IC-Hersteller Infineon Technologies

IC-Hersteller (108)

Infineon Technologies IM323-L6G | Demoboard EVAL-M1-IM323

iMotion™ modular application design kit

Details

TopologieMotor Drive
Eingangsspannung165-265 V
Schaltfrequenz100 kHz
IC-Revision1.0

Beschreibung

This user guide provides an overview of the evaluation board EVAL-M1-IM323 including its main features, key data, pin assignments, and mechanical dimensions.This evaluation board has been developed to provide initial support to customers in designing motor drive applications for major home appliances such as air conditioners, pumps, fans, and other variable-speed drives.The EVAL-M1-IM323 is part of the iMOTION™ modular application design kit (MADK). Together with a control board equipped with the M1 20-pin interface connector, such as the EVAL-M1-101T, it features and demonstrates the Infineon CIPOS™ Tiny intelligent power module (IPM) technology and advanced motion control engine (MCE 2.0) technology for permanent magnet motor drives. EVAL-M1-IM323 is based on the IM323-L6Gx CIPOS™ Tiny IPM. The IM323-L6Gx is designed to control 3-phase AC motors and permanent magnet motors in variable-speed drives. It works with a voltage of 600 V and provides a current rating of 15 A.

Eigenschaften

  • Input voltage 165 Vac to 265 Vac
  • Maximum 12 A input current at 165 Vac
  • Maximum 1500 W motor power output at 220 VAC
  • Inrush current limiter for circuit protection
  • On-board EMI filter and pass EMI standards EN55032
  • Auxiliary power supply with 15 V, 3.3 V
  • Overcurrent hardware protection and over temperature protection
  • Sensing of DC-link voltage
  • Thermistor output
  • PCB size is 180 mm × 140 mm, two layers with 1 oz. copper
  • RoHS compliant

Typische Anwendungen

  • Hood fan, Residential aircon - motor-, system control and monitoring, Residential heat pumps
  • Washer and dryer motor-control - quieter systems, Motor control and drives

Weiterführende Informationen

Von Infineon Technologies freigegebene Bauteile

Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
Pins
Anwendung
PCB/Kabel/Panel
Modularity
Wire Section
λDom typ.(nm)
Emittierte Farbe
λPeak typ.(nm)
IV typ.(mcd)
VF typ.(V)
Chiptechnologie
2θ50% typ.(°)
C
VR 2(V (DC))
Sicherheitsklasse
dV/dt(V/µs)
DF @ 1 kHz(%)
RISO
Raster(mm)
Verpackung
Tol. C
Bauform
Qmin.
DF(%)
Keramiktyp
Fl(mm)
Betriebstemperatur
Q
IRP,40K(A)
ISAT(A)
ISAT,10%(A)
ISAT,30%(A)
fres(MHz)
Package
Input
VCE max.(V)
IF max.(mA)
Testbedingung CTR
CTR min.(%)
CTR max.(%)
VISO(V (RMS))
Endurance(h)
IRIPPLE(mA)
ILeak(µA)
Ø D(mm)
G(mm)
Arbeitsspannung(V (AC))
Polarität
IR 1(mA)
Stranded Wire Section (AWG)
Stranded Wire Section (Metric)
Z @ 100 MHz(Ω)
Zmax(Ω)
Testbedingung Zmax
IR 2(mA)
RDC max.(mΩ)
Typ
IR(A)
L(mH)
VR(V (AC))
VT(V (AC))
Material
L(mm)
B(mm)
H(mm)
Montageart
VRMS(V)
VDC(V)
VBR(V)
IPeak(A)
Wmax(J)
PDiss(mW)
VDE-Zulassung
MusterVerfügbarkeit & Muster
Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
SPECWR-WTB 2.00 mm Stiftleisten, 2, –
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins2 
–
PCB/Kabel/PanelPCB 
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Isolationswiderstand1000 MΩ
Raster2 mm
VerpackungBeutel 
–
–
–
–
–
–
Betriebstemperatur -25 °C up to +85 °C
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Arbeitsspannung125 V (AC)
–
–
–
–
–
–
–
–
–
TypVertikal 
Nennstrom2 A
–
–
–
–
Länge6 mm
–
–
MontageartTHT 
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWR-TBL Serie 2509 - 9.52 mm Horizontal Entry Modular w. Rising Cage Clamp, 3, Käfigzugklemme
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins3 
AnwendungKäfigzugklemme 
PCB/Kabel/PanelPCB 
ModularityJa 
Wire Section 10 to 30 (AWG) 5.26 to 0.0509 (mm²)
–
–
–
–
–
–
–
–
–
–
–
–
–
Raster9.52 mm
VerpackungKarton 
–
–
–
–
–
–
Betriebstemperatur -30 °C up to +110 °C
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Arbeitsspannung750 V (AC)
Polarität03 
–
Stranded Wire Section (AWG)10 to 30 (AWG) 
Stranded Wire Section (Metric)5.26 to 0.0509 (mm²) 
–
–
–
–
–
TypHorizontaler Kabelabgang 
Nennstrom32 A
–
–
–
–
Länge28.56 mm
–
–
MontageartTHT 
–
–
–
–
–
–
VDE-Zulassung40013439 
–Verfügbarkeit prüfen
SPECWE-CMBNC Stromkompensierte Netzdrossel Nanokristallin, 4, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins4 
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
BauformXXL 
–
–
–
–
Betriebstemperatur -55 °C up to +125 °C
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Pin Länge5 mm
–
–
–
–
–
–
–
–
–
Gleichstromwiderstand9.5 mΩ
–
Nennstrom15 A
Induktivität7 mH
Nennspannung300 V (AC)
Prüfspannung2100 V (AC)
MaterialNanokristallin 
Länge46.5 mm
Breite27.5 mm
Höhe46 mm
MontageartTHT 
–
–
–
–
–
–
VDE-Zulassung40048238 
–Verfügbarkeit prüfen
SPECWR-PHD Buchsenleisten - Zweireihig, 20, –
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins20 
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Isolationswiderstand1000 MΩ
Raster2.54 mm
VerpackungTray 
–
–
–
–
–
–
Betriebstemperatur -40 °C up to +105 °C
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Arbeitsspannung250 V (AC)
–
–
–
–
–
–
–
–
–
TypAbgewinkelt 
Nennstrom3 A
–
–
–
–
Länge25.9 mm
–
–
MontageartTHT 
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWE-CBF SMT-Ferrit, –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
ProduktserieWE-CBF SMT-Ferrit
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Bauform1206 
–
–
–
Pad Dimension0.5 mm
Betriebstemperatur -55 °C up to +125 °C
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Nennstrom [1]2500 mA
–
–
Impedanz @ 100 MHz600 Ω
Maximale Impedanz650 Ω
Maximale Impedanz80 MHz 
Nennstrom 22500 mA
Gleichstromwiderstand70 mΩ
TypHochstrom 
Nennstrom1.5 A
–
–
–
–
Länge3.2 mm
Breite1.6 mm
Höhe1.1 mm
MontageartSMT 
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-FTXX Folienkondensatoren, –, Across the mains
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
AnwendungAcross the mains 
–
–
–
–
–
–
–
–
–
–
Kapazität1 µF
Nennspannung 2630 V (DC)
SicherheitsklasseX2 
Spannungsanstiegsgeschwindigkeit170 V/µs
Verlustfaktor0.1 %
Isolationswiderstand10 GΩ
Raster22.5 mm
VerpackungKarton 
Kapazität±10% 
BauformRaster 22.5 mm 
–
–
–
–
Betriebstemperatur -40 °C up to +105 °C
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Pin Länge4 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
Nennspannung310 V (AC)
–
–
Länge26 mm
Breite11 mm
Höhe20 mm
MontageartBoxed THT 
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-FTXX Folienkondensatoren, –, Across the mains
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
AnwendungAcross the mains 
–
–
–
–
–
–
–
–
–
–
Kapazität2.2 µF
Nennspannung 2630 V (DC)
SicherheitsklasseX2 
Spannungsanstiegsgeschwindigkeit170 V/µs
Verlustfaktor0.1 %
Isolationswiderstand4.55 GΩ
Raster22.5 mm
VerpackungKarton 
Kapazität±10% 
BauformRaster 22.5 mm 
–
–
–
–
Betriebstemperatur -40 °C up to +105 °C
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Pin Länge4 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
Nennspannung310 V (AC)
–
–
Länge26 mm
Breite15 mm
Höhe25 mm
MontageartBoxed THT 
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWE-PD2 SMT-Speicherdrossel, –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Bauform4532 
–
–
–
–
Betriebstemperatur -40 °C up to +125 °C
–
Performance Nennstrom3.5 A
Sättigungsstrom3.38 A
Sättigungsstrom 14.1 A
Sättigungsstrom @ 30%4.7 A
Eigenresonanzfrequenz85 MHz
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Gleichstromwiderstand71 mΩ
–
Nennstrom2.5 A
Induktivität0.0022 mH
–
–
MaterialNiZn 
Länge4 mm
Breite4.5 mm
Höhe3.2 mm
MontageartSMT 
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWL-SMCW SMT Mono-color Chip LED Waterclear, –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
dominante Wellenlänge [typ.]525 nm
Emittierte FarbeGrün 
Spitzen-Wellenlänge [typ.]515 nm
Lichtstärke [typ.]430 mcd
Durchlassspannung [typ.]3.2 V
ChiptechnologieInGaN 
Abstrahlwinkel Phi 0° [typ.]140 °
–
–
–
–
–
–
–
VerpackungTape and Reel 
–
Bauform0603 
–
–
–
–
Betriebstemperatur -40 °C up to +85 °C
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Länge1.6 mm
Breite0.8 mm
Höhe0.7 mm
MontageartSMT 
–
–
–
–
–
Verlustleistung105 mW
–
–Verfügbarkeit prüfen
SPECWCAP-ATG8 Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
Kapazität100 µF
–
–
–
–
–
Raster2 mm
VerpackungAmmopack 
–
–
–
Verlustfaktor16 %
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Endurance 2000
Rippelstrom176 mA
Leckstrom16 µA
Durchmesser5 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Nennspannung16 V (AC)
–
–
Länge11 mm
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-ATG8 Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
Kapazität220 µF
–
–
–
–
–
Raster2.5 mm
VerpackungAmmopack 
Kapazität±20% 
–
–
Verlustfaktor16 %
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Endurance 2000
Rippelstrom308 mA
Leckstrom35.2 µA
Durchmesser6.3 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Nennspannung16 V (AC)
–
–
Länge11 mm
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-ATG8 Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
Kapazität100 µF
–
–
–
–
–
Raster2.5 mm
VerpackungAmmopack 
Kapazität±20% 
–
–
Verlustfaktor12 %
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Endurance 2000
Rippelstrom231 mA
Leckstrom35 µA
Durchmesser6.3 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Nennspannung35 V (AC)
–
–
Länge11 mm
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-ATG5 Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
Kapazität220 µF
–
–
–
–
–
Raster3.5 mm
VerpackungAmmopack 
Kapazität±20% 
–
–
Verlustfaktor14 %
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Endurance 2000
Rippelstrom235 mA
Leckstrom55 µA
Durchmesser8 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Nennspannung25 V (AC)
–
–
Länge11.5 mm
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-AI3H Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
Kapazität680 µF
–
–
–
–
–
Raster10 mm
VerpackungTray 
Kapazität±20 
Bauform35.0 x 55.0 
–
Verlustfaktor20 %
–
–
Betriebstemperatur -25 °C up to +105 °C
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Endurance 3000
Rippelstrom2760 mA
Leckstrom1660 µA
Durchmesser35 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Nennspannung450 V (AC)
–
–
Länge55 mm
–
–
MontageartSnap-In 
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 25 V(DC), –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
Kapazität1 nF
–
–
–
–
Isolationswiderstand10 GΩ
–
Verpackung7" Tape & Reel 
Kapazität±5% 
Bauform0805 
–
–
KeramiktypNP0 Klasse I 
Pad Dimension0.5 mm
Betriebstemperatur -55 °C up to +125 °C
Güte1000 
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Nennspannung25 V (AC)
–
–
Länge2 mm
Breite1.25 mm
Höhe0.8 mm
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 25 V(DC), –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
Kapazität10 µF
–
–
–
–
Isolationswiderstand0.01 GΩ
–
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform1206 
Güte [1]600 
Verlustfaktor10 %
KeramiktypX7R Klasse II 
Pad Dimension0.5 mm
Betriebstemperatur -55 °C up to +125 °C
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Nennspannung25 V (AC)
–
–
Länge3.2 mm
Breite1.6 mm
Höhe1.6 mm
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-FTBE Folienkondensatoren, –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
Kapazität470 nF
Nennspannung 2504 V (DC)
–
Spannungsanstiegsgeschwindigkeit20 V/µs
Verlustfaktor1 %
Isolationswiderstand6.38 GΩ
Raster22.5 mm
VerpackungKarton 
Kapazität±10% 
BauformRaster 22.5 mm 
–
–
–
–
Betriebstemperatur -40 °C up to +85 °C
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Pin Länge4 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
Nennspannung630 V (AC)
–
–
Länge26 mm
Breite9 mm
Höhe18 mm
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-CSMH Mid and High Voltage, –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
Kapazität100 nF
–
–
–
–
Isolationswiderstand1 GΩ
–
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform1812 
–
Verlustfaktor2.5 %
KeramiktypX7R Klasse II 
Pad Dimension0.5 mm
Betriebstemperatur -55 °C up to +125 °C
Güte600 
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Nennspannung630 V (AC)
–
–
Länge4.5 mm
Breite3.2 mm
Höhe2 mm
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWE-VD Disk Varistor, –, 230 VAC
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
Anwendung230 VAC 
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Bauform14 mm 
–
–
–
–
Betriebstemperatur -40 °C up to +105 °C
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Durchmesser16.5 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Breite4.7 mm
Höhe20 mm
MontageartTHT 
Wechselstrom Betriebsspannung300 V
DC Betriebsspannung385 V
(Rückwärts-) Durchbruchspannung470 V
(Reverse) Peak Pulse Current6000 A
Energieabsorption175 J
Verlustleistung600 mW
VDE-ZulassungJa 
–Verfügbarkeit prüfen
SPECWL-OCPT DIP-4, –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
ProduktserieWL-OCPT DIP-4
–
–
–
–
–
–
–
–
–
Durchlassspannung [typ.]1.24 V
–
–
–
–
–
–
–
–
–
–
–
BauformDIP 4 
–
–
–
–
Betriebstemperatur -55 °C up to +110 °C
–
–
–
–
–
–
PackageDIP 4, Standard 
InputDC 
Kollektor Emitter Spannung35 V
Durchlassstrom60 mA
IF = 5 mA
VCE = 5 V
Current Transfer Ratio [min.]50 %
Current Transfer Ratio [max.]600 %
Isolationsspannung5000 V (RMS)
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
TypOptocoupler Phototransistor 
–
–
–
–
–
Länge8.5 mm
Breite4.58 mm
Höhe7.3 mm
MontageartTHT 
–
–
–
–
–
Verlustleistung200 mW
VDE-Zulassung40051484 
–Verfügbarkeit prüfen
750344798
SPECOffline-Transformer, –, –
Simu­lation–
Verfügbarkeit
–
Downloads–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Produktserie Offline-Transformer
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen