IC-Hersteller MaxLinear

IC-Hersteller (96)

MaxLinear XR22417 | Demoboard XR22417CV64EVB

Details

TopologieSonstige Topologie
IC-RevisionA

Beschreibung

The XR22417 evaluation board is for the Exar USB 2.0 7-Port hub in both the 64 pin LQFP and 48 pin LQFP packages. Thismanual is intended to guide users to use various functions and configurations of the hub device.The XR22417 is a USB 2.0 7-port hub using Multiple Transaction Translators (MTT) for highest possible bandwidth capability. The upstream USB interface has an integrated USB 2.0 PHY and device controller that is compliant with both hi-speed (480 Mbps) and full-speed (12 Mbps). The downstream PHY supports hi-speed, full-speed and low-speed (1.5 Mbps) on each of the 7 downstream ports. Individual port activity and overall hub activity indicators provide status outputs to control external LEDs for each port. An external EEPROM may be used with the XR22417 to change selected USB descriptors including the USB vendor and product IDs, the number of downstream ports and device serial number. The XR22417 provides different power modes, ganged or individual power control as well as global or individual overcurrent sensing modes. In individual power control each port has an overcurrent input designed to be used with a current sensing device and a power control output that can remove power from the attached device on that port. The XR22417 operates from a single 5V power input. Internal regulators provide a 3.3V output which may be connected to VCC33 power input pins. In turn a second internal regulator provides a 1.8V output from the 3.3V input. This 1.8V output may be connected to VCC18 power input pins

Eigenschaften

»USB 2.0 compliant interface»Multiple transaction translators (MTT)»Regulated +3.3V output power»Inpidual port and hub activity LED indicators»Inpidual power enables»Inpidual overcurrent sensing»Single 5V power supply»Single 12 MHz Crystal

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
MontageartIR 1
(A)
Arbeitsspannung
(V (DC))
CTol. CBauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
Interface typH
(mm)
Betätigungskraft (Value)
(g)
Elektrische Lebensdauer
(Cycles)
Actuator-FarbeDampfphasenprozessZ @ 100 MHz
(Ω)
Zmax
(Ω)
Testbedingung ZmaxIR
(mA)
Z @ 1 GHz
(Ω)
TypWicklungstypL
(µH)
RDC max.
(mΩ)
VR
(V)
VT
(V (AC))
AnwendungPinsReihenGenderVerpackung Muster
150080BS75000SPEC
7 Dateien WL-SMCW SMT Mono-color Chip LED Waterclear 470 Blau 465 145 3.2 InGaN 140 SMT 0805 -40 °C up to +85 °C 2 1.25 0.7 Tape and Reel
150080GS75000SPEC
7 Dateien WL-SMCW SMT Mono-color Chip LED Waterclear 525 Grün 515 450 3.2 InGaN 140 SMT 0805 -40 °C up to +85 °C 2 1.25 0.7 Tape and Reel
150080YS75000SPEC
6 Dateien WL-SMCW SMT Mono-color Chip LED Waterclear 590 Gelb 595 120 2 AlInGaP 140 SMT 0805 -40 °C up to +85 °C 2 1.25 0.7 Tape and Reel
74279221601SPEC
8 Dateien WE-MPSB EMI Multilayer Power Suppression Bead SMT 1206 -55 °C up to +125 °C 3.2 1.6 0.5 1.1 600 610 83 MHz 2500 84 High Current 50
744230900SPEC
8 Dateien WE-CNSW Stromkompensierter SMT Line Filter SMT 0603 -40 °C up to +105 °C 1.6 0.85 1.1 90 550 bifiliar 0.134 145 50 125 USB 2.0 4
885012206065SPEC
8 Dateien WCAP-CSGP MLCCs 25 V(DC)10 nF ±10% 0603 -55 °C up to +125 °C 3.510 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 25 7" Tape & Reel
885012206071SPEC
8 Dateien WCAP-CSGP MLCCs 25 V(DC)100 nF ±10% 0603 -55 °C up to +125 °C 3.55 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 25 7" Tape & Reel
885012207051SPEC
7 Dateien WCAP-CSGP MLCCs 16 V(DC)1 µF ±10% 0805 -55 °C up to +125 °C 50.5 GΩ X7R Klasse II 2 1.25 0.5 1.25 16 7" Tape & Reel
885012107014SPEC
8 Dateien WCAP-CSGP MLCCs 16 V(DC)10 µF ±20% 0805 -55 °C up to +85 °C 100.01 GΩ X5R Klasse II 2 1.25 0.5 1.25 16 7" Tape & Reel
885012109011SPEC
8 Dateien WCAP-CSGP MLCCs 16 V(DC)47 µF ±20% 1210 -55 °C up to +85 °C 100.002 GΩ X5R Klasse II 3.2 2.5 0.75 2.5 16 7" Tape & Reel
694103107102SPEC
6 Dateien WR-DC DC Power Jack Right Angled Low Profile SMT Ø 3.9 with 4 soldering pads & pegs SMT 5 18 -40 °C up to +85 °C100 MΩ 5000 Right Angled Tape and Reel
431481031816SPEC
5 Dateien WS-TASV SMT Tact Switch 6x6 mm with ground terminal -40 °C up to +85 °C100 MΩ 3.1 160 1000000 Schwarz nicht spezifiziert 50 12 Tape and Reel
61300211121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header THT 250 -40 °C up to +105 °C1000 MΩ 5.08 3000 Gerade 2 Single Pin Header Beutel
61300311121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header THT 250 -40 °C up to +105 °C1000 MΩ 7.62 3000 Gerade 3 Single Pin Header Beutel
61300621121SPEC
6 Dateien WR-PHD 2.54 mm THT Dual Pin Header THT 250 -40 °C up to +105 °C1000 MΩ 7.62 3000 Gerade 6 Dual Pin Header Beutel
61400416021SPEC
6 Dateien WR-COM USB 2.0 Type A Horizontal THT 1.5 30 -40 °C up to +105 °C1000 MΩ Type A 1500 Horizontal USB 2.0 4 Receptacle Tray
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
MontageartIR 1
(A)
Arbeitsspannung
(V (DC))
CTol. CBauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
Interface typH
(mm)
Betätigungskraft (Value)
(g)
Elektrische Lebensdauer
(Cycles)
Actuator-FarbeDampfphasenprozessZ @ 100 MHz
(Ω)
Zmax
(Ω)
Testbedingung ZmaxIR
(mA)
Z @ 1 GHz
(Ω)
TypWicklungstypL
(µH)
RDC max.
(mΩ)
VR
(V)
VT
(V (AC))
AnwendungPinsReihenGenderVerpackung Muster