IC manufacturers STMicroelectronics

IC manufacturers (103)

STMicroelectronics SPIRIT1 | Demoboard STEVAL-IKR002V4

Low cost, low data-rate short-range USB dongle transceiver in 868 MHz band based on the SPIRIT1

Overview

TopologyOther Topology
IC revision1

Description

The STEVAL-IKR002V4 development kit includes 2 RF daughterboards based on the SPIRIT1 low power, sub-GHz low data rate transceiver suitable for ISM bands and wireless M-BUS, and 2 motherboards based on the STM32L low power microcontroller to control the daughterboards.Each motherboard features a USB connector for PC GUI interaction and firmware updates. A JTAG connector allows the development of specific firmware on the microcontroller.

Features

  • 2 SPIRIT1 low power, sub-GHz RF transceiver daughterboards tuned for the 915 MHz band
  • 2 STM32L microcontroller-based motherboards
  • Suitable for wireless M-BUS systems
  • Associated SPIRIT1 software development kit with documentation, STM32L firmware and GUI
  • Debug connector
  • USB interface
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate from 1 to 500 kbps
  • Very low power consumption (9 mA RX and 21 mA TX at +11 dBm)
  • Excellent performance of receiver sensitivity (up to -120 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Typical applications

  • Industrial monitoring and control
  • Home and building automation
  • AMR (automatic meter reading) / WSN (wireless sensors network) / Wireless fire and security alarm systems / Point-to-point wireless link

Products

Order Code
Data­sheet
Simu­lation
Downloads
Status
Product series
L(µH)
IRP,40K(A)
Q(%)
fres(MHz)
Mount
Z @ 100 MHz(Ω)
Zmax(Ω)
Test Condition Zmax
IR 2(mA)
RDC max.(mΩ)
Type
Samples
WE-GF SMT Wire Wound Inductor, 2.2 µH, 0.75 A
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Inductance2.2 µH
Performance Rated Current0.75 A
Q-Factor30 %
Self Resonant Frequency100 MHz
MountSMT 
DC Resistance1000 mΩ
WE-CBF SMT EMI Suppression Ferrite Bead, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
MountSMT 
Impedance @ 100 MHz30 Ω
Maximum Impedance55 Ω
Maximum Impedance1000 MHz 
Rated Current 23000 mA
DC Resistance25 mΩ
TypeHigh Current