IC manufacturers Onsemi

IC manufacturers (103)

Onsemi NCV890430MW33 | Demoboard ONSEC-18-035

Automotive 0.6 A 2 MHz 100% Duty Cycle Step-Down Synchronous Regulator

Overview

TopologyBuck Converter
IC revisionAlpha

Description

The NCV890430 is a fixed-frequency Synchronous Buck regulator intended for Automotive, battery-connected applications that operate with up to a 45 V input supply. It is suitable for automotive systems requiring low noise and low shutdown currents that also need to operate at low input voltage close to the output voltage. A reset pin (with adjustable delay) simplifies interfacing with a microcontroller. This part also features an enable input that can either be connected to a low voltage (such as a micro-controller output) or high voltage (such as the battery input), and a synchronization input. The NCV890430 also provides several protection features expected in automotive power supply systems such as current limit, short circuit protection, and thermal shutdown. In addition, the high switching frequency produces low output voltage ripple even when using small inductor values and all-ceramic input output filter capacitors − forming a space-efficient switching regulator solution.

Features

  • Internal 550 mΩ P Channel and 300 mΩ N-Channel Power Switches
  • Capable of 100% Duty Cycle Operation
  • VIN operating range of 3.5 V to 37 V
  • Withstands Load Dump to 45 V
  • 2 MHz Free-Running Switching Frequency
  • Shutdown Current Less than 10 µA
  • High Voltage Enable Pin
  • Synchonization Input Pin
  • Maximum DC Output Current of at least 0.6A
  • Fixed Output Voltage (5.0 V, 3.3 V and 2.5 V Versions)
  • ± 2% Output Voltage Accuracy
  • DFN Package with Wettable Flanks (Pin Edge Plating Per JEDEC MO220)
  • NCV Prefix for Automotive Requiring Site and Control Changes
  • Pb-Free

Typical applications

  • Automotive Infotainment and Instrumentation / Automotive Body Applications / Rear View Camera
  • Linear Regulator Replacement

Products

Order Code
Data­sheet
Simu­lation
Downloads
Status
Product series
λDom typ.(nm)
Emitting Color
λPeak typ.(nm)
IV typ.(mcd)
VF typ.(V)
Chip Technology
50% typ.(°)
L(µH)
IR(A)
ISAT1(A)
ISAT2(A)
RDC max.(Ω)
fres(MHz)
IRP,40K(A)
ISAT(A)
ISAT,10%(A)
ISAT,30%(A)
Pins
Center pin Ø (Value)(mm)
Plug OD(mm)
Type
Working Voltage(V (DC))
Packaging
Interface Type
Variant
Gender
Mount
H(mm)
Operation Force(g)
Electrical Life(Cycles)
Actuator Color
Washable
Vaporphase process
Samples
WL-SMCW SMT Mono-color Chip LED Waterclear, 470 nm, Blue
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Dominant Wavelength [typ.]470 nm
Emitting ColorBlue 
Peak Wavelength [typ.]465 nm
Luminous Intensity [typ.]145 mcd
Forward Voltage [typ.]3.2 V
Chip TechnologyInGaN 
Viewing Angle Phi 0° [typ.]140 °
PackagingTape and Reel 
MountSMT 
Height0.7 mm
WL-SMCW SMT Mono-color Chip LED Waterclear, 525 nm, Green
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Dominant Wavelength [typ.]525 nm
Emitting ColorGreen 
Peak Wavelength [typ.]515 nm
Luminous Intensity [typ.]430 mcd
Forward Voltage [typ.]3.2 V
Chip TechnologyInGaN 
Viewing Angle Phi 0° [typ.]140 °
PackagingTape and Reel 
MountSMT 
Height0.7 mm
WE-PD2 SMT Power Inductor, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Inductance4.7 µH
Rated Current1.82 A
DC Resistance0.11 Ω
Self Resonant Frequency50 MHz
Performance Rated Current2.6 A
Saturation Current2.46 A
Saturation Current @ 10%2.9 A
Saturation Current @ 30%3.3 A
MountSMT 
Height3.2 mm
WR-DC Power Jacks, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Product seriesWR-DC Power Jacks
Rated Current5 A
Center pin Ø2 mm
Recommended Plug outer Ø5.5 mm
TypeRight Angled 
Working Voltage30 V (DC)
PackagingBag 
MountTHT 
WE-PMCI Power Molded Chip Inductor, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Inductance2.2 µH
Rated Current2 A
Saturation Current 11.2 A
Saturation Current 22.4 A
DC Resistance0.19 Ω
Self Resonant Frequency45 MHz
Performance Rated Current2 A
Saturation Current1.7 A
Saturation Current @ 10%1.2 A
Saturation Current @ 30%2.4 A
Pins
MountSMT 
Height1 mm
WR-USB Mini/Micro Connectors, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Rated Current1 A
Pins
TypeHorizontal 
Working Voltage30 V (DC)
PackagingTape and Reel 
Interface TypeType B 
Variantwith Pads & Pegs 
GenderReceptacle 
MountSMT 
WS-TASV J-Bend SMT Tact Switch 3.5x2.9 mm, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Rated Current0.05 A
PackagingTape and Reel 
Height1.7 mm
Operation Force350 g
Electrical Life200000 Cycles
Actuator ColorBlue 
WashableNo 
Vaporphase processnot specified