IC-Hersteller Onsemi

IC-Hersteller (103)

Onsemi FAN9611 | Demoboard RD-573

Interleaved Dual CrCM PFC Controller

Details

TopologieLLC Resonanzwandler
Eingangsspannung176-264 V
Schaltfrequenz16.5-525 kHz
Ausgang 180 V / 6.25 A
Ausgang 25 V / 2 A
Ausgang 315 V / 0.2 A
IC-Revision1.0

Beschreibung

This reference design supports inclusion of 2-phases interleave BCM PFC controllerFAN9611, Advanced Secondary Side LLC Resonant Converter Controller withSynchronous Rectifier Control FAN7688, and Fairchild Integrated Power SwitchFSL206MR; in design of a 1KW power supply for commercial audio amplifier. Thisdocument should be used in conjunction with the FAN9611, FAN7688 and FSL206MRdatasheets as well as Fairchild’s application notes and technical support team.

Eigenschaften

Sync-Lock™ Interleaving Technology for 180° Out-of-Phase Synchronization Under All ConditionsAutomatic Phase Disable at Light LoadDead-Phase Detect Protection2.0A Sink, 1.0A Source, High-Current Gate DriversHigh Power Factor, Low Total Harmonic DistortionVoltage-Mode Control with (VIN)2 FeedforwardClosed-Loop Soft-Start with User-Programmable Soft-Start Time for Reduced OvershootMinimum Restart Frequency to Avoid Audible NoiseMaximum Switching Frequency ClampBrownout Protection with Soft RecoveryNon-Latching OVP on FB Pin and Latching Second-Level Protection on OVP PinOpen-Feedback ProtectionPower-Limit and Current Protection for Each PhaseLow Startup Current of 80µA TypicalWorks with DC and 50Hz to 400Hz AC Inputs

Typische Anwendungen

  • Solar Micro Inverters
  • Networking and Telecom Power Supplies
  • Large Screen LCD-TV, PDP-TV, RP-TV Power
  • High-Efficiency Desktop and Server Power Supplies
  • 100-100 W AC-DC Power Supplies

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
Pins
PCB/Kabel/Panel
Modularity
Typ
Wire Section
λDom typ.(nm)
Farbe
λPeak typ.(nm)
IV typ.(mcd)
VF typ.(V)
Chiptechnologie
50% typ.(°)
C
Sicherheitsklasse
dV/dt(V/µs)
DF @ 1 kHz(%)
RISO
Raster(mm)
Verpackung
Tol. C
Bauform
Betriebstemperatur
Q(%)
DF(%)
Keramiktyp
Fl(mm)
Endurance(h)
IRIPPLE(mA)
ILeak(µA)
Ø D(mm)
IR(A)
L(mH)
RDC max.(mΩ)
VR(V (AC))
VT(V (AC))
Material
L(mm)
B(mm)
H(mm)
Montageart
VRMS(V)
VDC(V)
VBR(V)
IPeak(A)
Wmax(J)
PDiss(W)
VDE-Zulassung
Muster
WR-TBL Series 101 - 5.00 mm Horizontal Entry Modular, 3, Kabelschutzprinzip
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
PCB/Kabel/PanelPCB 
ModularityJa 
TypHorizontal 
Wire Section 26 to 14 (AWG) 0.5 to 2.5 (mm²)
Raster5 mm
VerpackungKarton 
Betriebstemperatur -40 °C up to +105 °C
Nennstrom16 A
Länge15 mm
Höhe12.6 mm
MontageartTHT 
VDE-Zulassung40022614 
WE-CMB Stromkompensierte Netzdrossel, 4, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
BauformXL 
Betriebstemperatur -40 °C up to +125 °C
Nennstrom8 A
Induktivität2.2 mH
Gleichstromwiderstand14 mΩ
Nennspannung250 V (AC)
Prüfspannung1500 V (AC)
MaterialMnZn 
Länge30 mm
Breite21 mm
Höhe35 mm
MontageartTHT 
VDE-Zulassung40042670 
WE-VD Disk Varistor, –, 230 VAC
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform20 mm 
Betriebstemperatur -40 °C up to +105 °C
Durchmesser23 mm
Länge23 mm
Breite5.3 mm
Höhe27 mm
MontageartTHT 
Wechselstrom Betriebsspannung320 V
DC Betriebsspannung418 V
(Rückwärts-) Durchbruchspannung510 V
(Reverse) Peak Pulse Current10000 A
Energieabsorption382 J
Verlustleistung1 W
VDE-ZulassungJa 
WCAP-FTX2 Folienkondensatoren, –, Across the mains
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität1 µF
SicherheitsklasseX2 
Spannungsanstiegsgeschwindigkeit170 V/µs
Verlustfaktor0.1 %
Isolationswiderstand10 GΩ
Raster22.5 mm
VerpackungKarton 
Kapazität±10% 
BauformRaster 22.5 mm 
Betriebstemperatur -40 °C up to +105 °C
Nennspannung275 V (AC)
Länge26 mm
Breite11 mm
Höhe20 mm
MontageartBoxed THT 
WE-FI Funkentstördrossel, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -40 °C up to +105 °C
Nennstrom6.1 A
Induktivität0.15 mH
Gleichstromwiderstand45 mΩ
Länge27.5 mm
Breite13.6 mm
MontageartTHT 
WL-TMRC THT Mono-color Round Color, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]572 nm
FarbeHellgrün 
Spitzen-Wellenlänge [typ.]573 nm
Lichtstärke [typ.]140 mcd
Durchlassspannung [typ.]2.1 V
ChiptechnologieAlInGaP 
Abstrahlwinkel Phi 0° [typ.]40 °
VerpackungLose 
Bauform5 mm 
Betriebstemperatur -40 °C up to +85 °C
Länge5 mm
Breite5 mm
Höhe8.6 mm
MontageartTHT 
Verlustleistung0.075 W
WCAP-ATG5 Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität22 µF
Raster2 mm
VerpackungAmmopack 
Kapazität±20% 
Verlustfaktor14 %
Endurance 2000
Rippelstrom58 mA
Leckstrom5.5 µA
Durchmesser5 mm
Nennspannung25 V (AC)
Länge11 mm
WCAP-ATG5 Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 µF
Raster2.5 mm
VerpackungAmmopack 
Kapazität±20% 
Verlustfaktor14 %
Endurance 2000
Rippelstrom145 mA
Leckstrom25 µA
Durchmesser6.3 mm
Nennspannung25 V (AC)
Länge11 mm
WCAP-ATG5 Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität68 µF
Raster2.5 mm
VerpackungAmmopack 
Kapazität±20% 
Verlustfaktor10 %
Endurance 2000
Rippelstrom130 mA
Leckstrom34 µA
Durchmesser6.3 mm
Nennspannung50 V (AC)
Länge11 mm
WCAP-ATG5 Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität220 µF
Raster3.5 mm
VerpackungAmmopack 
Kapazität±20% 
Verlustfaktor14 %
Endurance 2000
Rippelstrom235 mA
Leckstrom55 µA
Durchmesser8 mm
Nennspannung25 V (AC)
Länge11.5 mm
WCAP-ATG5 Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität1000 µF
Raster5 mm
VerpackungAmmopack 
Kapazität±20% 
Verlustfaktor15 %
Endurance 2000
Rippelstrom540 mA
Leckstrom160 µA
Durchmesser10 mm
Nennspannung16 V (AC)
Länge12.5 mm
WCAP-ATLI Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität470 µF
Raster3.5 mm
VerpackungAmmopack 
Kapazität±20% 
Verlustfaktor14 %
Endurance 3000
Rippelstrom750 mA
Leckstrom47 µA
Durchmesser8 mm
Nennspannung10 V (AC)
Länge11.5 mm
WCAP-ATUL Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität820 µF
Raster7.5 mm
VerpackungTray 
Kapazität±20% 
Verlustfaktor9 %
Endurance 10000
Rippelstrom2340 mA
Leckstrom820 µA
Durchmesser18 mm
Nennspannung100 V (AC)
Länge41 mm
MontageartRadial THT 
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität390 µF
Raster10 mm
VerpackungTray 
Kapazität±20% 
Bauform35.0 x 40.0 
Betriebstemperatur -25 °C up to +105 °C
Verlustfaktor20 %
Endurance 3000
Rippelstrom1500 mA
Leckstrom1256.78 µA
Durchmesser35 mm
Nennspannung450 V (AC)
Länge42 mm
WCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität10 pF
Isolationswiderstand10 GΩ
Verpackung7" Tape & Reel 
Kapazität±5% 
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Güte600 %
KeramiktypNP0 Klasse I 
Pad Dimension0.5 mm
Nennspannung50 V (AC)
Länge2 mm
Breite1.25 mm
Höhe0.6 mm
WCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 pF
Isolationswiderstand10 GΩ
Verpackung7" Tape & Reel 
Kapazität±5% 
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Güte1000 %
KeramiktypNP0 Klasse I 
Pad Dimension0.5 mm
Nennspannung50 V (AC)
Länge2 mm
Breite1.25 mm
Höhe0.6 mm
WCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität470 pF
Isolationswiderstand10 GΩ
Verpackung7" Tape & Reel 
Kapazität±5% 
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Güte1000 %
KeramiktypNP0 Klasse I 
Pad Dimension0.5 mm
Nennspannung50 V (AC)
Länge2 mm
Breite1.25 mm
Höhe0.8 mm
WCAP-CSGP MLCCs 25 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 nF
Isolationswiderstand5 GΩ
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor3.5 %
KeramiktypX7R Klasse II 
Pad Dimension0.5 mm
Nennspannung25 V (AC)
Länge2 mm
Breite1.25 mm
Höhe0.8 mm
WCAP-CSGP MLCCs 25 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität220 nF
Isolationswiderstand2.3 GΩ
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor3.5 %
KeramiktypX7R Klasse II 
Pad Dimension0.5 mm
Nennspannung25 V (AC)
Länge2 mm
Breite1.25 mm
Höhe1.25 mm
WCAP-CSGP MLCCs 25 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität470 nF
Isolationswiderstand1.1 GΩ
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor3.5 %
KeramiktypX7R Klasse II 
Pad Dimension0.5 mm
Nennspannung25 V (AC)
Länge2 mm
Breite1.25 mm
Höhe1.25 mm
WCAP-CSGP MLCCs 25 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität1 µF
Isolationswiderstand0.5 GΩ
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor5 %
KeramiktypX7R Klasse II 
Pad Dimension0.5 mm
Nennspannung25 V (AC)
Länge2 mm
Breite1.25 mm
Höhe1.25 mm
WCAP-CSGP MLCCs 25 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität2.2 µF
Isolationswiderstand0.05 GΩ
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor10 %
KeramiktypX7R Klasse II 
Pad Dimension0.5 mm
Nennspannung25 V (AC)
Länge2 mm
Breite1.25 mm
Höhe1.25 mm
WCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität1 nF
Isolationswiderstand10 GΩ
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor2.5 %
KeramiktypX7R Klasse II 
Pad Dimension0.5 mm
Nennspannung50 V (AC)
Länge2 mm
Breite1.25 mm
Höhe0.8 mm
WCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität4.7 nF
Isolationswiderstand10 GΩ
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor2.5 %
KeramiktypX7R Klasse II 
Pad Dimension0.5 mm
Nennspannung50 V (AC)
Länge2 mm
Breite1.25 mm
Höhe0.8 mm
WCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität10 nF
Isolationswiderstand10 GΩ
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor2.5 %
KeramiktypX7R Klasse II 
Pad Dimension0.5 mm
Nennspannung50 V (AC)
Länge2 mm
Breite1.25 mm
Höhe0.8 mm
WCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität15 nF
Isolationswiderstand10 GΩ
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor2.5 %
KeramiktypX7R Klasse II 
Pad Dimension0.5 mm
Nennspannung50 V (AC)
Länge2 mm
Breite1.25 mm
Höhe0.8 mm
WCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität47 nF
Isolationswiderstand10 GΩ
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor2.5 %
KeramiktypX7R Klasse II 
Pad Dimension0.5 mm
Nennspannung50 V (AC)
Länge2 mm
Breite1.25 mm
Höhe0.8 mm
WCAP-CSGP MLCCs 25 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität10 µF
Isolationswiderstand0.01 GΩ
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform1206 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor10 %
KeramiktypX7R Klasse II 
Pad Dimension0.5 mm
Nennspannung25 V (AC)
Länge3.2 mm
Breite1.6 mm
Höhe1.6 mm
750342970
Power Transformer LLC, –, –
Simu­lation
Downloads
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Produktserie Power Transformer LLC
750343007
Power Inductor PFC, –, –
Simu­lation
Downloads
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Produktserie Power Inductor PFC
750343027
Power Transformer, –, –
Simu­lation
Downloads
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Produktserie Power Transformer
750343037
Flyback Transformer, –, –
Simu­lation
Downloads
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Produktserie Flyback Transformer
750343038
Power Inductor PFC, –, –
Simu­lation
Downloads
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Produktserie Power Inductor PFC