IC manufacturers Intel

IC manufacturers (103)

Intel MAX 10 | Demoboard MAX 10 FPGA (10M08S, 144-EQFP)

revolutionize non-volatile integration by delivering advanced processing capabilities in a low-cost, single chip small form factor programmable logic device

Overview

TopologyOther Topology
IC revision1.2

Description

Altera’s MAX® 10 FPGAs revolutionize non-volatile integration by delivering advanced processing capabilities in a low-cost, single chip small form factor programmable logic device. Building upon the single chip heritage of previous MAX device families, densities range from 2K – 50K LEs, using either single or dual-core voltage supplies. The MAX 10 FPGA family encompasses both advanced small wafer scale packaging (3mm x 3mm) and high I/O pin count packages offerings.MAX 10 FPGAs are built on TSMC’s 55 nm embedded NOR flash technology, enabling instant-on functionality. Integrated features include analog-to-digital converters (ADCs) and dual configuration flash allowing you to store and dynamically switch between two images on a single chip. Unlike CPLDs, MAX 10 FPGAs also include full-featured FPGA capabilities, such as Nios® II soft core embedded processor support, digital signal processing (DSP) blocks, and soft DDR3 memory controllers.

Features

  • 8,000 logic elements (LE)
  • 378 kilobits (Kb) M9K memory
  • 32 – 172 (KB) user flash memory
  • One analog-to-digital (ADC) converter, 1 million samples per second (MSPS),12-bit
  • JTAG header for external USB-Blaster™, USB-Blaster II, or Ethernet Blasterdownload cable
  • Flash storage for two configuration images (factory and user)
  • Dual-image self-configuration via Programmer Object File (.pof)
  • Temporary engineering debug of FPGA design via SRAM Object File (.sof)
  • 50 MHz oscillator connected to FPGA global clock input
  • 8 analog input I/O, 14 Arduino I/O, 40 general purpose I/O
  • 5 red user-defined LEDs
  • One green LED to show power from USB cable
  • One reconfiguration push button (SW2)
  • One device-wide reset of all registers, push button (SW1)
  • User DIP switch (SW3)
  • The board is powered by USB cable (from PC or wall jack)
  • One green power-on LED (D6)
  • Probe points for manual, multi-meter measurement of current to calculatepower consumption (TP2 - TP5) or to verify voltages on the selected internalnodes (TP1, TP6 - TP9)

Products

Order Code
Data­sheet
Simu­lation
Downloads
Status
Product series
L(µH)
IR(mA)
ISAT(A)
RDC(mΩ)
fres(MHz)
H(mm)
W(mm)
IRP,40K(A)
ISAT,30%(A)
RDC typ.(mΩ)
VOP(V)
Mount
Z @ 100 MHz(Ω)
Zmax(Ω)
Test Condition Zmax
IR 2(mA)
RDC max.(mΩ)
Type
Samples
SPEC
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Inductance0.33 µH
Saturation Current11.1 A
Self Resonant Frequency140 MHz
Height1.2 mm
Width3 mm
Performance Rated Current7.4 A
Saturation Current @ 30%13.3 A
DC Resistance19 mΩ
Operating Voltage80 V
MountSMT 
DC Resistance22.8 mΩ
SPEC
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Inductance4.7 µH
Saturation Current3.8 A
Self Resonant Frequency30 MHz
Height1.2 mm
Width3 mm
Performance Rated Current1.7 A
Saturation Current @ 30%4.75 A
DC Resistance267.7 mΩ
Operating Voltage80 V
MountSMT 
DC Resistance307.8 mΩ
SPEC
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Inductance10 µH
Rated Current450 mA
Saturation Current0.125 A
DC Resistance500 mΩ
Self Resonant Frequency25 MHz
Height1.25 mm
Width1.2 mm
MountSMT 
Rated Current 2650 mA
DC Resistance625 mΩ
TypeLow RDC 
SPEC
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Rated Current300 mA
Height0.5 mm
Width0.5 mm
MountSMT 
Impedance @ 100 MHz220 Ω
Maximum Impedance360 Ω
Maximum Impedance450 MHz 
Rated Current 2900 mA
DC Resistance350 mΩ
TypeWide Band 
SPEC
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Rated Current2000 mA
Height0.8 mm
Width0.8 mm
MountSMT 
Impedance @ 100 MHz30 Ω
Maximum Impedance40 Ω
Maximum Impedance1000 MHz 
Rated Current 23000 mA
DC Resistance40 mΩ
TypeHigh Current 
SPEC
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Rated Current2000 mA
Height0.8 mm
Width0.8 mm
MountSMT 
Impedance @ 100 MHz60 Ω
Maximum Impedance110 Ω
Maximum Impedance600 MHz 
Rated Current 23000 mA
DC Resistance40 mΩ
TypeHigh Current 
SPEC
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Rated Current1500 mA
Height0.9 mm
Width1.2 mm
MountSMT 
Impedance @ 100 MHz220 Ω
Maximum Impedance330 Ω
Maximum Impedance300 MHz 
Rated Current 22000 mA
DC Resistance50 mΩ
TypeHigh Current