| Topology | Buck Converter |
| Input voltage | 4.5-18 V |
| Output 1 | 15 V / 1.5 A |
| IC revision | 1.0 |
The LX7104 is a 1.4MHz fixed frequency, current mode, PWM buck (step-down) DC-DC converter, capable of driving a 1.5A load with high efficiency, excellent line and load regulation. The device integrates a N-channel power MOSFET switch with low on-resistance. The converter accepts a wide input voltage range from 4.5V to 18V, and provides an output voltage adjustable typically from 0.81 to 15V.Soft-start is built in, and current mode control provides fast transient response and cycle-by-cycle current limit. Short circuit protection will be triggered when current is over limit and FB is below 0.25V.The LX7104ISF is available in SOT23-6 package.
Order Code | Datasheet | Simulation | Downloads | Status | Product series | C | Tol. C | VR(V (DC)) | Size | Operating Temperature | Q(%) | DF(%) | RISO | Ceramic Type | L(mm) | W(mm) | H(mm) | Fl(mm) | Packaging | L(µH) | IRP,40K(A) | ISAT,30%(A) | RDC typ.(mΩ) | fres(MHz) | VOP(V) | Mount | Samples | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| WCAP-CSGP MLCCs 10 V(DC), 10 nF, ±5% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 10 V(DC) | Capacitance10 nF | Capacitance±5% | Rated Voltage10 V (DC) | Size0805 | Operating Temperature -55 °C up to +125 °C | Q-Factor1000 % | – | Insulation Resistance10 GΩ | Ceramic TypeNP0 Class I | Length2 mm | Width1.25 mm | Height1.25 mm | Pad Dimension0.5 mm | Packaging7" Tape & Reel | – | – | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 10 V(DC), 100 nF, ±10% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 10 V(DC) | Capacitance100 nF | Capacitance±10% | Rated Voltage10 V (DC) | Size0805 | Operating Temperature -55 °C up to +125 °C | – | Dissipation Factor5 % | Insulation Resistance5 GΩ | Ceramic TypeX7R Class II | Length2 mm | Width1.25 mm | Height0.8 mm | Pad Dimension0.5 mm | Packaging7" Tape & Reel | – | – | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 25 V(DC), 10 µF, ±10% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 25 V(DC) | Capacitance10 µF | Capacitance±10% | Rated Voltage25 V (DC) | Size1206 | Operating Temperature -55 °C up to +125 °C | – | Dissipation Factor10 % | Insulation Resistance0.01 GΩ | Ceramic TypeX7R Class II | Length3.2 mm | Width1.6 mm | Height1.6 mm | Pad Dimension0.5 mm | Packaging7" Tape & Reel | – | – | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 6.3 V(DC), 22 µF, ±20% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 6.3 V(DC) | Capacitance22 µF | Capacitance±20% | Rated Voltage6.3 V (DC) | Size0805 | Operating Temperature -55 °C up to +85 °C | – | Dissipation Factor15 % | Insulation Resistance0.005 GΩ | Ceramic TypeX5R Class II | Length2 mm | Width1.25 mm | Height1.25 mm | Pad Dimension0.5 mm | Packaging7" Tape & Reel | – | – | – | – | – | – | – | |||||
![]() | WE-MAPI SMT Power Inductor, –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-MAPI SMT Power Inductor | – | – | – | Size4030 | Operating Temperature -40 °C up to +125 °C | – | – | – | – | Length4.3 mm | Width4.3 mm | Height3.1 mm | – | – | Inductance4.7 µH | Performance Rated Current5.1 A | Saturation Current @ 30%8.2 A | DC Resistance39.9 mΩ | Self Resonant Frequency24 MHz | Operating Voltage80 V | MountSMT |