| Topologie | Sperrwandler |
| Eingangsspannung | 90-264 V |
| Ausgang 1 | 20 V / 3.25 A |
| IC-Revision | 1 |
The EVLACF01UC65 is a compact 65 W Active Clamp Flyback (ACF) converter designed to evaluate the STACF01A, ACF controller. The board can receive a universal AC input voltage and provides a selectable output voltage based on the USB Power Delivery specifications, from 5 V to 20 V.At the primary side, the STACF01A is paired with MasterGaN1L, a 600 V half-bridge enhancement mode GaN HEMT with high-voltage drivers.The STACF01A integrates a buck boost that allows to achieve low stand-by power consumption with a single transformer’s auxiliary winding.A synchronous rectification based on the SRK1004D is employed at the secondary side to enhance the efficiency.The STACF01A integrates a 800 V rated high-voltage startup, and offers a full set of protections and features, such as AC-Brownout, X-CAP discharge, overload and short-circuit protection, output overvoltage protection.
Universal AC input voltage: 90~264 VAC, 47~63 HzMaximum output power: 65 WSelectable output voltage: 5-9-15-20 VDCPeak efficiency:93% full load @90VACStand-by power consumption:60 mW@115V AC, 5 Vout68 mW@230 VAC, , 5 VoutCompact design: 60 x 35 x 22 mm (L,W,H). Power density: 23W/in3
Artikel Nr. | Datenblatt | Simulation | Downloads | Status | Produktserie | C | Tol. C | VR(V (AC)) | Bauform | Betriebstemperatur | DF(%) | RISO | L(mm) | B(mm) | H(mm) | Fl(mm) | Keramiktyp | Verpackung | Sicherheitsklasse | dV/dt(V/µs) | DF @ 1 kHz(%) | Raster(mm) | L(µH) | IR(A) | ISAT(A) | RDC(mΩ) | fres(MHz) | RDC max.(mΩ) | Montageart | Endurance(h) | IRIPPLE(mA) | ILeak(µA) | Ø D(mm) | Muster | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | WCAP-FTX2 Folienkondensatoren, 220 nF, ±10% | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-FTX2 Folienkondensatoren | Kapazität220 nF | Kapazität±10% | Nennspannung275 V (AC) | BauformRaster 10 mm | Betriebstemperatur -40 °C up to +105 °C | – | Isolationswiderstand30 GΩ | Länge13 mm | Breite8 mm | Höhe14 mm | – | – | VerpackungLose | SicherheitsklasseX2 | Spannungsanstiegsgeschwindigkeit300 V/µs | Verlustfaktor0.1 % | Raster10 mm | – | – | – | – | – | – | MontageartBoxed THT | – | – | – | – | ||||
![]() | WCAP-CSST Soft Termination, 470 nF, ±10% | Downloads5 Dateien | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSST Soft Termination | Kapazität470 nF | Kapazität±10% | Nennspannung500 V (AC) | Bauform1812 | Betriebstemperatur -55 °C up to +125 °C | Verlustfaktor2.5 % | Isolationswiderstand0.2 GΩ | Länge4.5 mm | Breite3.2 mm | Höhe2.5 mm | Pad Dimension0.5 mm | KeramiktypX7R Klasse II | Verpackung7" Tape & Reel | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
![]() | WCAP-ATG5 Aluminium-Elektrolytkondensatoren, 22 µF, +0%/-40% | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-ATG5 Aluminium-Elektrolytkondensatoren | Kapazität22 µF | Kapazität+0%/-40% | Nennspannung400 V (AC) | Bauform8.0 x 16.0 | Betriebstemperatur -25 °C up to +105 °C | Verlustfaktor15 % | – | Länge16 mm | – | – | – | – | VerpackungAmmopack | – | – | – | Raster3.5 mm | – | – | – | – | – | – | MontageartRadial THT | Endurance 2000 | Rippelstrom200 mA | Leckstrom264 µA | Durchmesser8 mm | ||||
![]() | WE-LQS SMT-Speicherdrossel, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-LQS SMT-Speicherdrossel | – | – | – | Bauform6045 | Betriebstemperatur -40 °C up to +125 °C | – | – | Länge6 mm | Breite6 mm | Höhe4.5 mm | – | – | – | – | – | – | – | Induktivität22 µH | Nennstrom2.1 A | Sättigungsstrom2.5 A | Gleichstromwiderstand89 mΩ | Eigenresonanzfrequenz15 MHz | – | MontageartSMT | – | – | – | – | ||||
![]() | WE-LQFS SMT-Speicherdrossel, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-LQFS SMT-Speicherdrossel | – | – | – | Bauform4818 | Betriebstemperatur -40 °C up to +125 °C | – | – | Länge4.8 mm | Breite4.8 mm | Höhe1.8 mm | – | – | – | – | – | – | – | Induktivität10 µH | Nennstrom1.61 A | Sättigungsstrom1.1 A | – | Eigenresonanzfrequenz45 MHz | Gleichstromwiderstand133 mΩ | MontageartSMT | – | – | – | – |