tool and downloaded over the USB cable. The .HAX file downloads to the AnD8400 Adaptable PMIC while the .HEX file downloads to the flash memory. Functionality may be extended using On-Demand WebAmP tools.

Features

  • Demonstrates AnD8400 Adaptable PMIC:
    • Four 6A Synchronous Buck Regulators
    • Four 0.2A auxiliary LDOs: 1.2V, 1.8V, 2.5V, 3.3V
    • Sequencing
  • WebAdapter™ or WebAmP™ Tool Downloads Configuration Files:
    • .HAX file to configure the device directly
    • .HEX file (Intel HEX) to program on-board flash

Typical applications

  • Powering server, processor, memory, storage, network switcher and router platforms
  • Powering FPGA, processor, SSD, subsystem power control & sequencing
  • On-demand power management, multi-rail power integration

Products

Order Code Data­sheet Simu­lation Downloads Product seriesλDom typ.
(nm)
Emitting ColorλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chip Technology50% typ.
(°)
MountIR
(A)
Working Voltage
(V (DC))
CTol. CVR
(V (DC))
SizeOperating TemperatureDF
(%)
RISOCeramic TypeL
(mm)
W
(mm)
Fl
(mm)
L
(µH)
IRP,40K
(A)
ISAT,10%
(A)
ISAT,30%
(A)
RDC
(mΩ)
fres
(MHz)
MaterialEndurance
(h)
Operating TemperatureIRIPPLE
(mA)
Z
(mΩ)
ILeak
(µA)
Ø D
(mm)
PinsRowsH
(mm)
GenderTypeIR
(A)
Packaging Samples
150060GS75000SPEC
25 files WL-SMCW SMT Mono-color Chip LED Waterclear 525 Green 515 430 3.2 InGaN 140 SMT 0603 -40 °C up to +85 °C 1.6 0.8 -40 °C up to +85 °C 0.7 Tape and Reel
150060RS75000SPEC
25 files WL-SMCW SMT Mono-color Chip LED Waterclear 625 Red 630 250 2 AlInGaP 140 SMT 0603 -40 °C up to +85 °C 1.6 0.8 -40 °C up to +85 °C 0.7 Tape and Reel
744316100SPEC
8 files WE-HCI SMT Flat Wire High Current Inductor SMT 11.5 5040 -40 °C up to +150 °C 5.5 5.3 1 14.8 5.5 11.5 4.75 158 Superflux -40 °C up to +150 °C 2 4 11.5
865080553014SPEC
8 files WCAP-ASLI Aluminum Electrolytic Capacitors V-Chip SMT220 µF ±20% 35 8.0 x 10.5 -55 °C up to +105 °C 140.454545 MΩ 10.5 8.3 2000 -55 °C up to +105 °C 570 210 77 8 15" Tape & Reel
885012206095SPEC
8 files WCAP-CSGP MLCCs 50 V(DC)100 nF ±10% 50 0603 -55 °C up to +125 °C 35 GΩ X7R Class II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012106012SPEC
8 files WCAP-CSGP MLCCs 10 V(DC)4.7 µF ±20% 10 0603 -55 °C up to +85 °C 100.02 GΩ X5R Class II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012107006SPEC
8 files WCAP-CSGP MLCCs 6.3 V(DC)47 µF ±20% 6.3 0805 -55 °C up to +85 °C 100.002 GΩ X5R Class II 2 1.25 0.5 1.25 7" Tape & Reel
694108106102SPEC
6 files WR-DC DC Power Jack Right Angled SMT Ø 6.4 with 4 soldering pads & pegs SMT 5 24 -40 °C up to +85 °C100 MΩ -40 °C up to +85 °C Right Angled 5 Tape and Reel
61300311121SPEC
6 files WR-PHD 2.54 mm THT Pin Header THT 250 -40 °C up to +105 °C1000 MΩ 7.62 3 Single Pin Header Straight 3 Bag
61300411121SPEC
6 files WR-PHD 2.54 mm THT Pin Header THT 250 -40 °C up to +105 °C1000 MΩ 10.16 4 Single Pin Header Straight 3 Bag
61300421121SPEC
6 files WR-PHD 2.54 mm THT Dual Pin Header THT 250 -40 °C up to +105 °C1000 MΩ 5.08 4 Dual Pin Header Straight 3 Bag
Samples
Order Code Data­sheet Simu­lation Downloads Product seriesλDom typ.
(nm)
Emitting ColorλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chip Technology50% typ.
(°)
MountIR
(A)
Working Voltage
(V (DC))
CTol. CVR
(V (DC))
SizeOperating TemperatureDF
(%)
RISOCeramic TypeL
(mm)
W
(mm)
Fl
(mm)
L
(µH)
IRP,40K
(A)
ISAT,10%
(A)
ISAT,30%
(A)
RDC
(mΩ)
fres
(MHz)
MaterialEndurance
(h)
Operating TemperatureIRIPPLE
(mA)
Z
(mΩ)
ILeak
(µA)
Ø D
(mm)
PinsRowsH
(mm)
GenderTypeIR
(A)
Packaging Samples