IC manufacturers Infineon Technologies

IC manufacturers (103)

Infineon Technologies CYUSB4347 | Demoboard HX3PD_Gen2

HX3PD USB 3.1 Gen 2 Type-C Hub with PD

Overview

TopologyOther Topology
IC revisionRev4

Description

HX3PD is a family of USB 3.1 Gen 2 Type-C Hubs with USB Power Delivery (PD) which complies with the USB 3.1 Gen 2 specification, Type-C v1.2, and USB PD 3.0 v1.1 standards.

Features

  • USB 3.1 Gen 2-compliant Hub Controller with 7 downstream ports
    • Five downstream ports support SS+ (10 Gbps), SS (5 Gbps), and are backward-compatible with HS (480 Mbps), FS (12Mbps), and LS (1.5 Mbps)
    • Two downstream ports support HS (480 Mbps), and are backward-compatible with FS (12 Mbps), and LS (1.5 Mbps)
    • SS+, SS and USB 2.0 Link Power Management (LPM)
    • Dedicated Hi-Speed Transaction Translators (Multi-TT)
    • Configurable USB SS+ and USB 2.0 PHY
  • Integrated Type-C transceivers, supporting Type-C plug orientation
    • Type-C supported in four ports (1 US port and 3 DS ports)
    • Integrated transceiver (baseband PHY)
    • Integrated UFP (RD), and current sources for DFP (RP)
  • Integrated PD controllers, supporting PD 3.0 specification in US port and 1 DS port
  • Upstream: Configurable as either Type-C or Type-B port
  • Downstream: Configurable as either three Type-C and four Type-A ports, or seven Type-A ports
  • Compound USB PD hub with integrated USB device controller support:
    • USB Billboard
    • USB Type-C Bridge
    • In-system firmware upgrade
    • Vendor specific messaging
  • Integrated Dock Management Controller support
    • Signed and Non-signed firmware updates
    • Firmware upgrade over USB
    • Dynamic configurations of port enable and disable from Embedded Controllers over I2C
  • Charging Standard support:
    • USB Power Delivery (PD) 3.0, Battery Charging v1.2 and Apple Charging Standards
  • PD policy engine configures power profiles dynamically
  • Ghost Charge™: Charging DS port without US connection
  • 192-ball BGA (12 mm × 12 mm, 0.8-mm ball-pitch)

Typical applications

  • Docking Station / Mornitor

More information

Products

Order Code
Data­sheet
Simu­lation
Downloads
Status
Product series
L(µH)
IRP,40K(A)
ISAT,10%(A)
ISAT,30%(A)
RDC(mΩ)
fres(MHz)
Material
C
VR(V (DC))
Endurance(h)
IRIPPLE(mA)
RESR(mΩ)
ILeak(µA)
DF(%)
Pitch(mm)
Ø D(mm)
L(mm)
Packaging
Pins
Center pin Ø (Value)(mm)
Plug OD(mm)
Type
IR(A)
Working Voltage(V (DC))
Samples
WE-HCI SMT Flat Wire High Current Inductor, 4.2 µH, 15.4 A
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Inductance4.2 µH
Performance Rated Current15.4 A
Saturation Current @ 10%5 A
Saturation Current @ 30%14 A
DC Resistance7.1 mΩ
Self Resonant Frequency33 MHz
MaterialSuperflux 
Length10.5 mm
Pins
WCAP-PTHR Aluminum Polymer Capacitors, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance47 µF
Rated Voltage35 V (DC)
Endurance 2000
Ripple Current2890 mA
ESR25 mΩ
Leakage Current329 µA
Dissipation Factor12 %
Pitch3.5 mm
Diameter8 mm
Length11.5 mm
PackagingAmmopack 
WR-DC Power Jacks, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Product seriesWR-DC Power Jacks
PackagingBag 
Center pin Ø2 mm
Recommended Plug outer Ø5.5 mm
TypeRight Angled 
Rated Current5 A
Working Voltage30 V (DC)