| Topology | Buck Converter |
| Input voltage | 4-40 V |
| Switching frequency | 450-2250 kHz |
| Output 1 | 24 V |
Qorvo's ACT4751M is an automotive grade, programmable voltage regulator with bias supply rails for microcontrollers or USB PD controllers. It supports a wide input voltage range from 4.5 to 40 V and uses a synchronous step-down (buck) DC-to-DC architecture. It integrates both the high side and low side MOSFETS. These 50 mOhm on-resistance transistors enable high efficiency to reduce power losses.The product's main buck converter can be dynamically programed to an output voltage between 3 and 24 V in 12.5 mV steps via the I2C interface or analog feedback. It also can dynamically program output current between 0 and 4 A in 256 steps via the I2C interface in a constant-current (CC) operation mode. The main buck operates in a proprietary current mode control that supports external clock syncing for switching frequencies between 450 kHz and 2.25 MHz with features of 100% duty, out-of-AM radio frequency and spread-spectrum operation.ACT4751M is a perfect solution for USB Fast Charger applications based on the Power Delivery (PD) 3.0 and Programmable Power Supply (PPS) applications. The product integrates a 5 V / 350 mA mini-buck converter and a 20 mA AUX LDO of 0.9 V to 4.0 V to simplify application system designs. These rails can power up a controller and the 1.5 W VCONN line in active USB-C cables.ACT4751M provides an I2C port supporting fast-mode plus (Fm+, 1 MHz) with configurable address and also provides a full set of protections including UVLO, over-voltage input voltage lockout, OVP, UVP (Hiccup/Latch-off), OCP and TSD.ACT4751M is available in an AEC-Q100 grade, step-cut, side-wall-plating, 32-pin 5mm x 5mm QFN package with a power optimized footprint and exposed pad for improved thermal performance.
Order Code | Datasheet | Simulation | Downloads | Status | Product series | λDom typ.(nm) | Emitting Color | λPeak typ.(nm) | IV typ.(mcd) | VF typ.(V) | Chip Technology | 2θ50% typ.(°) | L(µH) | IR(A) | ISAT(A) | RDC(mΩ) | fres(MHz) | IRP,40K(A) | ISAT,30%(A) | RDC typ.(mΩ) | RDC max.(mΩ) | Mount | C | VR(V (DC)) | Endurance(h) | IRIPPLE(mA) | ILeak(µA) | DF(%) | Pitch(mm) | Ø D(mm) | L(mm) | Packaging | Interface Type | Type | Gender | Pins | PCB Thickness(mm) | Working Voltage(V (DC)) | Samples | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | WL-SMCW SMT Mono-color Chip LED Waterclear, 470 nm, Blue | Downloads27 files RAY files
| Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWL-SMCW SMT Mono-color Chip LED Waterclear | Dominant Wavelength [typ.]470 nm | Emitting ColorBlue | Peak Wavelength [typ.]465 nm | Luminous Intensity [typ.]145 mcd | Forward Voltage [typ.]3.2 V | Chip TechnologyInGaN | Viewing Angle Phi 0° [typ.]140 ° | – | – | – | – | – | – | – | – | – | MountSMT | – | – | – | – | – | – | – | – | Length1.6 mm | PackagingTape and Reel | – | – | – | – | – | – | |||
![]() | WE-XHMI SMT Power Inductor, –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-XHMI SMT Power Inductor | – | – | – | – | – | – | – | Inductance4.7 µH | Rated Current9.5 A | – | DC Resistance8.65 mΩ | Self Resonant Frequency22 MHz | Performance Rated Current13.35 A | Saturation Current @ 30%16.65 A | DC Resistance8.65 mΩ | DC Resistance9.51 mΩ | MountSMT | – | – | – | – | – | – | – | – | Length8.8 mm | – | – | – | – | Pins2 | – | – | ||||
![]() | WCAP-ATG8 Aluminum Electrolytic Capacitors, –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-ATG8 Aluminum Electrolytic Capacitors | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Capacitance100 µF | Rated Voltage50 V (DC) | Endurance 2000 | Ripple Current286 mA | Leakage Current50 µA | Dissipation Factor10 % | Pitch3.5 mm | Diameter8 mm | Length11.5 mm | PackagingAmmopack | – | – | – | – | – | – | ||||
![]() | WE-LQS SMT Power Inductor, –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-LQS SMT Power Inductor | – | – | – | – | – | – | – | Inductance47 µH | Rated Current0.71 A | Saturation Current0.45 A | DC Resistance492 mΩ | Self Resonant Frequency15 MHz | – | – | – | – | MountSMT | – | – | – | – | – | – | – | – | Length4 mm | – | – | – | – | – | – | – | ||||
![]() | WR-USB Type C Connectors, –, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-USB Type C Connectors | – | – | – | – | – | – | – | – | Rated Current5 A | – | – | – | – | – | – | – | MountTHR | – | – | – | – | – | – | – | – | – | PackagingTape and Reel | Interface TypeType C | TypeHorizontal | GenderReceptacle | Pins24 | PCB Thickness1 mm | Working Voltage48 V (DC) | |||
![]() | WR-USB Standard Connectors, –, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-USB Standard Connectors | – | – | – | – | – | – | – | – | Rated Current1.5 A | – | – | – | – | – | – | – | MountSMT | – | – | – | – | – | – | – | – | – | PackagingTray | Interface TypeType A | TypeHorizontal | GenderReceptacle | Pins4 | – | Working Voltage30 V (DC) |