IC manufacturers Onsemi

IC manufacturers (103)

Onsemi NCL30000

Power Factor Corrected Dimmable LED Driver

Overview

TopologyFlyback Converter
Switching frequency300 kHz
IC revision1

Description

The NCL30000 is a switch mode power supply controller intended for low to medium power single stage power factor (PF) corrected LED Drivers. The device is designed to operate in critical conduction mode (CrM) and is suitable for flyback as well as buck topologies.Constant on time CrM operation is particularly suited for isolated flyback LED applications as the control scheme is straightforward and very high efficiency can be achieved even at low power levels. These are important in LED lighting to comply with regulatory requirements and meet overall system luminous efficacy requirements. In CrM, the switching frequency will vary with line and load and switching losses are low as recovery losses in the output rectifier are negligible since the current goes to zero prior to reactivating the main MOSFET switch.The device features a programmable on time limiter, zero current detect sense block, gate driver, trans-conductance error amplifier as well as all PWM control circuitry and protection functions required to implement a CrM switch mode power supply. Moreover, for high efficiency, the device features low startup current enabling fast, low loss charging of the VCC capacitor. The current sense protection threshold has been set at 500 mV to minimize power dissipation in the external sense resistor. To support the environmental operation range of Solid State Lighting, the device is specified across a wide junction temperature range of −40C to 125C.

Features

  • Very Low 24 A Typical Startup Current
  • Constant On Time PWM Control
  • Cycle-by-Cycle Current Protection
  • Low Current Sense Threshold of 500 mV
  • Low 2 mA Typical Operating Current
  • Source 500 mA/Sink 800 mA Totem Pole Gate Driver
  • Reference Design for TRIAC and Trailing Edge Line Dimmers
  • Wide Operating Temperature Range
  • No Input Voltage Sensing Requirement
  • Enable Function and Overvoltage Protection
  • These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS-Compliant

Typical applications

  • TRIAC Dimmable LED Based PAR Lamps
  • LED Based Down Lights
  • Commercial and Residential LED Fixtures
  • Power Factor Corrected Constant Voltage Supplies
  • LED Driver Power Supplies

Products

Order Code
Data­sheet
Simu­lation
Downloads
Status
Product series
ISAT,10%(A)
fres(MHz)
Version
IR(A)
L(µH)
RDC max.(Ω)
VR(V (AC))
VT(V (AC))
Material
L(mm)
W(mm)
H(mm)
Mount
IR(A)
L1(µH)
RDC max.(mΩ)
Samples
WE-TI Radial Leaded Wire Wound Inductor, 0.51 A, 3.3 MHz
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Saturation Current @ 10%0.51 A
Self Resonant Frequency3.3 MHz
VersionHeat Shrinking Tube 
Rated Current0.33 A
Inductance680 µH
DC Resistance4 Ω
Length8.5 mm
Width8.5 mm
Height5.5 mm
MountTHT 
WE-CMB NiZn Common Mode Power Line Choke, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
VersionTHT 
Rated Current3 A
Inductance30 µH
DC Resistance0.026 Ω
Rated Voltage250 V (AC)
Insulation Test Voltage1500 V (AC)
MaterialNiZn 
Length16 mm
Width7.5 mm
Height17.5 mm
MountTHT 
Rated Current3 A
Inductance [1]30 µH
DC Resistance [1]26 mΩ
WE-LF Common Mode Power Line Choke, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
VersionTHT 
Rated Current0.4 A
Inductance27000 µH
DC Resistance1.2 Ω
Rated Voltage250 V (AC)
Insulation Test Voltage1500 V (AC)
MaterialMnZn 
Length18 mm
Width18 mm
Height13 mm
MountTHT 
Rated Current0.4 A
Inductance [1]27000 µH
DC Resistance [1]1200 mΩ
750312594
Power Inductor, –, –
Simu­lation
Downloads
Status Activei| Production is active. Expected lifetime: >10 years.
Product series Power Inductor