IC manufacturers Qorvo

IC manufacturers (103)

Qorvo ACT4910QM‐121 | Demoboard ACT4910EVK1-121

Power Loss Protection with 6A eFuse

Overview

TopologyBuck Converter
Input voltage10.8-13.6 V
Switching frequency320-1130 kHz
Output 110.7 V / 2.5 A
IC revision1.0

Description

The EVK can be used as a standalone board if desired. However, to access the internal registers and to takefull advantage of the IC’s capability, the user must connect the EVK kit to a PC with Active Semi’s USB-TO-I2Cinterface dongle and use the GUI software. The EVK provides full access to the each converter’s input andoutput voltage, as well as all the digital control signals. This gives the user the flexibility to configure the EVKto match their real world system. Note that the ACT4910EVK1-121 is specifically configured for theACT4910QW121 IC.

Features

  • Wide 2.7-to-18V Operating Input Range
  • 24V Max Input Blocking Voltage
  • Adjustable Bus Voltage Start-Up Slew Rate for In-rush Current Control
  • Programmable up to 10A Input Current Limit
  • eFuse, Boost, and Buck UV/OV/OC Protection
  • Programmable 5V to 36V Boost Storage Voltage
  • Undetectable Transition from Input Supply to Capacitor Bank Power
  • Compatible with Different Types of Storage Caps: -Super Caps, Electrolytic, Tantalum, POSCAP etc.
  • ADC Monitoring of Critical Signals
  • Autonomous Health Monitoring for Detection of Earlier Storage Capacitor Failures
  • Configurable Interrupts to Inform Host for any Faults/Status Change

Typical applications

  • Solid State Drives / Hot Plug Devices
  • Backup Power
  • Industrial Applications

Products

Order Code
Data­sheet
Simu­lation
Downloads
Status
Product series
Pins
PCB/Cable/Panel
Modularity
Type
Wire Section
λDom typ.(nm)
Emitting Color
λPeak typ.(nm)
IV typ.(mcd)
VF typ.(V)
Chip Technology
50% typ.(°)
L(µH)
IRP,40K(A)
ISAT,30%(A)
RDC typ.(mΩ)
fres(MHz)
VOP(V)
Mount
L(mm)
H(mm)
IR(A)
Working Voltage(V (AC))
Operating Temperature
Samples
WR-TBL Series 213 - 5.00 mm Horiz.l Entry Modular, 2, Rising Cage Clamp
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Pins
PCB/Cable/PanelPCB 
ModularityYes 
TypeHorizontal 
Wire Section 26 to 16 (AWG) 0.5 to 1.5 (mm²)
MountTHT 
Length10 mm
Rated Current10 A
Working Voltage250 V (AC)
Operating Temperature -40 °C up to +105 °C
WR-PHD Pin Header - Single, 2, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Pins
TypeStraight 
MountTHT 
Length5.08 mm
Rated Current3 A
Working Voltage250 V (AC)
Operating Temperature -40 °C up to +105 °C
WE-MAPI SMT Power Inductor, 2, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Pins
Inductance2.2 µH
Performance Rated Current7.1 A
Saturation Current @ 30%9.2 A
DC Resistance22 mΩ
Self Resonant Frequency35 MHz
Operating Voltage80 V
MountSMT 
Length4.3 mm
Height3.1 mm
Rated Current5.2 A
Operating Temperature -40 °C up to +125 °C
WR-PHD Pin Header - Single, 4, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Pins
TypeStraight 
MountTHT 
Length10.16 mm
Rated Current3 A
Working Voltage250 V (AC)
Operating Temperature -40 °C up to +105 °C
WL-SMCW SMT Mono-color Chip LED Waterclear, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Dominant Wavelength [typ.]570 nm
Emitting ColorBright Green 
Peak Wavelength [typ.]572 nm
Luminous Intensity [typ.]40 mcd
Forward Voltage [typ.]2 V
Chip TechnologyAlInGaP 
Viewing Angle Phi 0° [typ.]140 °
MountSMT 
Length1.6 mm
Height0.7 mm
Operating Temperature -40 °C up to +85 °C