IC-Hersteller Onsemi

IC-Hersteller (103)

Onsemi NCL30000

Power Factor Corrected Dimmable LED Driver

Details

TopologieSperrwandler
Schaltfrequenz300 kHz
IC-Revision1

Beschreibung

The NCL30000 is a switch mode power supply controller intended for low to medium power single stage power factor (PF) corrected LED Drivers. The device is designed to operate in critical conduction mode (CrM) and is suitable for flyback as well as buck topologies.Constant on time CrM operation is particularly suited for isolated flyback LED applications as the control scheme is straightforward and very high efficiency can be achieved even at low power levels. These are important in LED lighting to comply with regulatory requirements and meet overall system luminous efficacy requirements. In CrM, the switching frequency will vary with line and load and switching losses are low as recovery losses in the output rectifier are negligible since the current goes to zero prior to reactivating the main MOSFET switch.The device features a programmable on time limiter, zero current detect sense block, gate driver, trans-conductance error amplifier as well as all PWM control circuitry and protection functions required to implement a CrM switch mode power supply. Moreover, for high efficiency, the device features low startup current enabling fast, low loss charging of the VCC capacitor. The current sense protection threshold has been set at 500 mV to minimize power dissipation in the external sense resistor. To support the environmental operation range of Solid State Lighting, the device is specified across a wide junction temperature range of −40C to 125C.

Eigenschaften

  • Very Low 24 A Typical Startup Current
  • Constant On Time PWM Control
  • Cycle-by-Cycle Current Protection
  • Low Current Sense Threshold of 500 mV
  • Low 2 mA Typical Operating Current
  • Source 500 mA/Sink 800 mA Totem Pole Gate Driver
  • Reference Design for TRIAC and Trailing Edge Line Dimmers
  • Wide Operating Temperature Range
  • No Input Voltage Sensing Requirement
  • Enable Function and Overvoltage Protection
  • These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS-Compliant

Typische Anwendungen

  • TRIAC Dimmable LED Based PAR Lamps
  • LED Based Down Lights
  • Commercial and Residential LED Fixtures
  • Power Factor Corrected Constant Voltage Supplies
  • LED Driver Power Supplies

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
ISAT,10%(A)
fres(MHz)
Version
IR(A)
L(µH)
RDC max.(Ω)
VR(V (AC))
VT(V (AC))
Material
L(mm)
B(mm)
H(mm)
Montageart
IR 1(A)
L1(µH)
RDC1 max.(mΩ)
Muster
WE-TI Tonneninduktivität, 0.51 A, 3.3 MHz
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Sättigungsstrom 10.51 A
Eigenresonanzfrequenz3.3 MHz
VersionSchrumpfschlauch 
Nennstrom0.33 A
Induktivität680 µH
Gleichstromwiderstand4 Ω
Länge8.5 mm
Breite8.5 mm
Höhe5.5 mm
MontageartTHT 
WE-CMB NiZn Stromkompensierte Netzdrossel, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
VersionTHT 
Nennstrom3 A
Induktivität30 µH
Gleichstromwiderstand0.026 Ω
Nennspannung250 V (AC)
Prüfspannung1500 V (AC)
MaterialNiZn 
Länge16 mm
Breite7.5 mm
Höhe17.5 mm
MontageartTHT 
Nennstrom [1]3 A
Induktivität [1]30 µH
Gleichstromwiderstand [1]26 mΩ
WE-LF Stromkompensierte Netzdrossel, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
VersionTHT 
Nennstrom0.4 A
Induktivität27000 µH
Gleichstromwiderstand1.2 Ω
Nennspannung250 V (AC)
Prüfspannung1500 V (AC)
MaterialMnZn 
Länge18 mm
Breite18 mm
Höhe13 mm
MontageartTHT 
Nennstrom [1]0.4 A
Induktivität [1]27000 µH
Gleichstromwiderstand [1]1200 mΩ
750312594
Power Inductor, –, –
Simu­lation
Downloads
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Produktserie Power Inductor