IC-Hersteller Analog Devices

IC-Hersteller (103)

Analog Devices LTC7818 | Demoboard DC2855A

40V, Low IQ, 3MHz, Triple Output Buck/Buck/Boost Synchronous Controller

Details

TopologieAbwärtswandler
Eingangsspannung4.5-36 V
Schaltfrequenz100-3000 kHz
Ausgang 15 V / 10 A
Ausgang 210 V / 10 A
Ausgang 33.3 V / 10 A

Beschreibung

The LTC7818 is a high performance triple output (buck/buck/boost) synchronous DC/DC switching regulator controller that drives all N-channel power MOSFET stages. Its constant frequency current mode architecture allows a phase-lockable switching frequency of up to 3MHz. The LTC7818 operates from a wide 4.5V to 40V input supply range. When biased from the output of the boost converter or another auxiliary supply, the LTC7818 can operate from an input supply as low as 1V after start-up.The very low no-load quiescent current extends operating run time in battery powered systems. OPTI-LOOP® compensation allows the transient response to be optimized over a wide range of output capacitance and ESR values. The LTC7818 features a precision 0.8V reference for the bucks, 1.2V reference for the boost and a power good output indicator.The LTC7818 additionally features spread spectrum operation which significantly reduces the peak radiated and conducted noise on both the input and output supplies, making it easier to comply with electromagnetic interference (EMI) standards.

Eigenschaften

  • Dual Buck Plus Single Boost Synchronous Controllers
  • Low Operating IQ: 14μA (14V to 3.3V, Channel 1 On)
  • Outputs Remain in Regulation Through Cold Crank Down to 1V Input Supply Voltage
  • Wide Bias Input Voltage Range: 4.5V to 40V
  • Buck and Boost Output Voltages up to 40V
  • Spread Spectrum Operation
  • RSENSE or DCR Current Sensing
  • 100% Duty Cycle for Boost Synchronous MOSFET
  • Programmable Fixed Frequency (100kHz to 3MHz)
  • Phase-Lockable Frequency (100kHz to 3MHz)
  • Selectable Continuous, Pulse-Skipping, or Low Ripple Burst Mode Operation at Light Loads
  • Boost Channel Current Monitor Output
  • Low Shutdown IQ: 1.5μA
  • Small 40-Lead 6mm × 6mm QFN Package

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
f(mm)
Z @ 100 MHz(Ω)
Zmax(Ω)
Testbedingung Zmax
IR(mA)
Z @ 1 GHz(Ω)
H(mm)
Typ
Pins
Montageart
L(mm)
Arbeitsspannung(V (AC))
Betriebstemperatur
Muster
WE-MPSB EMI Multilayer Power Suppression Bead, –, 100 Ω
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Impedanz @ 100 MHz100 Ω
Maximale Impedanz160 Ω
Maximale Impedanz1100 MHz 
Nennstrom8000 mA
Impedanz @ 1 GHz150 Ω
Höhe2.3 mm
TypHochstrom 
MontageartSMT 
Länge4.5 mm
Betriebstemperatur -55 °C up to +125 °C
WA-SNSR Self-Retaining Spacer, 4.8 mm, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bohrung in Blende4.8 mm
Länge12.7 mm
Betriebstemperatur -30 °C up to +85 °C
WR-PHD Kurzschlussbrücken, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom3000 mA
Pins
Arbeitsspannung200 V (AC)
Betriebstemperatur -25 °C up to +105 °C
WR-PHD Stiftleisten, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom2000 mA
TypGerade 
Pins
MontageartTHT 
Länge6 mm
Arbeitsspannung200 V (AC)
Betriebstemperatur -40 °C up to +105 °C
WR-PHD Stiftleisten, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom2000 mA
TypGerade 
Pins
MontageartTHT 
Länge6 mm
Arbeitsspannung200 V (AC)
Betriebstemperatur -40 °C up to +105 °C