IC-Hersteller Microchip

IC-Hersteller (103)

Microchip MCP1664

High-Voltage Step-Up LED Driver with UVLO and Open Load Protection

Details

TopologieAufwärtswandler
Eingangsspannung2.4-3 V
Schaltfrequenz425-575 kHz
Ausgang 132 V
IC-RevisionA

Beschreibung

The MCP1664 is a compact, space-efficient,fixed-frequency, non-synchronous step-up converteroptimized to drive multiple strings of LEDs withconstant current powered from two and three-cellalkaline or NiMH/NiCd as well as from one-cell Li-Ion orLi-Polymer batteries.The device integrates a 36V, 400 m low-side switch,which is protected by the 1.8A cycle-by-cycle inductorpeak current limit operation. The MCP1664 starts upwithout high inrush current or output overshoot. Allcompensation and protection circuitry is integrated tominimize the number of external components.The internal feedback (VFB) voltage is set to 300 mV forlow power dissipation when sensing and regulating theLED current. A single resistor sets the LED current.The device features an UVLO which avoids start-upwith low inputs or discharged batteries for twocell-powered applications.The MCP1664 features an open load protection (OLP)which turns off the operation in situations when theLED string is accidentally disconnected or the feedbackpin is short-circuited to GND.While in Shutdown mode (EN = GND), the device stopsswitching, and consumes 40 nA typical of input current.

Eigenschaften

  • 36V, 400m Integrated Switch
  • Up to 92% Efficiency
  • Drive LED Strings in Constant Current
  • 1.8A Peak Input Current Limit:
  • ILED up to 200 mA at 3.3V VIN, 4 White LEDs
  • ILED up to 300 mA at 5.0V VIN, 4 White LEDs
  • ILED up to 150 mA at 4.2V VIN, 8 White LEDs
  • Input Voltage Range: 2.4V to 5.5V
  • Undervoltage Lockout (UVLO):
  • UVLOatVIN Rising: 2.3V, typical
  • UVLOatVIN Falling: 1.85V, typical
  • Shutdown Current (EN = GND): 40 nA Typical
  • PWM Operation: 500 kHz Switching Frequency
  • Cycle-by-Cycle Current Limiting
  • Internal Compensation
  • Open Load Protection (OLP) in the event of:
  • Feedback Pin Shorted to GND (PreventExcessive Current into LEDs)
  • Disconnected LED String (PreventOvervoltage to the Converter’s Output andSW Pin)
  • Overtemperature Protection
  • Available Packages:
  • 5-Lead SOT-23
  • 8-Lead 2x3 TDFN

Typische Anwendungen

  • Camera Flash
  • GPS Navigation Systems
  • Medical Equipment
  • LED Flashlights and Backlight Current Source
  • Portable Devices:
  • Li-Ion Battery LED Lightning Application
  • Hand-Held Gaming Devices
  • Two and Three-Cell Alkaline or NiMH/NiCd White LED Driver for Backlighting Products
  • Portable DVD Players
  • LCD Monitors

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
L(µH)
IR(A)
ISAT(A)
RDC(mΩ)
fres(MHz)
IRP,40K(A)
ISAT,30%(A)
RDC typ.(mΩ)
VOP(V)
Montageart
RDC max.(mΩ)
Version
Bauform
Muster
WE-LQS SMT-Speicherdrossel, 4.7 µH, 1.7 A
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität4.7 µH
Nennstrom1.7 A
Sättigungsstrom2.2 A
Gleichstromwiderstand70 mΩ
Eigenresonanzfrequenz48 MHz
Betriebsspannung120 V
MontageartSMT 
Bauform4018 
WE-TPC SMT-Speicherdrossel, 4.7 µH, 2.4 A
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität4.7 µH
Nennstrom2.4 A
Sättigungsstrom1.95 A
Eigenresonanzfrequenz40 MHz
Gleichstromwiderstand30 mΩ
MontageartSMT 
Gleichstromwiderstand38 mΩ
VersionSMT 
Bauform5828 
WE-MAPI SMT-Speicherdrossel, 4.7 µH, 1.5 A
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität4.7 µH
Nennstrom1.5 A
Sättigungsstrom2.8 A
Eigenresonanzfrequenz30 MHz
Performance Nennstrom2.4 A
Sättigungsstrom @ 30%3.7 A
Gleichstromwiderstand141 mΩ
Betriebsspannung80 V
MontageartSMT 
Gleichstromwiderstand162 mΩ
VersionSMT 
Bauform3015 
WE-SPC SMT-Speicherdrossel, 10 µH, 1.65 A
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität10 µH
Nennstrom1.65 A
Sättigungsstrom2.1 A
Eigenresonanzfrequenz28 MHz
Gleichstromwiderstand82 mΩ
MontageartSMT 
Gleichstromwiderstand94 mΩ
VersionSMT 
Bauform4838 
WE-PD SMT-Speicherdrossel, 10 µH, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität10 µH
Sättigungsstrom1.8 A
Eigenresonanzfrequenz35 MHz
Performance Nennstrom2.45 A
Sättigungsstrom @ 30%2.4 A
Gleichstromwiderstand74 mΩ
Betriebsspannung120 V
MontageartSMT 
Gleichstromwiderstand88 mΩ
VersionRobust 
Bauform6050