IC manufacturers Onsemi

IC manufacturers (103)

Onsemi FAN6961

FAN6961Boundary Mode PFC Controller

Overview

TopologyPower Factor Correction
Input voltage90-265 V
IC revision1.0.6

Description

The FAN6961 is an 8-pin, boundary-mode, PFC controller IC intended for controlling PFC pre-regulators. The FAN6961 provides a controlled on-time to regulate the output DC voltage and achieve natural power factor correction. The maximum on-time of the external switch is programmable to ensure safe operation during AC brownouts. An innovative multi-vector error amplifier is built in to provide rapid transient response and precise output voltage clamping. A built-in circuit disables the controller if the output feedback loop is opened. The startup current is lower than 20µA and the operating current has been reduced to under 6mA. The supply voltage can be up to 25V, maximizing application flexibility.

Features

  • Boundary Mode PFC Controller
  • Low Input Current THD
  • Controlled On-Time PWM
  • Zero-Current Detection
  • Cycle-by-Cycle Current Limiting
  • Leading-Edge Blanking instead of RC Filtering
  • Low Startup Current: 10µA Typical
  • Low Operating Current: 4.5mA Typical
  • Feedback Open-Loop Protection
  • Programmable Maximum On-Time (MOT)
  • Output Over-Voltage Clamping Protection
  • Clamped Gate Output Voltage 16.5V

Remerks

  • Refer page no-10

Typical applications

  • Flyback power converters with ZCS/ZVC
  • Open Frame power supplies and power Adapters
  • Electric Lamp Ballasts
  • AC-DC Swithing Mode power converter

Products

Order Code
Data­sheet
Simu­lation
Downloads
Status
Product series
Pins
PCB/Cable/Panel
Modularity
Type
Wire Section
ISAT(A)
fres(MHz)
Size
Version
L(µH)
Q(%)
IR(mA)
RDC max.(mΩ)
Samples
WE-PD SMT Power Inductor, 2, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Pins
Saturation Current0.55 A
Self Resonant Frequency1.7 MHz
Size1050 
VersionPerformance 
Inductance1000 µH
DC Resistance2050 mΩ
WR-TBL Series 101 - 5.00 mm Horizontal Entry Modular, 3, Wire Protector
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Pins
PCB/Cable/PanelPCB 
ModularityYes 
TypeHorizontal 
Wire Section 26 to 14 (AWG) 0.5 to 2.5 (mm²)
WE-MI SMT Multilayer Inductor, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Self Resonant Frequency85 MHz
Size0805 
Inductance1 µH
Q-Factor45 %
Rated Current50 mA
DC Resistance400 mΩ
750341751
Inductor, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Product series Inductor
Saturation Current3 A
SizePQ2625 
Inductance210 µH