IC manufacturers AnDAPT Inc

IC manufacturers (96)

AnDAPT Inc AnD7220 | Demoboard AnD7220EB

DrMOS Controller & Dual Sync Buck PMIC

Overview

TopologyBuck Converter
Input voltage12 V
Output 10.7 V / 10 A

Description

The AnD7200 Adaptable PMIC uses AnDAPT AmP™ advanced technology consisting of fully flexible digital fabric embedded with high performance analog blocks. The AnD7200consists of one configurable DrMOS controller, two 10A high current synchronous Buck regulators along with an integrated sequencer and four additional auxiliary LDOs. The AnD7200is fully tested and ready for use in designs. The AnD7200Buck regulators use voltage-mode control. The user can modify output voltages and rail sequencing using external resistors or WebAdapterTM online tool. The sequencer can be programmed based on either timed delays or Power Good (PGOOD) signals. Adaptable PMICs provide fastest prototyping and time-to-market, while providing best-in-class performance and flexibility. The Adaptable PMIC is optimized to power high-end processors by integrating multiple power rails into single-chip designs.

Features

  • Demonstrates AnD7220 or AnD7202 Adaptable PMIC:
  • One DrMOS Buck Regulator
  • One 10A Synchronous Buck Regulator
  • One 6A Synchronous Buck Regulator
  • Two LDOs (AnD7220) or two Load Switches (AnD7202)
  • Four 0.2A auxiliary LDOs: 1.2V, 1.8V, 2.5V, 3.3V
  • Sequencing
  • WebAdapter™ or WebAmP™ Tool Downloads Configuration Files:
  • .HAX file to configure the device directly
  • .HEX file (Intel HEX) to program on-board flash

Typical applications

  • On-demand power management, multi-rail power integration / Powering server, processor, memory, storage, network switcher and router platforms / Powering FPGA, processor, SSD, subsystem power control& sequencing

Products

Order Code Data­sheet Simu­lation Downloads Product seriesλDom typ.
(nm)
Emitting ColorλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chip Technology50% typ.
(°)
MountIR
(A)
Working Voltage
(V (DC))
CTol. CVR
(V (DC))
SizeOperating TemperatureDF
(%)
RISOCeramic TypeL
(mm)
W
(mm)
Fl
(mm)
L
(µH)
IRP,40K
(A)
ISAT,10%
(A)
ISAT,30%
(A)
RDC
(mΩ)
fres
(MHz)
MaterialLR
(µH)
Endurance
(h)
Operating TemperatureIRIPPLE
(mA)
Z
(mΩ)
ILeak
(µA)
Ø D
(mm)
PinsRowsH
(mm)
GenderTypeIR
(A)
Packaging Samples
150060GS75000SPEC
25 files WL-SMCW SMT Mono-color Chip LED Waterclear 525 Green 515 430 3.2 InGaN 140 SMT 0603 -40 °C up to +85 °C 1.6 0.8 -40 °C up to +85 °C 0.7 Tape and Reel
150060RS75000SPEC
25 files WL-SMCW SMT Mono-color Chip LED Waterclear 625 Red 630 250 2 AlInGaP 140 SMT 0603 -40 °C up to +85 °C 1.6 0.8 -40 °C up to +85 °C 0.7 Tape and Reel
744314110SPEC
8 files WE-HCI SMT Flat Wire High Current Inductor SMT 7050 -40 °C up to +150 °C 7 6.9 1.1 19.6 6 13 3.15 135 Superflux 0.78 -40 °C up to +150 °C 2 4.8
744325072SPEC
8 files WE-HCI SMT Flat Wire High Current Inductor SMT 1050 -40 °C up to +150 °C 10.5 10.2 0.72 37.8 14 35 1.3 115 Superflux 0.6 -40 °C up to +150 °C 2 4.7
744301025SPEC
8 files WE-HCM SMT High Current Flat Wire Inductor 1190 -40 °C up to +125 °C 11.3 11 0.25 56 54.4 64.7 0.32 MnZn 0.25 8.9 38
865080553014SPEC
8 files WCAP-ASLI Aluminum Electrolytic Capacitors V-Chip SMT220 µF ±20% 35 8.0 x 10.5 -55 °C up to +105 °C 140.454545 MΩ 10.5 8.3 2000 -55 °C up to +105 °C 570 210 77 8 15" Tape & Reel
885012206095SPEC
8 files WCAP-CSGP MLCCs 50 V(DC)100 nF ±10% 50 0603 -55 °C up to +125 °C 35 GΩ X7R Class II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012106019SPEC
8 files WCAP-CSGP MLCCs 25 V(DC)220 nF ±20% 25 0603 -55 °C up to +85 °C 3.52.3 GΩ X5R Class II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012207098SPEC
8 files WCAP-CSGP MLCCs 50 V(DC)100 nF ±10% 50 0805 -55 °C up to +125 °C 2.55 GΩ X7R Class II 2 1.25 0.5 0.8 7" Tape & Reel
885012107006SPEC
8 files WCAP-CSGP MLCCs 6.3 V(DC)47 µF ±20% 6.3 0805 -55 °C up to +85 °C 100.002 GΩ X5R Class II 2 1.25 0.5 1.25 7" Tape & Reel
694108106102SPEC
6 files WR-DC DC Power Jack Right Angled SMT Ø 6.4 with 4 soldering pads & pegs SMT 5 24 -40 °C up to +85 °C100 MΩ -40 °C up to +85 °C Right Angled 5 Tape and Reel
61300211121SPEC
6 files WR-PHD 2.54 mm THT Pin Header THT 250 -40 °C up to +105 °C1000 MΩ 5.08 2 Single Pin Header Straight 3 Bag
61300311121SPEC
6 files WR-PHD 2.54 mm THT Pin Header THT 250 -40 °C up to +105 °C1000 MΩ 7.62 3 Single Pin Header Straight 3 Bag
61300421121SPEC
6 files WR-PHD 2.54 mm THT Dual Pin Header THT 250 -40 °C up to +105 °C1000 MΩ 5.08 4 Dual Pin Header Straight 3 Bag
Samples
Order Code Data­sheet Simu­lation Downloads Product seriesλDom typ.
(nm)
Emitting ColorλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chip Technology50% typ.
(°)
MountIR
(A)
Working Voltage
(V (DC))
CTol. CVR
(V (DC))
SizeOperating TemperatureDF
(%)
RISOCeramic TypeL
(mm)
W
(mm)
Fl
(mm)
L
(µH)
IRP,40K
(A)
ISAT,10%
(A)
ISAT,30%
(A)
RDC
(mΩ)
fres
(MHz)
MaterialLR
(µH)
Endurance
(h)
Operating TemperatureIRIPPLE
(mA)
Z
(mΩ)
ILeak
(µA)
Ø D
(mm)
PinsRowsH
(mm)
GenderTypeIR
(A)
Packaging Samples