IC-Hersteller Monolithic Power Systems

IC-Hersteller (108)

Monolithic Power Systems MP1604 | Demoboard EVL1604-TL-00A

5.5V, 4A, Synchronous, Step-Down Converter in SOT583 Package Evaluation Board

Details

TopologieAbwärtswandler
Eingangsspannung2.4-5.5 V
Ausgang 11.2 V / 4 A
IC-Revision1.0

Beschreibung

The EVL1604-TL-00A evaluation board is designed to demonstrate the capabilities of the MP1604, a monolithic, step-down switch-mode converter with built-in, internal power MOSFETs. The MP1604 can achieve up to 4A of continuous output current (IOUT) across a 2.4V to 5.5V input voltage (VIN) range, with excellent load and line regulation. The output voltage (VOUT) can be regulated to as low as 0.4V.Constant-on-time (COT) control provides fast transient response, easy loop design, and tight output regulation. Full protection features include over-current protection (OCP), current limiting with hiccup mode, and thermal shutdown.The MP1604 requires a minimal number of readily available, standard external components, and is available in an ultra-small SOT583 package.

Eigenschaften

  • Wide 2.4V to 5.5V Operating Input Voltage (VIN) Range
  • Up to 4A Output Current (IOUT)
  • 16mΩ and 10mΩ Internal Power MOSFET Switches
  • Low Quiescent Current (IQ): 4.5μA Typically
  • 1.25MHz Fixed Switching Frequency (fSW)
  • Enable (EN) Function
  • High Feedback Accuracy:
  • ±0.75% at Junction Temperature (TJ) = 25°C
  • ±1% at TJ = -40°C to +125°C
  • Output Discharge Function
  • Power Good (PG) Indication
  • Adjustable Output Voltage (VOUT) from 0.4V
  • Internal Soft Start
  • Pre-Biased Start-Up
  • Short-Circuit Protection (SCP) with Hiccup Mode
  • Thermal Shutdown
  • Available in an SOT583 Package

Typische Anwendungen

  • Notebooks and PCs
  • Multi-Function Printers
  • Battery-Powered Device

Weiterführende Informationen

Von Monolithic Power Systems freigegebene Bauteile

Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
C
Tol. C
VR(V (DC))
Bauform
Betriebstemperatur
Q
RISO
Keramiktyp
L(mm)
B(mm)
H(mm)
Fl(mm)
Verpackung
MusterVerfügbarkeit & Muster
Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
SPECWCAP-CSGP MLCCs 25 V(DC), 10 pF, ±5%
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität10 pF
Kapazität±5% 
Nennspannung25 V (DC)
Bauform0402 
Betriebstemperatur -55 °C up to +125 °C
Güte600 
Isolationswiderstand10 GΩ
KeramiktypNP0 Klasse I 
Länge1 mm
Breite0.5 mm
Höhe0.5 mm
Pad Dimension0.25 mm
Verpackung7" Tape & Reel 
Verfügbarkeit prüfen

Zusätzlich von Würth Elektronik empfohlene Bauteile

Empfohlene Bauteile sind Alternativen von Würth Elektronik, die nicht offiziell vom IC-Hersteller für dieses Referenzdesign freigegeben sind. Bitte prüfen Sie, ob sie für Ihre Anwendung geeignet sind, und wenden Sie sich an uns, wenn Sie Fragen haben.

Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
L(µH)
IRP,40K(A)
ISAT,30%(A)
RDC typ.(mΩ)
fres(MHz)
VOP(V)
MusterVerfügbarkeit & Muster
Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
SPECWE-MXGI SMT-Speicherdrossel, 0.65 µH, 15.2 A

Anstehende PCN

Aufgrund einer anstehenden PCN wird sich in Kürze das Datenblatt des ausgewählten Produktes ändern. Anbei finden Sie das neue Datenblatt, sowie das noch gültige Datenblatt. Bei weiteren Fragen wenden Sie sich bitte an Ihren Vertriebsmitarbeiter.

Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität0.65 µH
Performance Nennstrom15.2 A
Sättigungsstrom @ 30%12.6 A
Gleichstromwiderstand4.8 mΩ
Eigenresonanzfrequenz80 MHz
Betriebsspannung80 V
Verfügbarkeit prüfen