IC-Hersteller Texas Instruments

IC-Hersteller (103)

Texas Instruments TPS62160-Q1 | Demoboard PMP22951

3V-17V 1A Automotive Step-Down Converters in 2x2SON

Details

TopologieAbwärtswandler
Eingangsspannung12 V
Ausgang 15 V
IC-RevisionB

Beschreibung

The TPS6216x-Q1 are easy to use synchronous step down DC-DC converters optimized for applications with high power density. A high switching frequency of typically 2.25 MHz allows the use of small inductors and provides fast transient response as well as high output voltage accuracy by using the DCS-Control™ topology.With their wide operating input voltage range of 3 V to 17 V, the devices are ideally suited for systems powered from either a Li-Ion or other battery as well as from 12-V intermediate power rails. It supports up to 1-A continuous output current at output voltages between 0.9 V and 6 V (with 100% duty cycle mode).Power sequencing is also possible by configuring the Enable and open-drain Power Good pins.In Power Save Mode, the devices draw quiescent current of about 17 µA from VIN. Power Save Mode, entered automatically and seamlessly if load is small, maintains high efficiency over the entire load range. In Shutdown Mode, the device is turned off and shutdown current consumption is less than 2 µA.The devices are available in adjustable and fixed output voltage versions and are packaged in an 8-pin WSON package measuring 2 × 2 mm (DSG).

Eigenschaften

  • DCS-Control™ topology
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
  • Device temperature grade: –40°C to 125°C operating junction temperature range
  • Device HBM ESD classification level H2
  • Device CDM ESD classification level C4B
  • Functional Safety-Capable
  • Documentation available to aid functional safety system design
  • Input voltage range: 3 V to 17 V
  • Up to 1-A output current
  • Adjustable output voltage from 0.9 V to 6 V
  • Fixed output voltage versions
  • Seamless power save mode transition
  • Typically 17-µA quiescent current
  • Power-good output
  • 100% Duty cycle mode
  • Short circuit protection
  • Overtemperature protection
  • Pin-to-pin compatible with TPS62170-Q1
  • Available in a 2-mm × 2-mm WSON-8 package

Typische Anwendungen

  • ADAS camera, Infotainment telematics, Body control module and gateway, Powertrain systems

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
C
Tol. C
VR(V (DC))
Bauform
Betriebstemperatur
DF(%)
RISO
Keramiktyp
L(mm)
B(mm)
H(mm)
Fl(mm)
Verpackung
L(µH)
IRP,40K(A)
ISAT,30%(A)
RDC typ.(mΩ)
fres(MHz)
VOP(V)
Montageart
Muster
WCAP-CSGP MLCCs 25 V(DC), 1 nF, ±10%
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität1 nF
Kapazität±10% 
Nennspannung25 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor3.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
WE-MAPI SMT-Speicherdrossel, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform3020 
Betriebstemperatur -40 °C up to +125 °C
Länge3 mm
Breite3 mm
Höhe2 mm
Induktivität2.2 µH
Performance Nennstrom3.6 A
Sättigungsstrom @ 30%5.55 A
Gleichstromwiderstand67 mΩ
Eigenresonanzfrequenz42 MHz
Betriebsspannung80 V
MontageartSMT