| Topology | ADC |
| IC revision | D |
The ADC12DJ5200RF evaluation module (EVM) allows for the evaluation of device ADC12DJ5200RF. The ADC12DJ5200RF is a low-power, 12-bit, dual 5.2-GSPS/single 10.4-GSPS, RF-sampling analog-to-digital converter (ADC) with a buffered analog input, integrated digital down converter with programmable NCO and decimation settings (including undecimated 12- and 8-bit ADC output), which features a JESD204B/C interface. The EVM has transformer-coupled analog inputs to accommodate a wide range of signal sources and frequencies. An LMX2582 clock synthesizer and LMK04828 JESD204B/C clock generator are included on the EVM and can be configured to provide an ultra-low-jitter ADC device clock and SYSREF for a complete JESD204B/C subclass 1 clocking solution. The ADC12DJ5200RF, LMX2582, and LMK04828 are controlled through an easy-to-use software GUI enabling quick configuration for a variety of uses. The ADC12DJ5200RFEVM connects directly to the TSW14J57EVM data capture hardware via the high-speed FMC+ connector. High-speed data converter pro software (DATACONVERTERPRO-SW) is also available for data capture and analysis support when using the TSW14J57EVM.
Order Code | Datasheet | Simulation | Downloads | Status | Product series | L(µH) | ISAT,10%(A) | ISAT,30%(A) | IR,40K(A) | IRP,40K(A) | fres(MHz) | Size | Version | Pins | Mount | L(mm) | H(mm) | IR(A) | Working Voltage(V (AC)) | Operating Temperature | Z @ 100 MHz(Ω) | Zmax(Ω) | Test Condition Zmax | IR 2(mA) | RDC max.(mΩ) | Type | Samples | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | WE-PD SMT Power Inductor, 10 µH, 10.5 A | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-PD SMT Power Inductor | Inductance10 µH | Saturation Current @ 10%10.5 A | Saturation Current @ 30%13 A | Rated Current7.1 A | Performance Rated Current9.5 A | Self Resonant Frequency21 MHz | Size1210 | VersionStandard | Pins2 | MountSMT | Length12 mm | Height10 mm | Rated Current7.1 A | – | Operating Temperature -40 °C up to +125 °C | – | – | – | – | DC Resistance21 mΩ | – | ||||
![]() | WE-CBF SMT EMI Suppression Ferrite Bead, –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-CBF SMT EMI Suppression Ferrite Bead | – | – | – | – | – | – | Size0402 | VersionSMT | – | MountSMT | Length1 mm | Height0.5 mm | Rated Current0.5 A | – | Operating Temperature -55 °C up to +125 °C | Impedance @ 100 MHz120 Ω | Maximum Impedance200 Ω | Maximum Impedance600 MHz | Rated Current 21100 mA | DC Resistance200 mΩ | TypeWide Band | ||||
![]() | WR-PHD Pin Header - Single, –, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-PHD Pin Header - Single | – | – | – | – | – | – | – | – | Pins3 | MountTHT | Length7.62 mm | – | Rated Current3 A | Working Voltage250 V (AC) | Operating Temperature -40 °C up to +105 °C | – | – | – | – | – | TypeStraight |