IC manufacturers Intel

IC manufacturers (95)

Intel MAX 10 | Demoboard MAX 10 FPGA (10M08S, 144-EQFP)

revolutionize non-volatile integration by delivering advanced processing capabilities in a low-cost, single chip small form factor programmable logic device

Overview

TopologyOther Topology
IC revision1.2

Description

Altera’s MAX® 10 FPGAs revolutionize non-volatile integration by delivering advanced processing capabilities in a low-cost, single chip small form factor programmable logic device. Building upon the single chip heritage of previous MAX device families, densities range from 2K – 50K LEs, using either single or dual-core voltage supplies. The MAX 10 FPGA family encompasses both advanced small wafer scale packaging (3mm x 3mm) and high I/O pin count packages offerings.MAX 10 FPGAs are built on TSMC’s 55 nm embedded NOR flash technology, enabling instant-on functionality. Integrated features include analog-to-digital converters (ADCs) and dual configuration flash allowing you to store and dynamically switch between two images on a single chip. Unlike CPLDs, MAX 10 FPGAs also include full-featured FPGA capabilities, such as Nios® II soft core embedded processor support, digital signal processing (DSP) blocks, and soft DDR3 memory controllers.

Features

  • 8,000 logic elements (LE)
  • 378 kilobits (Kb) M9K memory
  • 32 – 172 (KB) user flash memory
  • One analog-to-digital (ADC) converter, 1 million samples per second (MSPS),12-bit
  • JTAG header for external USB-Blaster™, USB-Blaster II, or Ethernet Blasterdownload cable
  • Flash storage for two configuration images (factory and user)
  • Dual-image self-configuration via Programmer Object File (.pof)
  • Temporary engineering debug of FPGA design via SRAM Object File (.sof)
  • 50 MHz oscillator connected to FPGA global clock input
  • 8 analog input I/O, 14 Arduino I/O, 40 general purpose I/O
  • 5 red user-defined LEDs
  • One green LED to show power from USB cable
  • One reconfiguration push button (SW2)
  • One device-wide reset of all registers, push button (SW1)
  • User DIP switch (SW3)
  • The board is powered by USB cable (from PC or wall jack)
  • One green power-on LED (D6)
  • Probe points for manual, multi-meter measurement of current to calculatepower consumption (TP2 - TP5) or to verify voltages on the selected internalnodes (TP1, TP6 - TP9)

Products

Order Code Data­sheet Simu­lation Downloads Product seriesL
(µH)
IR
(mA)
ISAT
(A)
RDC
(mΩ)
fres
(MHz)
H
(mm)
W
(mm)
IRP,40K
(A)
ISAT,30%
(A)
RDC typ.
(mΩ)
V
(V)
MountZ @ 100 MHz
(Ω)
Zmax
(Ω)
Test Condition ZmaxIR 2
(mA)
RDC max.
(mΩ)
Type Samples
744383340033SPEC
9 files WE-MAPI SMT Power Inductor 0.33 11.1 140 1.2 3 7.4 13.3 19 80 SMT 22.8
74438334047SPEC
9 files WE-MAPI SMT Power Inductor 4.7 3.8 30 1.2 3 1.7 4.75 267.7 80 SMT 307.8
74479777310SPEC
8 files WE-PMI Power Multilayer Inductor 10 450 0.125 500 25 1.25 1.2 SMT 650 625 Low RDC
742792780SPEC
8 files WE-CBF SMT EMI Suppression Ferrite Bead 300 0.5 0.5 SMT 220 360 450 MHz 900 350 Wide Band
742792609SPEC
8 files WE-CBF SMT EMI Suppression Ferrite Bead 2000 0.8 0.8 SMT 30 40 1000 MHz 3000 40 High Current
742792602SPEC
9 files WE-CBF SMT EMI Suppression Ferrite Bead 2000 0.8 0.8 SMT 60 110 600 MHz 3000 40 High Current
742792022SPEC
9 files WE-CBF SMT EMI Suppression Ferrite Bead 1500 0.9 1.2 SMT 220 330 300 MHz 2000 50 High Current
824013
6 files
Samples
Order Code Data­sheet Simu­lation Downloads Product seriesL
(µH)
IR
(mA)
ISAT
(A)
RDC
(mΩ)
fres
(MHz)
H
(mm)
W
(mm)
IRP,40K
(A)
ISAT,30%
(A)
RDC typ.
(mΩ)
V
(V)
MountZ @ 100 MHz
(Ω)
Zmax
(Ω)
Test Condition ZmaxIR 2
(mA)
RDC max.
(mΩ)
Type Samples