| Topologie | Abwärtswandler |
| Eingangsspannung | 4.5-60 V |
| Ausgang 1 | 0.4 V |
| Ausgang 2 | 0.3 V |
| Ausgang 3 | 0.4 V |
| Ausgang 4 | 0.3 V |
The DC2875A is a demonstration system for the LTC2971 Power System Manager that interfaces to various regulators. The board contains all the circuitry needed to demonstrate a power system that utilizes two 2-channel LTC2971 devices that manage four power supplies. The four power supplies include various switching regulators for the purpose of demonstrating a variety of methods to sense voltage and current. The demo board provides a sophisticated 4-channel digitally programmable power supply system.The LTC2971 is a 2-channel I2C/SMBus/PMBus Power System Manager that features accurate input current and energy measurement and is capable of managing ±60V supplies. The device monitors input current and input voltage, and calculates input power and energy. The DC2875A demonstrates the ability of the LTC2971 to sequence, trim, margin, supervise, monitor, and log faults for four power supplies. The LTC2971 monitors each channel’s output voltage and output current and also monitors each channel’s external temperature sensor and its own internal die temperature.The DC2875A board contains four independent power supply rails. All four rails are based on DC/DC switching regulators. The +36V and +32V channels are managed by an LTC2971 and the ±24V channels are managed by an LTC2971-1. The board is pre-configured with these voltages and may be re-configured with feedback resistors.
Artikel Nr. | Datenblatt | Simulation | Downloads | Status | Produktserie | λDom typ.(nm) | Emittierte Farbe | λPeak typ.(nm) | IV typ.(mcd) | VF typ.(V) | Chiptechnologie | 2θ50% typ.(°) | C | Tol. C | VR(V (DC)) | Bauform | DF(%) | RISO | Keramiktyp | B(mm) | Fl(mm) | Verpackung | L(µH) | IRP,40K(A) | ISAT,30%(A) | RDC typ.(mΩ) | VOP(V) | ISAT(A) | RDC max.(mΩ) | Version | ISAT,10%(A) | L1(µH) | L2(µH) | IR 1(A) | IR 2(A) | ISAT 1(A) | RDC1 typ(Ω) | RDC2 typ(Ω) | RDC1 max(Ω) | RDC2 max(Ω) | fres(MHz) | Typ | Pins | Montageart | L(mm) | H(mm) | IR(A) | Arbeitsspannung(V (AC)) | Betriebstemperatur | Muster | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | WL-SMCW SMT Mono-color Chip LED Waterclear, 470 nm, Blau | Downloads28 Dateien Strahldaten
| Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWL-SMCW SMT Mono-color Chip LED Waterclear | dominante Wellenlänge [typ.]470 nm | Emittierte FarbeBlau | Spitzen-Wellenlänge [typ.]465 nm | Lichtstärke [typ.]145 mcd | Durchlassspannung [typ.]3.2 V | ChiptechnologieInGaN | Abstrahlwinkel Phi 0° [typ.]140 ° | – | – | – | Bauform0603 | – | – | – | Breite0.8 mm | – | VerpackungTape and Reel | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | MontageartSMT | Länge1.6 mm | Höhe0.7 mm | – | – | Betriebstemperatur -40 °C up to +85 °C | |||
![]() | WL-SMCW SMT Mono-color Chip LED Waterclear, 525 nm, Grün | Downloads27 Dateien Strahldaten
| Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWL-SMCW SMT Mono-color Chip LED Waterclear | dominante Wellenlänge [typ.]525 nm | Emittierte FarbeGrün | Spitzen-Wellenlänge [typ.]515 nm | Lichtstärke [typ.]430 mcd | Durchlassspannung [typ.]3.2 V | ChiptechnologieInGaN | Abstrahlwinkel Phi 0° [typ.]140 ° | – | – | – | Bauform0603 | – | – | – | Breite0.8 mm | – | VerpackungTape and Reel | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | MontageartSMT | Länge1.6 mm | Höhe0.7 mm | – | – | Betriebstemperatur -40 °C up to +85 °C | |||
![]() | WL-SMCW SMT Mono-color Chip LED Waterclear, 630 nm, Superrot | Downloads27 Dateien Strahldaten
| Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWL-SMCW SMT Mono-color Chip LED Waterclear | dominante Wellenlänge [typ.]630 nm | Emittierte FarbeSuperrot | Spitzen-Wellenlänge [typ.]645 nm | Lichtstärke [typ.]60 mcd | Durchlassspannung [typ.]1.9 V | ChiptechnologieAlInGaP | Abstrahlwinkel Phi 0° [typ.]140 ° | – | – | – | Bauform0603 | – | – | – | Breite0.8 mm | – | VerpackungTape and Reel | – | – | – | – | – | – | – | VersionSMT | – | – | – | – | – | – | – | – | – | – | – | – | – | MontageartSMT | Länge1.6 mm | Höhe0.7 mm | – | – | Betriebstemperatur -40 °C up to +85 °C | |||
![]() | WE-PD SMT-Speicherdrossel, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-PD SMT-Speicherdrossel | – | – | – | – | – | – | – | – | – | – | Bauform7345 | – | – | – | Breite7.3 mm | – | – | Induktivität47 µH | Performance Nennstrom1.8 A | Sättigungsstrom @ 30%1.35 A | Gleichstromwiderstand170 mΩ | Betriebsspannung120 V | Sättigungsstrom1.1 A | Gleichstromwiderstand260 mΩ | VersionGestanzt | Sättigungsstrom 11.1 A | – | – | – | – | – | – | – | – | – | Eigenresonanzfrequenz10.5 MHz | – | Pins2 | MontageartSMT | Länge7.3 mm | Höhe4.5 mm | Nennstrom1.03 A | – | Betriebstemperatur -40 °C up to +125 °C | ||||
![]() | WE-PD SMT-Speicherdrossel, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-PD SMT-Speicherdrossel | – | – | – | – | – | – | – | – | – | – | Bauform6033 | – | – | – | Breite6.2 mm | – | – | Induktivität33 µH | Performance Nennstrom1.05 A | Sättigungsstrom @ 30%1.05 A | Gleichstromwiderstand340 mΩ | Betriebsspannung120 V | Sättigungsstrom0.9 A | Gleichstromwiderstand400 mΩ | VersionRobust | Sättigungsstrom 10.9 A | – | – | – | – | – | – | – | – | – | Eigenresonanzfrequenz17 MHz | – | – | MontageartSMT | Länge5.9 mm | Höhe3.3 mm | – | – | Betriebstemperatur -40 °C up to +125 °C | ||||
![]() | WE-MAPI SMT-Speicherdrossel, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-MAPI SMT-Speicherdrossel | – | – | – | – | – | – | – | – | – | – | Bauform3015 | – | – | – | Breite3 mm | – | – | Induktivität33 µH | Performance Nennstrom0.7 A | Sättigungsstrom @ 30%1.7 A | Gleichstromwiderstand1210 mΩ | Betriebsspannung80 V | Sättigungsstrom1.3 A | Gleichstromwiderstand1330 mΩ | VersionSMT | Sättigungsstrom 10.9 A | – | – | – | – | – | – | – | – | – | Eigenresonanzfrequenz10 MHz | – | Pins2 | MontageartSMT | Länge3 mm | Höhe1.5 mm | Nennstrom0.5 A | – | Betriebstemperatur -40 °C up to +125 °C | ||||
![]() | WE-LHMI SMT Speicherdrossel, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-LHMI SMT Speicherdrossel | – | – | – | – | – | – | – | – | – | – | Bauform1040 | – | – | – | Breite10 mm | – | – | Induktivität33 µH | Performance Nennstrom3.75 A | Sättigungsstrom @ 30%7.4 A | Gleichstromwiderstand92 mΩ | Betriebsspannung120 V | – | Gleichstromwiderstand112 mΩ | VersionSMT | Sättigungsstrom 13.3 A | – | – | – | – | – | – | – | – | – | Eigenresonanzfrequenz6 MHz | – | – | MontageartSMT | Länge11 mm | Höhe3.8 mm | – | – | Betriebstemperatur -40 °C up to +125 °C | ||||
![]() | WE-DD SMT-Doppeldrossel, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-DD SMT-Doppeldrossel | – | – | – | – | – | – | – | – | – | – | Bauform7345 | – | – | – | Breite7.3 mm | – | – | Induktivität100 µH | – | – | – | Betriebsspannung80 V | Sättigungsstrom0.9 A | Gleichstromwiderstand1300 mΩ | – | – | Induktivität 1100 µH | Induktivität 2100 µH | Nennstrom 10.65 A | Nennstrom 20.65 A | Sättigungsstrom [1]0.9 A | Gleichstromwiderstand 11.029 Ω | Gleichstromwiderstand 21.029 Ω | Gleichstromwiderstand 11.3 Ω | Gleichstromwiderstand 21.3 Ω | Eigenresonanzfrequenz4 MHz | TypGerade | – | – | Länge7.3 mm | Höhe4.8 mm | Nennstrom0.65 A | – | Betriebstemperatur -40 °C up to +125 °C | ||||
| WCAP-CSGP MLCCs 10 V(DC), –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 10 V(DC) | – | – | – | – | – | – | – | Kapazität4.7 µF | Kapazität±20% | Nennspannung10 V (DC) | Bauform0603 | Verlustfaktor10 % | Isolationswiderstand0.02 GΩ | KeramiktypX5R Klasse II | Breite0.8 mm | Pad Dimension0.4 mm | Verpackung7" Tape & Reel | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Länge1.6 mm | Höhe0.8 mm | – | – | Betriebstemperatur -55 °C up to +85 °C | |||||
![]() | WR-PHD Kurzschlussbrücken, –, – | Simulation– | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWR-PHD Kurzschlussbrücken | – | – | – | – | – | – | – | – | – | – | – | – | Isolationswiderstand1000 MΩ | – | – | – | VerpackungBeutel | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Pins2 | – | – | – | Nennstrom3 A | Arbeitsspannung200 V (AC) | Betriebstemperatur -25 °C up to +105 °C | |||
![]() | WR-PHD Stiftleisten, –, – | Simulation– | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWR-PHD Stiftleisten | – | – | – | – | – | – | – | – | – | – | – | – | Isolationswiderstand1000 MΩ | – | – | – | VerpackungBeutel | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | TypGerade | Pins3 | MontageartTHT | Länge6 mm | – | Nennstrom2 A | Arbeitsspannung200 V (AC) | Betriebstemperatur -40 °C up to +105 °C |