IC manufacturers Xilinx

IC manufacturers (103)

Xilinx XCVU9P-L2FLGA2104E | Demoboard VCU118

VCU118 Evaluation Board

Overview

TopologyFPGA
IC revision1.1

Description

The Virtex® UltraScale+™ FPGA VCU118 Evaluation Kit is the ideal development environment for evaluating the cutting edge Virtex UltraScale+ FPGAs. Virtex UltraScale+ devices provide the highest performance and integration capabilities in a FinFET node, including both the highest serial I/O and signal processing bandwidth, as well as the highest on-chip memory density.This kit is ideal for prototyping applications ranging from 1+ Tb/s networking and data center to fully integrated radar/early-warning systems.

Features

Virtex UltraScale+ XCVU9P-L2FLGA2104 device

  • Zynq®-7000 AP SoC XC7Z010 based system controller
  • Two 2.5 GB DDR4 80-bit component memory interfaces (five [256 Mb x 16] deviceseach)
  • 288 MB 72-bit RLD3 memory interface comprised of two 1.125 Gb 36-bit devices
  • 1 Gb (128 MB) linear x16 BPI flash memory
  • USB JTAG interface using a Digilent module with separate micro-B USB connector
  • Clock sources:° Si5335A quad clock generator° Three Si570 I2C programmable LVDS clock generators° One SG5032 fixed 250 MHz LVDS clock generator° Si5328B clock multiplier and jitter attenuator for QSFP° Subminiature version A (SMA) connectors (differential)
  • 52 GTY transceivers (13 Quads)° FMC+ HSPC connector (twenty-four GTY transceivers)° 2x28 Gb/s QSFP+ connectors (eight GTY transceivers)° Samtec Firefly connector (four GTY transceiver)° PCIe 16-lane edge connector (sixteen GTY transceivers)
  • PCI Express endpoint connectivity° Gen1 16-lane (x16)° Gen2 16-lane (x16)° Gen3 8-lane (x8)
  • Ethernet PHY SGMII interface with RJ-45 connector
  • Dual USB-to-UART bridge with micro-B USB connector
  • I2C bus
  • Status LEDs
  • User I/O (4-pole DIP switch, 6 each push-button switches, 8 x LED)

Products

Order Code
Data­sheet
Replacement Order Code
Simu­lation
Downloads
Status
Product series
L(µH)
IR(mA)
IR 2(mA)
ISAT(mA)
RDC(mΩ)
fres(MHz)
Type
H(mm)
W(mm)
IR(A)
RDC max.(mΩ)
VT(V (RMS))
Material
Version
IRP,40K(A)
ISAT,10%(A)
ISAT,30%(A)
Qty.
Qmin.
LR(µH)
Data rate
PoE
Ports
Tab
Improved CMRR
Operating Temperature
LED
PHY Chip Mode
Mount
Shield Tabs
SamplesAvailability & Sample
SPECWE-HCI SMT Flat Wire High Current Inductor, 0.22 µH, –
Replacement Order Code
Simu­lation
Availability
Status Activei| Production is active. Expected lifetime: >10 years.
Inductance0.22 µH
DC Resistance1.1 mΩ
Self Resonant Frequency290 MHz
Height3.8 mm
Width6.9 mm
DC Resistance1.1 mΩ
MaterialSuperflux 
VersionSMT 
Performance Rated Current36.4 A
Saturation Current @ 10%15 A
Saturation Current @ 30%32 A
Packaging Unit1000 
Rated Inductance0.18 µH
Operating Temperature -40 °C up to +150 °C
MountSMT 
Check availability
SPECWE-HCI SMT Flat Wire High Current Inductor, 0.68 µH, –
Replacement Order Code
Simu­lation
Availability
Status Activei| Production is active. Expected lifetime: >10 years.
Inductance0.68 µH
DC Resistance3.1 mΩ
Self Resonant Frequency105 MHz
Height3.8 mm
Width6.9 mm
DC Resistance3.41 mΩ
MaterialSuperflux 
VersionSMT 
Performance Rated Current20.9 A
Saturation Current @ 10%9.5 A
Saturation Current @ 30%20 A
Packaging Unit1000 
Rated Inductance0.52 µH
Operating Temperature -40 °C up to +150 °C
MountSMT 
Check availability
SPECWE-HCC SMT High Current Cube Inductor, 0.68 µH, –
Replacement Order Code
Simu­lation
Availability
Status Activei| Production is active. Expected lifetime: >10 years.
Inductance0.68 µH
Self Resonant Frequency108 MHz
Height9.5 mm
Width11.4 mm
Rated Current26 A
DC Resistance1.85 mΩ
MaterialFerrite 
VersionSMT 
Performance Rated Current40.2 A
Saturation Current @ 10%35.8 A
Saturation Current @ 30%39.1 A
Packaging Unit300 
Rated Inductance0.66 µH
Operating Temperature -40 °C up to +125 °C
MountSMT 
Check availability
SPECWE-PMI Power Multilayer Inductor, 1 µH, 1450 mA
Replacement Order Code 74479787210A
74479887210A
Simu­lation
Availability
Downloads
Status PTNi| Production will be discontinued. Expected lifetime: <2 years.
Inductance1 µH
Rated Current1450 mA
Rated Current 21950 mA
Saturation Current1150 mA
DC Resistance60 mΩ
Self Resonant Frequency75 MHz
TypeLow RDC 
Height0.8 mm
Width2 mm
DC Resistance75 mΩ
VersionSMT 
Packaging Unit3000 
Q-Factor [1]23 
Operating Temperature -40 °C up to +125 °C
MountSMT 
SPECWE-HCI SMT Flat Wire High Current Inductor, 1 µH, –
Replacement Order Code
Simu­lation
Availability
Status Activei| Production is active. Expected lifetime: >10 years.
Inductance1 µH
DC Resistance4.6 mΩ
Self Resonant Frequency85 MHz
Height3.8 mm
Width6.9 mm
DC Resistance4.6 mΩ
MaterialSuperflux 
VersionSMT 
Performance Rated Current16.8 A
Saturation Current @ 10%8 A
Saturation Current @ 30%19 A
Packaging Unit1000 
Rated Inductance0.78 µH
Operating Temperature -40 °C up to +150 °C
MountSMT 
Check availability
SPECWE-TPC SMT Tiny Power Inductor, 1.2 µH, –
Replacement Order Code
Simu­lation
Availability
Status Activei| Production is active. Expected lifetime: >10 years.
Inductance1.2 µH
Saturation Current3000 mA
Self Resonant Frequency180 MHz
Height2.8 mm
Width2.8 mm
Rated Current2.6 A
DC Resistance42 mΩ
VersionSMT 
Packaging Unit550 
Operating Temperature -40 °C up to +125 °C
MountSMT 
Check availability
SPECWE-SPC SMT Power Inductor, 3.3 µH, –
Replacement Order Code
Simu­lation
Availability
Status Activei| Production is active. Expected lifetime: >10 years.
Inductance3.3 µH
Saturation Current3600 mA
Self Resonant Frequency64 MHz
Height3.8 mm
Width4.8 mm
Rated Current2.6 A
DC Resistance36 mΩ
VersionSMT 
Packaging Unit500 
Operating Temperature -40 °C up to +125 °C
MountSMT 
Check availability
SPECWE-PMI Power Multilayer Inductor, 10 µH, 600 mA
Replacement Order Code
Simu­lation
Availability
Status Activei| Production is active. Expected lifetime: >10 years.
Inductance10 µH
Rated Current600 mA
Rated Current 2850 mA
Saturation Current125 mA
DC Resistance300 mΩ
Self Resonant Frequency20 MHz
TypeHigh Saturation Current 
Height0.8 mm
Width2 mm
DC Resistance390 mΩ
VersionSMT 
Packaging Unit3000 
Q-Factor [1]27 
Operating Temperature -40 °C up to +125 °C
MountSMT 
Check availability
SPECWE-RJ45 LAN Transformer, 350 µH, –
Replacement Order Code
Simu­lation
Availability
Status Activei| Production is active. Expected lifetime: >10 years.
Inductance350 µH
Height13.9 mm
Width16.79 mm
Insulation Test Voltage1500 V (RMS)
VersionTHT 
Packaging Unit28 
Data rate1000BASE-T 
PoEnon-PoE 
Ports
Tab PositionUp 
Improved Common Mode RejectionNo 
Operating Temperature 0 °C up to +70 °C
LED (Left-Right)green-green 
PHY Chip Modecurrent & voltage 
MountTHT 
Shield TabsYes 
Check availability