IC-Hersteller Onsemi

IC-Hersteller (103)

Onsemi NCL30386 | Demoboard NCL30386LED1GEVB

Dimmable Power Factor Corrected Quasi-Resonant Primary Side Current-Mode Controller for LED Lighting with thermal foldback

Details

TopologieSperrwandler
Eingangsspannung100-265 V
Ausgang 140 V / 1.5 A
IC-Revision1

Beschreibung

The NCL30386 is a power factor corrected flyback controller targeting isolated constant current LED drivers. The controller operates in a quasi-resonant mode to provide high efficiency. Thanks to a novel control method, the device is able to tightly regulate a constant LED current from the primary side. This removes the need for secondary side feedback circuitry, its biasing and for an optocoupler. The device is highly integrated with a minimum number of external components. A robust suite of safety protection is built in to simplify the design. This device is specifically intended for very compact space efficient designs and supports analog and digital dimming with two dedicated dimming inputs control ideal for Smart LED Lighting applications.

Eigenschaften

Integrated HV start up current source

  • Fast startup, Low standby power & Wide output operation range
  • Digital PSR CC loop control

    • Constant Brightness Regulation - <±2%
  • Digital PSR CV loop control

    • Good start up performance at cold temperature condition
  • Digital PFC loop algorithm

    • Over 0.9 PF at half load 230 Vac and Under 10% THD at half load universal input
  • Valley Lock out and Frequency Foldback

    • High efficiency at wide input and output range
  • Analog/PWM Dimming input signal treatment for analog output

    • Precise dimming CC tolerance, Wide operation range and no audible noise
  • Optional Dimming Curve

    • Linear dimming curve (L) and Qdratic dimming curve (S)
  • Secondary Diode and Output Short Protection

    • Avoids overheating in fault condition
  • Open and Shorted LED Protection

    • Robust fault handling of common LED system faults
  • VCC Undervoltage and overvoltage protection

    • Robust fault handling

Typische Anwendungen

  • Integral LED Bulbs / Integrated LED Drive Electronics / LED Light Engines / LED Driver Power Supplies

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
Pins
PCB/Kabel/Panel
Modularity
Typ
Wire Section
C
VR(V (AC))
Sicherheitsklasse
dV/dt(V/µs)
DF @ 1 kHz(%)
RISO
Raster(mm)
L(mm)
B(mm)
H(mm)
Verpackung
Tol. C
Bauform
Betriebstemperatur
Q(%)
DF(%)
Keramiktyp
Fl(mm)
L(µH)
IR(A)
ISAT,10%(A)
RDC max.(Ω)
fres(MHz)
Version
Endurance(h)
IRIPPLE(mA)
ILeak(µA)
Ø D(mm)
Muster
WR-TBL Series 101 - 5.00 mm Horizontal Entry Modular, 3, Kabelschutzprinzip
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
PCB/Kabel/PanelPCB 
ModularityJa 
TypHorizontal 
Wire Section 26 to 14 (AWG) 0.5 to 2.5 (mm²)
Raster5 mm
Länge15 mm
Höhe12.6 mm
VerpackungKarton 
Betriebstemperatur -40 °C up to +105 °C
Nennstrom16 A
WCAP-FTXX Folienkondensatoren, –, Across the mains
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität150 nF
Nennspannung310 V (AC)
SicherheitsklasseX2 
Spannungsanstiegsgeschwindigkeit300 V/µs
Verlustfaktor0.1 %
Isolationswiderstand30 GΩ
Raster10 mm
Länge13 mm
Breite7 mm
Höhe12 mm
VerpackungLose 
Kapazität±10% 
BauformRaster 10 mm 
Betriebstemperatur -40 °C up to +105 °C
WCAP-FTXX Folienkondensatoren, –, Across the mains
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität470 nF
Nennspannung310 V (AC)
SicherheitsklasseX2 
Spannungsanstiegsgeschwindigkeit220 V/µs
Verlustfaktor0.1 %
Isolationswiderstand21.28 GΩ
Raster15 mm
Länge18 mm
Breite8 mm
Höhe14 mm
VerpackungLose 
Kapazität±10% 
BauformRaster 15 mm 
Betriebstemperatur -40 °C up to +105 °C
WE-TI Tonneninduktivität, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Länge6 mm
Breite6 mm
Höhe6.5 mm
Bauform6065 
Betriebstemperatur -40 °C up to +125 °C
Induktivität10 µH
Nennstrom1.85 A
Sättigungsstrom 12.5 A
Gleichstromwiderstand0.05 Ω
Eigenresonanzfrequenz28 MHz
VersionGestanzt 
WCAP-ATLL Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität1000 µF
Nennspannung50 V (AC)
Raster7.5 mm
Länge25 mm
VerpackungAmmopack 
Kapazität±20% 
Verlustfaktor10 %
Endurance 7000
Rippelstrom2676 mA
Leckstrom500 µA
Durchmesser16 mm
WCAP-CSGP MLCCs 16 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 pF
Nennspannung16 V (AC)
Isolationswiderstand10 GΩ
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Verpackung7" Tape & Reel 
Kapazität±5% 
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Güte1000 %
KeramiktypNP0 Klasse I 
Pad Dimension0.4 mm
WCAP-CSGP MLCCs 6.3 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität10 µF
Nennspannung6.3 V (AC)
Isolationswiderstand0.01 GΩ
Länge2 mm
Breite1.25 mm
Höhe1.25 mm
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor10 %
KeramiktypX7R Klasse II 
Pad Dimension0.5 mm
WCAP-CSGP MLCCs 16 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität10 nF
Nennspannung16 V (AC)
Isolationswiderstand10 GΩ
Länge2 mm
Breite1.25 mm
Höhe0.8 mm
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor3.5 %
KeramiktypX7R Klasse II 
Pad Dimension0.5 mm
WCAP-CSGP MLCCs 16 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität22 nF
Nennspannung16 V (AC)
Isolationswiderstand10 GΩ
Länge2 mm
Breite1.25 mm
Höhe0.8 mm
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor3.5 %
KeramiktypX7R Klasse II 
Pad Dimension0.5 mm
WCAP-CSGP MLCCs 16 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 nF
Nennspannung16 V (AC)
Isolationswiderstand5 GΩ
Länge2 mm
Breite1.25 mm
Höhe0.8 mm
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor3.5 %
KeramiktypX7R Klasse II 
Pad Dimension0.5 mm
WCAP-CSGP MLCCs 16 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität220 nF
Nennspannung16 V (AC)
Isolationswiderstand2.3 GΩ
Länge2 mm
Breite1.25 mm
Höhe1.25 mm
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor3.5 %
KeramiktypX7R Klasse II 
Pad Dimension0.5 mm
WCAP-CSGP MLCCs 25 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität1 µF
Nennspannung25 V (AC)
Isolationswiderstand0.5 GΩ
Länge2 mm
Breite1.25 mm
Höhe1.25 mm
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor5 %
KeramiktypX7R Klasse II 
Pad Dimension0.5 mm
750342613
Flyback Transformer, –, –
Simu­lation
Downloads
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Produktserie Flyback Transformer