| Topology | Wireless Power Transfer |
| Input voltage | 20 V |
| Output 1 | 12 V / 1.5 A |
| IC revision | 001 |
BD57015GWL is a stand-alone wireless power receiver IC. The device integrates a fully synchronous rectifier circuit withlow-impedance FETs, Qi compliant and PMA compliantpacket controller, adjustable regulated voltage output, and an open-drain output terminal to communicate with the power transmitter using amplitude modulation. BD57015GWL is targeted at mobile applicationsimplementing wireless charging compliant to Qi Medium Power standard and the PMA standard.
Low Impedance FET rectifier High efficiency fully synchronous rectifier Maximum Input Voltage of 20V Supports Qi standard ver1.2, PMA standard SR1 Automatic Detection of Qi / PMA, or selection byexternal pin Open-Drain output terminal for modulation TX-RX coil Position Gap alarm
Order Code | Datasheet | Simulation | Downloads | Status | Product series | C | Tol. C | VR(V (DC)) | Operating Temperature | DF(%) | RISO | Ceramic Type | L(mm) | W(mm) | Fl(mm) | Packaging | Pins | Type | Mount | Working Voltage(V (AC)) | H(mm) | Operation Force(g) | Electrical Life(Cycles) | Actuator Color | Washable | Vaporphase process | Compliance | Size | L(µH) | IR(A) | RDC max.(mΩ) | fres(MHz) | Q(%) | P(W) | Samples | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| WCAP-CSGP MLCCs 50 V(DC), 1 nF, ±5% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 50 V(DC) | Capacitance1 nF | Capacitance±5% | Rated Voltage50 V (DC) | Operating Temperature -55 °C up to +125 °C | – | Insulation Resistance10 GΩ | Ceramic TypeNP0 Class I | Length1.6 mm | Width0.8 mm | Pad Dimension0.4 mm | Packaging7" Tape & Reel | – | – | – | – | Height0.8 mm | – | – | – | – | – | – | Size0603 | – | – | – | – | Q-Factor1000 % | – | |||||
| WCAP-CSGP MLCCs 16 V(DC), 100 nF, ±10% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 16 V(DC) | Capacitance100 nF | Capacitance±10% | Rated Voltage16 V (DC) | Operating Temperature -55 °C up to +125 °C | Dissipation Factor5 % | Insulation Resistance5 GΩ | Ceramic TypeX7R Class II | Length1 mm | Width0.5 mm | Pad Dimension0.25 mm | Packaging7" Tape & Reel | – | – | – | – | Height0.5 mm | – | – | – | – | – | – | Size0402 | – | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 16 V(DC), 100 nF, ±10% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 16 V(DC) | Capacitance100 nF | Capacitance±10% | Rated Voltage16 V (DC) | Operating Temperature -55 °C up to +125 °C | Dissipation Factor3.5 % | Insulation Resistance5 GΩ | Ceramic TypeX7R Class II | Length1.6 mm | Width0.8 mm | Pad Dimension0.4 mm | Packaging7" Tape & Reel | – | – | – | – | Height0.8 mm | – | – | – | – | – | – | Size0603 | – | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 25 V(DC), 100 nF, ±10% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 25 V(DC) | Capacitance100 nF | Capacitance±10% | Rated Voltage25 V (DC) | Operating Temperature -55 °C up to +125 °C | Dissipation Factor3.5 % | Insulation Resistance5 GΩ | Ceramic TypeX7R Class II | Length1.6 mm | Width0.8 mm | Pad Dimension0.4 mm | Packaging7" Tape & Reel | – | – | – | – | Height0.8 mm | – | – | – | – | – | – | Size0603 | – | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 25 V(DC), 1 µF, ±10% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 25 V(DC) | Capacitance1 µF | Capacitance±10% | Rated Voltage25 V (DC) | Operating Temperature -55 °C up to +125 °C | Dissipation Factor10 % | Insulation Resistance0.5 GΩ | Ceramic TypeX7R Class II | Length1.6 mm | Width0.8 mm | Pad Dimension0.4 mm | Packaging7" Tape & Reel | – | – | – | – | Height0.8 mm | – | – | – | – | – | – | Size0603 | – | – | – | – | – | – | |||||
![]() | WE-WPCC Wireless Power Transfer Receiver Coil, –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-WPCC Wireless Power Transfer Receiver Coil | – | – | – | Operating Temperature -20 °C up to +105 °C | – | – | – | Length40 mm | Width40 mm | – | – | Pins2 | – | MountTHT | – | Height1.2 mm | – | – | – | – | – | Complianceworks with Qi Rx IC's | Size40 x 40 x 1.2 mm | Inductance8 µH | Rated Current5 A | DC Resistance80 mΩ | Self Resonant Frequency16 MHz | Q-Factor30 % | Power Capability [1]80 W | ||||
![]() | WR-PHD Socket Header - Single, –, – | Simulation– | Downloads7 files | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-PHD Socket Header - Single | – | – | – | Operating Temperature -40 °C up to +105 °C | – | Insulation Resistance1000 MΩ | – | Length25.9 mm | – | – | PackagingTray | Pins10 | TypeStraight | MountTHT | Working Voltage250 V (AC) | – | – | – | – | – | – | – | – | – | Rated Current3 A | – | – | – | – | ||
![]() | WS-TASU SMT Tact Switch 3.5x2.9 mm side push, –, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWS-TASU SMT Tact Switch 3.5x2.9 mm side push | – | – | Rated Voltage12 V (DC) | Operating Temperature -40 °C up to +85 °C | – | Insulation Resistance100 MΩ | – | – | – | – | PackagingTape and Reel | – | – | – | – | Height1.35 mm | Operation Force220 g | Electrical Life100000 Cycles | Actuator ColorWhite | WashableNo | Vaporphase processnot specified | – | – | – | Rated Current0.05 A | – | – | – | – | |||
![]() | WR-PHD Pin Header - Single, –, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-PHD Pin Header - Single | – | – | – | Operating Temperature -40 °C up to +105 °C | – | Insulation Resistance1000 MΩ | – | Length25.4 mm | – | – | PackagingBag | Pins10 | TypeStraight | MountTHT | Working Voltage250 V (AC) | – | – | – | – | – | – | – | – | – | Rated Current3 A | – | – | – | – |