IC-Hersteller Onsemi

IC-Hersteller (108)

Onsemi CAV4201TD-GT3 | Demoboard ONSEC-18-030

Details

TopologieAbwärtswandler
Schaltfrequenz1000 kHz

Beschreibung

The CAV4201 is a high efficiency step−down converter optimized to drive high current LEDs. A patented switching control algorithm allows highly efficient and accurate LED current regulation. A single RSET resistor sets the full scale LED string current up to 350 mA from supplies as high as 36 V. The switching architecture of the CAV4201 results in extremely low internal power dissipation allowing the device to be housed in a tiny package without the need for dedicated heat sinking. The device is compatible with switching frequencies of up to 1 MHz, making it ideal for applications requiring small footprint and low value external inductors. Enable, analog dimming and LED shutdown control is provided via a single input pin, CTRL. Additional features include overload current protection and thermal shutdown. The device is available in the low profile 5−lead thin SOT23 package and is ideal for space constrained applications.

Eigenschaften

  • LED Drive Current up to 350 mA
  • Compatible with 12 V and 24 V Standard Systems
  • Handles Transients up to 40 V
  • Single Pin Control and Dimming Function
  • Power Efficiency up to 94%
  • Drives LED Strings of up to 32 V
  • Open and Short LED Protection
  • Parallel Configuration for Higher Output Current
  • CAV Prefix for Automotive and Other Applications requiring Site and Change Control
  • TSOT−23 5−lead Package
  • These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant

Typische Anwendungen

  • 12 V and 24 V Lighting Systems, Automotive and Aircraft Lighting, General Lighting, High Brightness 350 mA LEDs

Weiterführende Informationen

Von Onsemi freigegebene Bauteile

Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
Pins
Anwendung
PCB/Kabel/Panel
Modularity
Wire Section
λDom typ.(nm)
Emittierte Farbe
λPeak typ.(nm)
λPeak B typ.(nm)
λPeak G typ.(nm)
λPeak R typ.(nm)
λDom B typ.(nm)
λDom G typ.(nm)
λDom R typ.(nm)
ΦV typ.(lm)
IV typ.(mcd)
IV B typ.(mcd)
IV G typ.(mcd)
IV R typ.(mcd)
VF typ.(V)
VF B typ.(V)
VF G typ.(V)
VF R typ.(V)
Chiptechnologie
2θ50% typ.(°)
CRI typ.
Bauform
L(µH)
ISAT(A)
RDC(mΩ)
fres(MHz)
Mittelstift Ø(mm)
Plug OD(mm)
Arbeitsspannung(V (AC))
Verpackung
Interface typ
Ausführung
Gender
Montageart
L(mm)
Betriebstemperatur
H(mm)
Betätigungskraft(g)
Elektrische Lebensdauer(Cycles)
Actuator-Farbe
Waschbar
Dampfphasenprozess
Z @ 100 MHz(Ω)
Zmax(Ω)
Testbedingung Zmax
IR(A)
Z @ 1 GHz(Ω)
Typ
MusterVerfügbarkeit & Muster
Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
SPECWR-PHD Stiftleisten - Einreihig, 2, –
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins2 
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Arbeitsspannung250 V (AC)
VerpackungBeutel 
–
–
GenderStiftleiste 
MontageartTHT 
Länge5.08 mm
Betriebstemperatur -40 °C up to +105 °C
–
–
–
–
–
–
–
–
–
Nennstrom3 A
–
TypGerade 
–Verfügbarkeit prüfen
SPECWR-TBL Series 102 - 5.00 mm Horizontal Entry Modular, 2, Kabelschutzprinzip
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins2 
AnwendungKabelschutzprinzip 
PCB/Kabel/PanelPCB 
ModularityJa 
Wire Section 22 to 14 (AWG) 0.75 to 1.5 (mm²)
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Arbeitsspannung250 V (AC)
VerpackungKarton 
–
–
–
MontageartTHT 
Länge10 mm
Betriebstemperatur -40 °C up to +105 °C
Höhe10 mm
–
–
–
–
–
–
–
–
Nennstrom17.5 A
–
TypHorizontal 
–Verfügbarkeit prüfen
SPECWR-PHD Stiftleisten - Einreihig, 3, –
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins3 
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Arbeitsspannung250 V (AC)
VerpackungBeutel 
–
–
GenderStiftleiste 
MontageartTHT 
Länge7.62 mm
Betriebstemperatur -40 °C up to +105 °C
–
–
–
–
–
–
–
–
–
Nennstrom3 A
–
TypGerade 
–Verfügbarkeit prüfen
SPECWR-PHD Stiftleisten - Einreihig, 4, –
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins4 
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Arbeitsspannung250 V (AC)
VerpackungBeutel 
–
–
GenderStiftleiste 
MontageartTHT 
Länge10.16 mm
Betriebstemperatur -40 °C up to +105 °C
–
–
–
–
–
–
–
–
–
Nennstrom3 A
–
TypGerade 
–Verfügbarkeit prüfen
SPECWR-USB Mini/Micro Steckverbinder, 5, Mini USB 2.0
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins5 
AnwendungMini USB 2.0 
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Arbeitsspannung30 V (AC)
VerpackungTape and Reel & Mylar 
Interface typType B 
AusführungMit Pads & Pegs 
GenderBuchse 
MontageartSMT 
–
Betriebstemperatur -40 °C up to +105 °C
–
–
–
–
–
–
–
–
–
Nennstrom1 A
–
TypHorizontal 
–Verfügbarkeit prüfen
SPECWE-MPSB EMI Multilayer Power Suppression Bead, –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Bauform0805 
–
–
–
–
–
–
–
–
–
–
–
MontageartSMT 
Länge2 mm
Betriebstemperatur -55 °C up to +125 °C
Höhe0.9 mm
–
–
–
–
–
Impedanz @ 100 MHz320 Ω
Maximale Impedanz347 Ω
Maximale Impedanz170 MHz 
Nennstrom2.5 A
Impedanz @ 1 GHz108 Ω
TypHochstrom 
–Verfügbarkeit prüfen
SPECWE-LQS SMT-Speicherdrossel, –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Bauform2512 
Induktivität22 µH
Sättigungsstrom0.55 A
Gleichstromwiderstand910 mΩ
Eigenresonanzfrequenz22 MHz
–
–
–
–
–
–
–
MontageartSMT 
Länge2.5 mm
Betriebstemperatur -40 °C up to +125 °C
Höhe1.2 mm
–
–
–
–
–
–
–
–
Nennstrom0.45 A
–
–
–Verfügbarkeit prüfen
SPECWE-LQS SMT-Speicherdrossel, –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Bauform5020 
Induktivität4.7 µH
Sättigungsstrom2.7 A
Gleichstromwiderstand55.9 mΩ
Eigenresonanzfrequenz57 MHz
–
–
–
–
–
–
–
MontageartSMT 
Länge5 mm
Betriebstemperatur -40 °C up to +125 °C
Höhe2 mm
–
–
–
–
–
–
–
–
Nennstrom2.3 A
–
–
–Verfügbarkeit prüfen
SPECWE-LQS SMT-Speicherdrossel, –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Bauform5020 
Induktivität22 µH
Sättigungsstrom1.35 A
Gleichstromwiderstand225 mΩ
Eigenresonanzfrequenz22 MHz
–
–
–
–
–
–
–
MontageartSMT 
Länge5 mm
Betriebstemperatur -40 °C up to +125 °C
Höhe2 mm
–
–
–
–
–
–
–
–
Nennstrom1.15 A
–
–
–Verfügbarkeit prüfen
SPECWL-SMCW SMT Mono-color Chip LED Waterclear, –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
dominante Wellenlänge [typ.]625 nm
Emittierte FarbeRot 
Spitzen-Wellenlänge [typ.]630 nm
–
–
–
–
–
–
–
Lichtstärke [typ.]250 mcd
–
–
–
Durchlassspannung [typ.]2 V
–
–
–
ChiptechnologieAlInGaP 
Abstrahlwinkel Phi 0° [typ.]140 °
–
Bauform0603 
–
–
–
–
–
–
–
VerpackungTape and Reel 
–
–
–
MontageartSMT 
Länge1.6 mm
Betriebstemperatur -40 °C up to +85 °C
Höhe0.7 mm
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWL-SMCW SMT Mono-color Chip LED Waterclear, –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
dominante Wellenlänge [typ.]590 nm
Emittierte FarbeGelb 
Spitzen-Wellenlänge [typ.]595 nm
–
–
–
–
–
–
–
Lichtstärke [typ.]120 mcd
–
–
–
Durchlassspannung [typ.]2 V
–
–
–
ChiptechnologieAlInGaP 
Abstrahlwinkel Phi 0° [typ.]140 °
–
Bauform0603 
–
–
–
–
–
–
–
VerpackungTape and Reel 
–
–
–
MontageartSMT 
Länge1.6 mm
Betriebstemperatur -40 °C up to +85 °C
Höhe0.7 mm
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWL-SMCW SMT Mono-color Chip LED Waterclear, –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
dominante Wellenlänge [typ.]525 nm
Emittierte FarbeGrün 
Spitzen-Wellenlänge [typ.]515 nm
–
–
–
–
–
–
–
Lichtstärke [typ.]430 mcd
–
–
–
Durchlassspannung [typ.]3.2 V
–
–
–
ChiptechnologieInGaN 
Abstrahlwinkel Phi 0° [typ.]140 °
–
Bauform0603 
–
–
–
–
–
–
–
VerpackungTape and Reel 
–
–
–
MontageartSMT 
Länge1.6 mm
Betriebstemperatur -40 °C up to +85 °C
Höhe0.7 mm
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWL-SMCW SMT Mono-color Chip LED Waterclear, –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
dominante Wellenlänge [typ.]470 nm
Emittierte FarbeBlau 
Spitzen-Wellenlänge [typ.]465 nm
–
–
–
–
–
–
–
Lichtstärke [typ.]145 mcd
–
–
–
Durchlassspannung [typ.]3.2 V
–
–
–
ChiptechnologieInGaN 
Abstrahlwinkel Phi 0° [typ.]140 °
–
Bauform0603 
–
–
–
–
–
–
–
VerpackungTape and Reel 
–
–
–
MontageartSMT 
Länge1.6 mm
Betriebstemperatur -40 °C up to +85 °C
Höhe0.7 mm
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWL-SWTC SMT White Top view Ceramic LED, –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
Emittierte FarbeMoonlight 
–
–
–
–
–
–
–
Lichtstrom [typ.]121 lm
–
–
–
–
Durchlassspannung [typ.]3.2 V
–
–
–
ChiptechnologieInGaN 
Abstrahlwinkel Phi 0° [typ.]120 °
Farbwiedergabeindex [typ.]75 
Bauform3535 
–
–
–
–
–
–
–
VerpackungTape and Reel 
–
–
–
MontageartSMT 
Länge3.45 mm
Betriebstemperatur -40 °C up to +125 °C
Höhe0.71 mm
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWR-DC Power Jacks, –, –
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
ProduktserieWR-DC Power Jacks
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Mittelstift Ø2 mm
Recommended Plug outer Ø5.5 mm
Arbeitsspannung30 V (AC)
VerpackungBeutel 
–
–
–
MontageartTHT 
–
Betriebstemperatur -40 °C up to +85 °C
–
–
–
–
–
–
–
–
–
Nennstrom5 A
–
TypAbgewinkelt 
–Verfügbarkeit prüfen
SPECWS-TASV J-Bend SMT Tact Switch 3.5x2.9 mm, –, –
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
VerpackungTape and Reel 
–
–
–
–
–
Betriebstemperatur -40 °C up to +85 °C
Höhe1.7 mm
Betätigungskraft350 g
Elektrische Lebensdauer200000 Cycles
Actuator farbeBlau 
WaschbarNein 
Dampfphasenprozessnicht spezifiziert 
–
–
–
Nennstrom0.05 A
–
–
–Verfügbarkeit prüfen
SPECWL-SFTW SMT Full-color TOP LED Waterclear, –, –
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
Emittierte FarbeRot & Grün & Blau 
–
Spitzen-Wellenlänge (Blau) [typ.]465 nm
Spitzen-Wellenlänge (Grün) [typ.]515 nm
Spitzen-Wellenlänge (Rot) [typ.]635 nm
dominante Wellenlänge (Blau) [typ.]470 nm
dominante Wellenlänge (Grün) [typ.]520 nm
dominante Wellenlänge (Rot) [typ.]625 nm
–
–
Lichtstärke (Blau) [typ.]400 mcd
Lichtstärke (Grün) [typ.]1700 mcd
Lichtstärke (Rot) [typ.]750 mcd
–
Durchlassspannung (Blau) [typ.]3.2 V
Durchlassspannung (Grün) [typ.]3.2 V
Durchlassspannung (Rot) [typ.]2 V
ChiptechnologieAlInGaP + InGaN 
Abstrahlwinkel Phi 0° [typ.]120 °
–
Bauform3528 
–
–
–
–
–
–
–
VerpackungTape and Reel 
–
–
–
MontageartSMT 
–
Betriebstemperatur -40 °C up to +85 °C
–
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen