| Topology | Other Topology |
| Input voltage | 5-32 V |
| Output 1 | 3.3 V |
| IC revision | PrA |
The EVAL-ADIN1100EBZ is a flexible platform enabling quick evaluation of ADIN1100, robust, low power 10BASE-T1L PHY. It provides 10Mbit per second Single Pair Ethernet (SPE) connections with devices over 1.7km of cable.The evaluation board offers two modes of operation for maximum flexibility. Connected to a PC via USB port, the full set of ADIN1100 register settings and features such as link quality monitoring and diagnostics can be accessed with the ADIN1100 Graphical User Interface software.Alternatively, the board can operate in stand-alone mode where it is configured by setting hardware configuration links and switches. Onboard LEDs provide status indication.The ADIN1100 data (MII, RMII and RGMII) and management (MDIO) interfaces are accessible on header connectors for easy connection to an external host controller.A small prototyping area and test points are provided for experimentation with alternative cable connection topologies including isolation transformers and/or power coupling inductors.The platform can perform as a 10BASE-T1L to 10BASE-T media converter. This enables connection to other devices – demos or a custom protypes – with a 10BASE-T1L Ethernet port and conversion of the data to standard Ethernet accessible via the RJ45 connector.
Order Code | Datasheet | Simulation | Downloads | Status | Product series | Data rate | PoE | Ports | Tab | Improved CMRR | Operating Temperature | LED | PHY Chip Mode | Mount | USB | Shield Tabs | Z @ 100 MHz(Ω) | Zmax(Ω) | Test Condition Zmax | IR 2(mA) | RDC max.(Ω) | Type | Winding Style | Number of windings | L(µH) | IR(mA) | VR(V) | Channels | Polarity | VCh max.(V) | ICh Leak max.(µA) | VBR min.(V) | CCh typ.(pF) | IPeak(A) | VCh Clamp ESD typ.(V) | VESD Contact(kV) | SamplesAvailability & Sample | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | SPECWE-RJ45 LAN Through Hole Reflow, 100BASE-TX, PoE+ | Availability – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-RJ45 LAN Through Hole Reflow | Data rate100BASE-TX | PoEPoE+ | Ports1x1 | Tab PositionUp | Improved Common Mode RejectionNo | Operating Temperature -40 °C up to +85 °C | LED (Left-Right)green/yellow - green/yellow | PHY Chip Modecurrent | MountTHR | USBNo | Shield TabsNo | – | – | – | – | – | – | – | – | Inductance350 µH | – | – | – | – | – | – | – | – | – | – | – | –Check availability | |||
![]() | SPECWE-CBF SMT EMI Suppression Ferrite Bead, –, – | Availability – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-CBF SMT EMI Suppression Ferrite Bead | – | – | – | – | – | Operating Temperature -55 °C up to +125 °C | – | – | MountSMT | – | – | Impedance @ 100 MHz1000 Ω | Maximum Impedance1050 Ω | Maximum Impedance120 MHz | Rated Current 2830 mA | DC Resistance0.3 Ω | TypeWide Band | – | Number of windings1 | – | Rated Current600 mA | – | – | – | – | – | – | – | – | – | – | –Check availability | |||
![]() | SPECWE-SLM SMT Common Mode Line Filter, –, – | Availability – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-SLM SMT Common Mode Line Filter | – | – | – | – | – | Operating Temperature -40 °C up to +125 °C | – | – | MountSMT | – | – | – | Maximum Impedance2200 Ω | – | – | DC Resistance0.35 Ω | – | Winding Stylebifilar | Number of windings2 | Inductance470 µH | Rated Current400 mA | Rated Voltage80 V | – | – | – | – | – | – | – | – | – | –Check availability | |||
![]() | SPECWE-TVS TVS Diode – High Speed Series, –, – | Availability – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-TVS TVS Diode – High Speed Series | – | – | – | – | – | Operating Temperature -55 °C up to +125 °C | – | – | MountSMT | – | – | – | – | – | – | – | – | – | – | – | – | – | Channels4+1 | PolarityUnidirectional | Channel Operating Voltage [max.]5 V | Channel (Reverse) Leakage Current [max.]1 µA | (Reverse) Breakdown Voltage [min.]6.1 V | (Channel) Input Capacitance [typ.]1 pF | (Reverse) Peak Pulse Current12 A | Channel ESD Clamping Voltage [typ.]13 V | ESD Contact Discharge Capability12 kV | –Check availability |
| Expected Availability | Opening inventory | Quantity |
|---|---|---|
| Current Availability | – | – |