| Topology | Other Topology |
The EPC9509 is a high efficiency, Zero Voltage Switching (ZVS), class-Dwireless power amplifier demonstration board that operates at 6.78 MHz(Lowest ISM band). The purpose of this demonstration system is to simplifythe evaluation process of wireless power amplifier technology usingeGaN® FETs by including all the critical components on a single boardthat can be easily connected into an existing system.The amplifier board features the enhancement-mode, half-bridge fieldeffect transistor (FET), the 60 V rated EPC2108 eGaN FET with integratedsynchronous bootstrap FET. The amplifier can be set to operate in eitherdifferential mode or single-ended mode and includes the gate driver/s,oscillator, and feedback controller for the pre-regulator that ensuresoperation for wireless power control based on the A4WP standard. Thisallows for testing compliant to the A4WP class 3 standard over a loadrange as high as ±50j Ω. The pre-regulator features the 100 V rated 65 mΩEPC2036 as the main switching device for a SEPIC converter.For more information on the EPC2108 eGaN FETs please refer to the datasheetavailable from EPC at www.epc-co.com. The datasheet should beread in conjunction with this quick start guide
Order Code | Datasheet | Simulation | Downloads | Status | Product series | C | Tol. C | VR(V (DC)) | Size | Operating Temperature | Q(%) | DF(%) | RISO | Ceramic Type | L(mm) | W(mm) | H(mm) | Fl(mm) | Packaging | L(nH) | Tol. L | Test Condition L | Qmin. | Test Condition Q | RDC max.(mΩ) | IR(A) | fres(GHz) | Pins | Type | Mount | Working Voltage(V (AC)) | IR(A) | PCB/Cable/Panel | Samples | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| WCAP-CSGP MLCCs 50 V(DC), 22 pF, ±5% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 50 V(DC) | Capacitance22 pF | Capacitance±5% | Rated Voltage50 V (DC) | Size0402 | Operating Temperature -55 °C up to +125 °C | Q-Factor840 % | – | Insulation Resistance10 GΩ | Ceramic TypeNP0 Class I | Length1 mm | Width0.5 mm | Height0.5 mm | Pad Dimension0.25 mm | Packaging7" Tape & Reel | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 25 V(DC), 22 nF, ±10% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 25 V(DC) | Capacitance22 nF | Capacitance±10% | Rated Voltage25 V (DC) | Size0402 | Operating Temperature -55 °C up to +125 °C | – | Dissipation Factor3.5 % | Insulation Resistance10 GΩ | Ceramic TypeX7R Class II | Length1 mm | Width0.5 mm | Height0.5 mm | Pad Dimension0.25 mm | Packaging7" Tape & Reel | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 16 V(DC), 100 nF, ±10% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 16 V(DC) | Capacitance100 nF | Capacitance±10% | Rated Voltage16 V (DC) | Size0402 | Operating Temperature -55 °C up to +125 °C | – | Dissipation Factor5 % | Insulation Resistance5 GΩ | Ceramic TypeX7R Class II | Length1 mm | Width0.5 mm | Height0.5 mm | Pad Dimension0.25 mm | Packaging7" Tape & Reel | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 25 V(DC), 1 µF, ±10% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 25 V(DC) | Capacitance1 µF | Capacitance±10% | Rated Voltage25 V (DC) | Size0603 | Operating Temperature -55 °C up to +125 °C | – | Dissipation Factor10 % | Insulation Resistance0.5 GΩ | Ceramic TypeX7R Class II | Length1.6 mm | Width0.8 mm | Height0.8 mm | Pad Dimension0.4 mm | Packaging7" Tape & Reel | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 50 V(DC), 1 µF, ±10% | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 50 V(DC) | Capacitance1 µF | Capacitance±10% | Rated Voltage50 V (DC) | Size0805 | Operating Temperature -55 °C up to +125 °C | – | Dissipation Factor10 % | Insulation Resistance0.1 GΩ | Ceramic TypeX7R Class II | Length2 mm | Width1.25 mm | Height1.25 mm | Pad Dimension0.5 mm | Packaging7" Tape & Reel | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||||
![]() | WE-CAIR Air Coil, –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-CAIR Air Coil | – | – | – | Size4248 | Operating Temperature -40 °C up to +125 °C | – | – | – | – | Length4.83 mm | Width3.81 mm | Height4.2 mm | – | – | Inductance82 nH | Inductance±5% | Inductance150 MHz | Q-Factor100 | Q-Factor150 MHz | DC Resistance9.4 mΩ | Rated Current2.5 A | Self Resonant Frequency1.3 GHz | – | – | MountSMT | – | – | – | ||||
![]() | WR-PHD Pin Header - Single, –, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-PHD Pin Header - Single | – | – | – | – | Operating Temperature -40 °C up to +105 °C | – | – | Insulation Resistance1000 MΩ | – | Length2.54 mm | – | – | – | PackagingBag | – | – | – | – | – | – | Rated Current3 A | – | Pins1 | TypeStraight | MountTHT | Working Voltage250 V (AC) | – | – | |||
![]() | WR-PHD Pin Header - Single, –, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-PHD Pin Header - Single | – | – | – | – | Operating Temperature -40 °C up to +105 °C | – | – | Insulation Resistance1000 MΩ | – | Length5.08 mm | – | – | – | PackagingBag | – | – | – | – | – | – | Rated Current3 A | – | Pins2 | TypeStraight | MountTHT | Working Voltage250 V (AC) | – | – | |||
![]() | WR-WTB 3.96 mm Male Header, –, – | Simulation– | Downloads7 files | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-WTB 3.96 mm Male Header | – | – | – | – | Operating Temperature -40 °C up to +105 °C | – | – | Insulation Resistance1000 MΩ | – | Length7.92 mm | – | – | – | PackagingBag | – | – | – | – | – | – | Rated Current7 A | – | Pins2 | TypeVertical | MountTHT | Working Voltage250 V (AC) | Rated Current7 A | PCB/Cable/PanelPCB |