| Topologie | Sonstige Topologie |
| Schaltfrequenz | 10000-810000 kHz |
| IC-Revision | C |
The MAX® 10 FPGA development board provides a hardware platform for evaluating the performanceand features of the Altera® MAX 10 device.The development kit includes a RoHS- and CE-compliant MAX 10 FPGA Development board with thefollowing components:• Featured Devices:• MAX 10 FPGA (10M50D, dual supply, F484 package)• Enpirion® EN2342QI 4 A PowerSoC Voltage-Mode Synchronous Step-Down Converter withIntegrated Inductor Enpirion• EN6337QI 3 A High-Efficiency PowerSoC DC-DC Step-Down Converters with Integrated Inductor• Enpirion EP5358xUI 600 mA PowerSoC DC-DC Step-Down Converters with Integrated Inductor• MAX II CPLD – EPM1270M256C4N (On-board USB-Blaster™ II)• Programming and Configuration:• Embedded USB-Blaster II (JTAG)• Optional JTAG direct via 10-pin header• Memory Devices:• 64-Mx16 1 Gb DDR3 SDRAM with soft memory controller• 128-Mx8 1 Gb DDR3 SDRAM with soft memory controller• 512-Mb Quad serial peripheral interface (quad SPI) flash• Communication Ports:• Two Gigabit Ethernet (GbE) RJ-45 ports• Ethernet Port A (Bottom)• Ethernet Port B (Top)• One mini-USB2.0 UART• One high-definition multimedia interface (HDMI) video output• One universal high-speed mezzanine card (HSMC) connector• Two 12-pin Digilent Pmod™ compatible connectors• Analog:• Two MAX 10 FPGA analog-to-digital converter (ADC) SMA inputs• 2x10 ADC header• Potentiometer input to ADC• One external 16 bit digital-to-analog converter (DAC) device with SMA output• Clocking• 25 MHz single-ended, external oscillator clock source• Silicon labs clock generator with programmable frequency GUI• Mini-USB cable for on-board USB-Blaster™ II• 2A Power Supply and cord• Free Quartus® II Web Edition design software (download software and license from website)• Complete documentation• User manual, bill of materials, schematic, and board files
Artikel Nr. | Datenblatt | Simulation | Downloads | Status | Produktserie | λDom typ.(nm) | Emittierte Farbe | λPeak typ.(nm) | IV typ.(mcd) | VF typ.(V) | Chiptechnologie | 2θ50% typ.(°) | Pins | Gender | Arbeitsspannung(V (AC)) | IR(mA) | Poles | L(mm) | Dampfphasenprozess | H(mm) | Betätigungskraft(g) | Elektrische Lebensdauer(Cycles) | Actuator-Farbe | Waschbar | Z @ 100 MHz(Ω) | Zmax(Ω) | Testbedingung Zmax | IR 2(mA) | RDC max.(Ω) | Typ | Kanäle | Polarität | VCh max.(V) | VBR min.(V) | VCh Clamp ESD typ.(V) | VESD Contact(kV) | Datenrate | PoE | Ports | Tab | Improved CMRR | Betriebstemperatur | LED | PHY-Chipmodus | Montageart | Shield Tabs | MusterVerfügbarkeit & Muster | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | SPECWL-SMCW SMT Mono-color Chip LED Waterclear, 470 nm, Blau | Verfügbarkeit – | Downloads28 Dateien Strahldaten
| Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWL-SMCW SMT Mono-color Chip LED Waterclear | dominante Wellenlänge [typ.]470 nm | Emittierte FarbeBlau | Spitzen-Wellenlänge [typ.]465 nm | Lichtstärke [typ.]145 mcd | Durchlassspannung [typ.]3.2 V | ChiptechnologieInGaN | Abstrahlwinkel Phi 0° [typ.]140 ° | – | – | – | – | – | Länge1.6 mm | – | Höhe0.7 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +85 °C | – | – | MontageartSMT | – | –Verfügbarkeit prüfen | ||
![]() | SPECWL-SMCW SMT Mono-color Chip LED Waterclear, 570 nm, Hellgrün | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWL-SMCW SMT Mono-color Chip LED Waterclear | dominante Wellenlänge [typ.]570 nm | Emittierte FarbeHellgrün | Spitzen-Wellenlänge [typ.]572 nm | Lichtstärke [typ.]40 mcd | Durchlassspannung [typ.]2 V | ChiptechnologieAlInGaP | Abstrahlwinkel Phi 0° [typ.]140 ° | – | – | – | – | – | Länge1.6 mm | – | Höhe0.7 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +85 °C | – | – | MontageartSMT | – | –Verfügbarkeit prüfen | |||
![]() | SPECWE-CBF SMT-Ferrit, –, – | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-CBF SMT-Ferrit | – | – | – | – | – | – | – | – | – | – | Nennstrom1500 mA | – | Länge2 mm | – | Höhe0.9 mm | – | – | – | – | Impedanz @ 100 MHz220 Ω | Maximale Impedanz330 Ω | Maximale Impedanz300 MHz | Nennstrom 22000 mA | Gleichstromwiderstand0.05 Ω | TypHochstrom | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -55 °C up to +125 °C | – | – | MontageartSMT | – | –Verfügbarkeit prüfen | |||
![]() | SPECWE-TVS TVS Diode – Super Speed Series, –, – | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-TVS TVS Diode – Super Speed Series | – | – | – | – | Durchlassspannung [typ.]0.8 V | – | – | – | – | – | – | – | Länge4.9 mm | – | Höhe0.975 mm | – | – | – | – | – | – | – | – | – | – | Kanäle6+1 | PolaritätUnidirectional | Kanal Betriebsspannung [max.]5 V | (Rückwärts-) Durchbruchspannung [min.]6 V | Kanal ESD Klemmspannung [typ.]13 V | ESD Kontact-Entladungsfähigkeit8 kV | – | – | – | – | – | Betriebstemperatur -55 °C up to +85 °C | – | – | MontageartSMT | – | –Verfügbarkeit prüfen | |||
![]() | SPECWE-RJ45 LAN Übertrager, –, – | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-RJ45 LAN Übertrager | – | – | – | – | – | – | – | – | – | – | – | – | Länge28.3 mm | – | Höhe25.25 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datenrate1000BASE-T | PoEkein-PoE | Ports2x1 | Tab PositionOben/Unten | Verbesserte Common Mode EntstörungNein | Betriebstemperatur -40 °C up to +85 °C | LED (Links-Rechts)gelb-grün | PHY-Chipmoduscurrent | MontageartTHT | Shield TabsJa | –Verfügbarkeit prüfen | |||
![]() | SPECWS-DISV Small Compact SMT Flat Actuator with Top Tape 1.27 mm, –, – | Simulation– | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | – | – | – | – | – | – | – | Pins4 | – | – | – | Poles4 | Länge6.25 mm | DampfphasenprozessJa | – | Betätigungskraft500 g | Elektrische Lebensdauer1000 Cycles | Actuator farbeWeiß | WaschbarJa | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +85 °C | – | – | – | – | –Verfügbarkeit prüfen | |||
![]() | SPECWS-TASV SMT Tact Switch 4.5x4.5 mm with Height 3.8mm, –, – | Simulation– | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | – | – | – | – | – | – | – | – | – | – | Nennstrom50 mA | – | – | Dampfphasenprozessnicht spezifiziert | Höhe3.8 mm | Betätigungskraft160 g | Elektrische Lebensdauer1000000 Cycles | Actuator farbeSchwarz | WaschbarNein | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +85 °C | – | – | – | – | –Verfügbarkeit prüfen | |||
![]() | SPECWR-PHD Stiftleisten - Zweireihig, –, – | Simulation– | Verfügbarkeit – | Downloads7 Dateien | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWR-PHD Stiftleisten - Zweireihig | – | – | – | – | – | – | – | Pins10 | GenderStiftleiste | Arbeitsspannung250 V (AC) | Nennstrom3000 mA | – | Länge12.7 mm | – | – | – | – | – | – | – | – | – | – | – | TypGerade | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +105 °C | – | – | MontageartSMT | – | –Verfügbarkeit prüfen | |
![]() | SPECWR-PHD Stiftleisten - Einreihig, –, – | Simulation– | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWR-PHD Stiftleisten - Einreihig | – | – | – | – | – | – | – | Pins2 | GenderStiftleiste | Arbeitsspannung250 V (AC) | Nennstrom3000 mA | – | Länge5.08 mm | – | – | – | – | – | – | – | – | – | – | – | TypGerade | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +105 °C | – | – | MontageartTHT | – | –Verfügbarkeit prüfen | ||
![]() | SPECWR-PHD Stiftleisten - Zweireihig, –, – | Simulation– | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWR-PHD Stiftleisten - Zweireihig | – | – | – | – | – | – | – | Pins20 | GenderStiftleiste | Arbeitsspannung250 V (AC) | Nennstrom3000 mA | – | Länge25.4 mm | – | – | – | – | – | – | – | – | – | – | – | TypGerade | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +105 °C | – | – | MontageartTHT | – | –Verfügbarkeit prüfen | ||
![]() | SPECWR-COM HDMI Connectors, –, – | Simulation– | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWR-COM HDMI Connectors | – | – | – | – | – | – | – | Pins19 | GenderBuchse | Arbeitsspannung40 V (AC) | Nennstrom500 mA | – | – | – | – | – | – | – | – | – | – | – | – | – | TypHorizontal | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -25 °C up to +85 °C | – | – | MontageartSMT | – | –Verfügbarkeit prüfen | ||
![]() | SPECWR-PHD Buchsenleisten - Zweireihig, –, – | Simulation– | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWR-PHD Buchsenleisten - Zweireihig | – | – | – | – | – | – | – | Pins12 | GenderBuchsenleiste | Arbeitsspannung250 V (AC) | Nennstrom3000 mA | – | Länge15.74 mm | – | – | – | – | – | – | – | – | – | – | – | TypAbgewinkelt | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +105 °C | – | – | MontageartTHT | – | –Verfügbarkeit prüfen |
| Erwartete Verfügbarkeit | Eingehender Bestand | Menge |
|---|---|---|
| Aktuelle Verfügbarkeit | – | – |