IC manufacturers Microchip

IC manufacturers (103)

Microchip MCP1642 | Demoboard MCP1642B-50I/MS

MCP1642B/D Two-Cell to USB Power Evaluation Board User’s Guide

Overview

TopologyOther Topology
IC revisionA

Description

The MCP1642B/D are compact, high-efficiency, fixed-frequency, step-up DC-DC converters. These products provide an easy-to-use power supply solution, with a minimum number of external components for applications powered by one-cell, two-cell, orthree-cell alkaline, Ni-Cd, Ni-MH, one-cell Li-Ion or Li-Polymer batteries.The MCP1642B/D devices operate in Pulse-Width Modulation (PWM), at a fixed 1 MHz switching frequency, featuring Internal Compensation, Overtemperature Protectionand Power Good Open-Drain Output. The device has 1.8V start-up voltage at 5V output and 1 mA load current.There are two shutdown options for the MCP1642B/D family:• True Output Disconnect mode (MCP1642B/D)• Input-to-Output Bypass mode (MCP1642D)For the fixed-output voltage option of the MCP1642B/D devices, the VFB pin is not connected. The output voltage is set by an internal feedback divider. The fixed valuesare: 1.8V, 3.0V, 3.3V, 5.0V (see Table 1-1).On the MCP1642B/D Two-Cells to USB Power Evaluation Board, the fixed output voltage version (MCP1642B/D-50) is used.The goal of the MCP1642B/D Two-Cells to USB Power Evaluation Board is to demonstrate the higher output current capabilities of the MCP1642B/D, supplied fromtwo AA batteries.

Features

  • It can be powered by two AA batteries or external power supply
  • Input voltage range (VIN): 1.8V to 5.5V, with VIN  VOUT
  • Minimum start-up voltage: 1.8V at VOUT = 5.0V and IOUT = 1 mA, resistive load
  • Output voltage: 5.0V
  • Output current: typical 700 mA @ 5V output, 2.8V input
  • PWM operation
  • PWM switching frequency: 1 MHz
  • Power Good indicator 2 mA LED
  • Enable state selectable using EN switch
  • Peak input current limit of 1.8A
  • Overtemperature protection (if the die temperature exceeds +150°C, with 35°Chysteresis)
  • USB A output connector

Products

Order Code
Data­sheet
Simu­lation
Downloads
Status
Product series
λDom typ.(nm)
Emitting Color
λPeak typ.(nm)
IV typ.(mcd)
VF typ.(V)
Chip Technology
50% typ.(°)
Interface Type
Type
Gender
Pins
Mount
IR(mA)
Working Voltage(V (AC))
Packaging
Poles
L(mm)
Vaporphase process
Samples
WL-SMCW SMT Mono-color Chip LED Waterclear, 625 nm, Red
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Dominant Wavelength [typ.]625 nm
Emitting ColorRed 
Peak Wavelength [typ.]630 nm
Luminous Intensity [typ.]250 mcd
Forward Voltage [typ.]2 V
Chip TechnologyAlInGaP 
Viewing Angle Phi 0° [typ.]140 °
MountSMT 
PackagingTape and Reel 
Length1.6 mm
WS-DISV Small Compact SMT with Raised Actuator 2.54 mm, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Rated Current25 mA
PackagingTape and Reel 
Poles
Length3.48 mm
Vaporphase processnot specified 
WR-USB Standard Connectors, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Interface TypeType A 
TypeHorizontal 
GenderReceptacle 
Pins
MountSMT 
Rated Current1500 mA
Working Voltage30 V (AC)
PackagingTray