| Topologie | Abwärtswandler |
| IC-Revision | 1.0 |
The NCP4305 is high performance driver tailored to control a synchronous rectification MOSFET in switch mode power supplies.Thanks to its high performance drivers and versatility, it can be used in various topologies such as DCM or CCM flyback, quasi resonant flyback, forward and half bridge resonant LLC.The combination of externally adjustable minimum off - time and on - time blanking periods helps to fight the ringing induced by the PCB layout and other parasitic elements. A reliable and noise less operationof the SR system is insured due to the Self Synchronization feature. The NCP4305 also utilizes Kelvin connection of the driver to the MOSFET to achieve high efficiency operation at full load and utilizes a light load detection architecture to achieve high efficiency at light load.The precise turn−off threshold, extremely low turn−off delay time and high sink current capability of the driver allow the maximum synchronous rectification MOSFET conduction time and enables maximum SMPS efficiency. The high accuracy driver and 5 V gate clamp enables the use of GaN FETs.
Artikel Nr. | Datenblatt | Simulation | Downloads | Status | Produktserie | λDom typ.(nm) | Emittierte Farbe | λPeak typ.(nm) | λPeak B typ.(nm) | λPeak G typ.(nm) | λPeak R typ.(nm) | λDom B typ.(nm) | λDom G typ.(nm) | λDom R typ.(nm) | IV typ.(mcd) | IV B typ.(mcd) | IV G typ.(mcd) | IV R typ.(mcd) | VF typ.(V) | VF B typ.(V) | VF G typ.(V) | VF R typ.(V) | Chiptechnologie | 2θ50% typ.(°) | C | VR(V (AC)) | Sicherheitsklasse | dV/dt(V/µs) | DF @ 1 kHz(%) | RISO | Raster(mm) | L(mm) | B(mm) | H(mm) | Verpackung | L(µH) | IR(A) | ISAT,10%(A) | RDC max.(mΩ) | fres(MHz) | Version | Endurance(h) | IRIPPLE(mA) | ILeak(µA) | DF(%) | Ø D(mm) | Interface typ | Typ | Gender | Pins | Montageart | Leiterplattendicke(mm) | Arbeitsspannung(V (DC)) | G(mm) | Betriebstemperatur | Muster | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | WL-SMCW SMT Mono-color Chip LED Waterclear, 470 nm, Blau | Downloads28 Dateien Strahldaten
| Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWL-SMCW SMT Mono-color Chip LED Waterclear | dominante Wellenlänge [typ.]470 nm | Emittierte FarbeBlau | Spitzen-Wellenlänge [typ.]465 nm | – | – | – | – | – | – | Lichtstärke [typ.]145 mcd | – | – | – | Durchlassspannung [typ.]3.2 V | – | – | – | ChiptechnologieInGaN | Abstrahlwinkel Phi 0° [typ.]140 ° | – | – | – | – | – | – | – | Länge1.6 mm | Breite0.8 mm | Höhe0.7 mm | VerpackungTape and Reel | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | MontageartSMT | – | – | – | Betriebstemperatur -40 °C up to +85 °C | |||
![]() | WCAP-FTX2 Folienkondensatoren, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-FTX2 Folienkondensatoren | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Kapazität100 nF | Nennspannung275 V (AC) | SicherheitsklasseX2 | Spannungsanstiegsgeschwindigkeit300 V/µs | Verlustfaktor0.1 % | Isolationswiderstand30 GΩ | Raster10 mm | Länge13 mm | Breite7 mm | Höhe13 mm | VerpackungLose | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | MontageartBoxed THT | – | – | Pin Länge18 mm | Betriebstemperatur -40 °C up to +105 °C | ||||
![]() | WCAP-FTX2 Folienkondensatoren, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-FTX2 Folienkondensatoren | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Kapazität330 nF | Nennspannung275 V (AC) | SicherheitsklasseX2 | Spannungsanstiegsgeschwindigkeit260 V/µs | Verlustfaktor0.1 % | Isolationswiderstand30 GΩ | Raster12.5 mm | Länge15 mm | Breite8.5 mm | Höhe14 mm | VerpackungLose | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | MontageartBoxed THT | – | – | Pin Länge18 mm | Betriebstemperatur -40 °C up to +105 °C | ||||
![]() | WE-TI Tonneninduktivität, –, – | Downloads15 Dateien EDA-Modelle: Bauteile ZIP
Alle 15 Dateien als ZIP herunterladen | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-TI Tonneninduktivität | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Länge11 mm | Breite11 mm | Höhe19 mm | – | Induktivität100 µH | Nennstrom2.6 A | Sättigungsstrom 13.1 A | Gleichstromwiderstand90 mΩ | Eigenresonanzfrequenz3.6 MHz | VersionSchrumpfschlauch | – | – | – | – | – | – | – | – | – | MontageartTHT | – | – | – | Betriebstemperatur -40 °C up to +125 °C | |||
![]() | WL-SFTW SMT Full-color TOP LED Waterclear, –, Rot & Grün & Blau | Simulation– | Downloads26 Dateien Strahldaten
| Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWL-SFTW SMT Full-color TOP LED Waterclear | – | Emittierte FarbeRot & Grün & Blau | – | Spitzen-Wellenlänge (Blau) [typ.]465 nm | Spitzen-Wellenlänge (Grün) [typ.]515 nm | Spitzen-Wellenlänge (Rot) [typ.]635 nm | dominante Wellenlänge (Blau) [typ.]470 nm | dominante Wellenlänge (Grün) [typ.]520 nm | dominante Wellenlänge (Rot) [typ.]625 nm | – | Lichtstärke (Blau) [typ.]230 mcd | Lichtstärke (Grün) [typ.]950 mcd | Lichtstärke (Rot) [typ.]270 mcd | – | Durchlassspannung (Blau) [typ.]3.2 V | Durchlassspannung (Grün) [typ.]3.2 V | Durchlassspannung (Rot) [typ.]2 V | ChiptechnologieAlInGaP + InGaN | Abstrahlwinkel Phi 0° [typ.]120 ° | – | – | – | – | – | – | – | Länge3.5 mm | Breite2.8 mm | Höhe1.9 mm | VerpackungTape and Reel | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | MontageartSMT | – | – | – | Betriebstemperatur -40 °C up to +85 °C | ||
![]() | WCAP-AT1H Aluminium-Elektrolytkondensatoren, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-AT1H Aluminium-Elektrolytkondensatoren | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Kapazität47 µF | Nennspannung25 V (AC) | – | – | – | – | Raster2.5 mm | Länge11 mm | – | – | VerpackungAmmopack | – | – | – | – | – | – | Endurance 5000 | Rippelstrom160 mA | Leckstrom11.75 µA | Verlustfaktor14 % | Durchmesser6.3 mm | – | – | – | – | – | – | – | – | – | ||||
![]() | WCAP-AT1H Aluminium-Elektrolytkondensatoren, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-AT1H Aluminium-Elektrolytkondensatoren | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Kapazität47 µF | Nennspannung35 V (AC) | – | – | – | – | Raster3.5 mm | Länge11.5 mm | – | – | VerpackungAmmopack | – | – | – | – | – | – | Endurance 8000 | Rippelstrom240 mA | Leckstrom16.45 µA | Verlustfaktor12 % | Durchmesser8 mm | – | – | – | – | – | – | – | – | – | ||||
![]() | WCAP-AT1H Aluminium-Elektrolytkondensatoren, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-AT1H Aluminium-Elektrolytkondensatoren | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Kapazität220 µF | Nennspannung25 V (AC) | – | – | – | – | Raster5 mm | Länge16 mm | – | – | VerpackungAmmopack | – | – | – | – | – | – | Endurance 10000 | Rippelstrom580 mA | Leckstrom55 µA | Verlustfaktor14 % | Durchmesser10 mm | – | – | – | – | – | – | – | – | – | ||||
![]() | WCAP-ATLI Aluminium-Elektrolytkondensatoren, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-ATLI Aluminium-Elektrolytkondensatoren | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Kapazität680 µF | Nennspannung35 V (AC) | – | – | – | – | Raster5 mm | Länge20 mm | – | – | VerpackungAmmopack | – | – | – | – | – | – | Endurance 5000 | Rippelstrom2260 mA | Leckstrom238 µA | Verlustfaktor9 % | Durchmesser13 mm | – | – | – | – | – | – | – | – | – | ||||
![]() | WR-USB Standard Connectors, –, – | Simulation– | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWR-USB Standard Connectors | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Isolationswiderstand100 MΩ | – | – | – | – | VerpackungTray | – | Nennstrom5 A | – | – | – | – | – | – | – | – | – | Interface typType A | TypHorizontal | GenderBuchse | Pins9 | MontageartTHR | – | Arbeitsspannung20 V (DC) | – | Betriebstemperatur -20 °C up to +85 °C | |||
![]() | WR-USB Type C Connectors, –, – | Simulation– | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWR-USB Type C Connectors | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Isolationswiderstand1000 MΩ | – | – | – | – | VerpackungTape and Reel | – | Nennstrom5 A | – | – | – | – | – | – | – | – | – | Interface typType C | TypHorizontal | GenderBuchse | Pins24 | MontageartTHR | Leiterplattendicke1.6 mm | Arbeitsspannung48 V (DC) | Pin Länge1.9 mm | Betriebstemperatur -40 °C up to +105 °C | |||
![]() | WR-PHD Stiftleisten - Einreihig, –, – | Simulation– | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWR-PHD Stiftleisten - Einreihig | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Isolationswiderstand1000 MΩ | Raster2.54 mm | Länge5.08 mm | – | – | VerpackungBeutel | – | Nennstrom3 A | – | – | – | – | – | – | – | – | – | – | TypGerade | GenderStiftleiste | Pins2 | MontageartTHT | – | Arbeitsspannung250 V (DC) | – | Betriebstemperatur -40 °C up to +105 °C | |||
![]() | WR-PHD Stiftleisten - Einreihig, –, – | Simulation– | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWR-PHD Stiftleisten - Einreihig | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Isolationswiderstand1000 MΩ | Raster2.54 mm | Länge7.62 mm | – | – | VerpackungBeutel | – | Nennstrom3 A | – | – | – | – | – | – | – | – | – | – | TypGerade | GenderStiftleiste | Pins3 | MontageartTHT | – | Arbeitsspannung250 V (DC) | – | Betriebstemperatur -40 °C up to +105 °C | |||
![]() | WR-PHD Stiftleisten - Einreihig, –, – | Simulation– | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWR-PHD Stiftleisten - Einreihig | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Isolationswiderstand1000 MΩ | Raster2.54 mm | Länge10.16 mm | – | – | VerpackungBeutel | – | Nennstrom3 A | – | – | – | – | – | – | – | – | – | – | TypGerade | GenderStiftleiste | Pins4 | MontageartTHT | – | Arbeitsspannung250 V (DC) | – | Betriebstemperatur -40 °C up to +105 °C | |||
750317576 | Inductor, –, – | Simulation– | Downloads– | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | Produktserie Inductor | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |