| Topology | Flyback Converter |
| Input voltage | 90-264 V |
| Output 1 | 20 V |
| IC revision | 1.0 |
The EVLVIPGAN100WP is a 100 W USB Type-C® power delivery 3.0 adapter reference design. It is an isolated power supply with a standalone USB PD controller. The evaluation board implements, at the primary side, a quasi-resonant flyback converter based on STMicroelectronics' VIPerGaN® high-voltage converter VIPERGAN100W with optocoupler feedback for voltage regulation. This controller combines a high performance low-voltage PWM controller chip with a 650 V startup cell in the same package. The advanced power management with the low quiescent helps to achieve low standby consumptions.To reduce the input mains current distortion, thus providing IDE range mains operation with an extremely low THD, a PFC based on the L6564 is used.At the secondary side, to increase the system efficiency, the rectification is based on the SRK1001 adaptive synchronous rectification controller.Always on the secondary side the CC/CV regulation loop to drive the power regulation stage and the USB Type-C® PD interface is based on the STUSB4761 controller. This controller offers the benefits of a full hardware USB PD stack allowing robust, deterministic, and safe negotiation in line with USB PD standards.The evaluation board implements a robust adapter protected for output overvoltage, output undervoltage, output overpower, and output short-circuit. This reference design helps designers to develop adapters with a short bill of materials in order to obtain a cost-effective and fast design.
Input voltage range: Universal AC from 90 to 264 VAC with 47 Hz to 63 Hz frequencyMaximum output power: 100 WOutput voltage: Single Type-C output 5 VDC÷20 VDCFive fixed PDOs: 5 V@3 A, 9 V@3 A, 12 V@3 A, 15 V@3 A, 20 V@5 APeak efficiency> 92%Power density (unboxed): > 24 W/in3Support for USB Power Delivery protocol
Order Code | Datasheet | Simulation | Downloads | Status | Product series | C | Tol. C | VR(V (DC)) | Size | Qmin. | DF(%) | RISO | Ceramic Type | L(mm) | W(mm) | H(mm) | Fl(mm) | Packaging | Operating Temperature | Q(%) | Endurance(h) | IRIPPLE(mA) | ILeak(µA) | Pitch(mm) | Ø D(mm) | VRMS(V) | VDC(V) | VBR(V) | IPeak(A) | Wmax(J) | PDiss(W) | VDE Approval | L(µH) | IR(A) | RDC max.(Ω) | Samples | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| WCAP-CSGP MLCCs 100 V(DC), 100 pF, ±5% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 100 V(DC) | Capacitance100 pF | Capacitance±5% | Rated Voltage100 V (DC) | Size0603 | Q-Factor [1]1000 | – | Insulation Resistance10 GΩ | Ceramic TypeNP0 Class I | Length1.6 mm | Width0.8 mm | Height0.8 mm | Pad Dimension0.4 mm | Packaging7" Tape & Reel | Operating Temperature -55 °C up to +125 °C | Q-Factor1000 % | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 50 V(DC), 220 pF, ±5% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 50 V(DC) | Capacitance220 pF | Capacitance±5% | Rated Voltage50 V (DC) | Size0603 | – | – | Insulation Resistance10 GΩ | Ceramic TypeNP0 Class I | Length1.6 mm | Width0.8 mm | Height0.8 mm | Pad Dimension0.4 mm | Packaging7" Tape & Reel | Operating Temperature -55 °C up to +125 °C | Q-Factor1000 % | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||||
![]() | WCAP-CSMH Mid and High Voltage, 470 pF, ±10% | Downloads8 files | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSMH Mid and High Voltage | Capacitance470 pF | Capacitance±10% | Rated Voltage1000 V (DC) | Size1206 | – | Dissipation Factor2.5 % | Insulation Resistance10 GΩ | Ceramic TypeX7R Class II | Length3.2 mm | Width1.6 mm | Height1.25 mm | Pad Dimension0.6 mm | Packaging7" Tape & Reel | Operating Temperature -55 °C up to +125 °C | Q-Factor600 % | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
![]() | WCAP-CSMH Mid and High Voltage, 4.7 nF, ±10% | Downloads8 files | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSMH Mid and High Voltage | Capacitance4.7 nF | Capacitance±10% | Rated Voltage500 V (DC) | Size1206 | – | Dissipation Factor2.5 % | Insulation Resistance10 GΩ | Ceramic TypeX7R Class II | Length3.2 mm | Width1.6 mm | Height1.25 mm | Pad Dimension0.6 mm | Packaging7" Tape & Reel | Operating Temperature -55 °C up to +125 °C | Q-Factor600 % | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
| WCAP-CSGP MLCCs 100 V(DC), 10 nF, ±10% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 100 V(DC) | Capacitance10 nF | Capacitance±10% | Rated Voltage100 V (DC) | Size0603 | Q-Factor [1]600 | Dissipation Factor2.5 % | Insulation Resistance10 GΩ | Ceramic TypeX7R Class II | Length1.6 mm | Width0.8 mm | Height0.8 mm | Pad Dimension0.4 mm | Packaging7" Tape & Reel | Operating Temperature -55 °C up to +125 °C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 50 V(DC), 33 nF, ±10% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 50 V(DC) | Capacitance33 nF | Capacitance±10% | Rated Voltage50 V (DC) | Size0603 | Q-Factor [1]600 | Dissipation Factor2.5 % | Insulation Resistance10 GΩ | Ceramic TypeX7R Class II | Length1.6 mm | Width0.8 mm | Height0.8 mm | Pad Dimension0.4 mm | Packaging7" Tape & Reel | Operating Temperature -55 °C up to +125 °C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 50 V(DC), 100 nF, ±10% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 50 V(DC) | Capacitance100 nF | Capacitance±10% | Rated Voltage50 V (DC) | Size0603 | Q-Factor [1]600 | Dissipation Factor3 % | Insulation Resistance5 GΩ | Ceramic TypeX7R Class II | Length1.6 mm | Width0.8 mm | Height0.8 mm | Pad Dimension0.4 mm | Packaging7" Tape & Reel | Operating Temperature -55 °C up to +125 °C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 50 V(DC), 1 µF, ±10% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 50 V(DC) | Capacitance1 µF | Capacitance±10% | Rated Voltage50 V (DC) | Size0805 | Q-Factor [1]600 | Dissipation Factor10 % | Insulation Resistance0.1 GΩ | Ceramic TypeX7R Class II | Length2 mm | Width1.25 mm | Height1.25 mm | Pad Dimension0.5 mm | Packaging7" Tape & Reel | Operating Temperature -55 °C up to +125 °C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 50 V(DC), 4.7 µF, ±10% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 50 V(DC) | Capacitance4.7 µF | Capacitance±10% | Rated Voltage50 V (DC) | Size1206 | Q-Factor [1]600 | Dissipation Factor10 % | Insulation Resistance0.02 GΩ | Ceramic TypeX7R Class II | Length3.2 mm | Width1.6 mm | Height1.6 mm | Pad Dimension0.5 mm | Packaging7" Tape & Reel | Operating Temperature -55 °C up to +125 °C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||||
![]() | WCAP-ATUL Aluminum Electrolytic Capacitors, 47 µF, ±20% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-ATUL Aluminum Electrolytic Capacitors | Capacitance47 µF | Capacitance±20% | Rated Voltage35 V (DC) | – | – | Dissipation Factor12 % | – | – | Length11 mm | – | – | – | PackagingAmmopack | – | – | Endurance 5000 | Ripple Current280 mA | Leakage Current16.45 µA | Pitch2 mm | Diameter5 mm | – | – | – | – | – | – | – | – | – | – | ||||
![]() | WE-VD Disk Varistor, –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-VD Disk Varistor | – | – | – | Size7 mm | – | – | – | – | Length9 mm | Width3.9 mm | Height12.5 mm | – | – | Operating Temperature -40 °C up to +105 °C | – | – | – | – | – | Diameter9 mm | AC Operating Voltage275 V | DC Operating Voltage350 V | (Reverse) Breakdown Voltage430 V | (Reverse) Peak Pulse Current1200 A | Energy Absorption33 J | Power Dissipation0.25 W | VDE ApprovalYes | – | – | – | ||||
![]() | WE-FI Leaded Toroidal Line Choke, –, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-FI Leaded Toroidal Line Choke | – | – | – | – | – | – | – | – | Length16.5 mm | Width10.7 mm | – | – | – | Operating Temperature -40 °C up to +105 °C | – | – | – | – | – | – | – | – | – | – | – | – | – | Inductance150 µH | Rated Current2.5 A | DC Resistance0.1 Ω |