| Topologie | SEPIC Buck-Boost Topologie |
| Eingangsspannung | 42-52 V |
| Ausgang 1 | 160 V / 0.9 A |
| Ausgang 2 | 180 V / 0.9 A |
| IC-Revision | B |
A SEPIC converter is used to fast charge a load capacitor up to 160V/180V (selectable). The input voltage range is 47V +/-10% and the constant output charging current 900mA. The SEPIC topology has the advantage to Boost or Buck the output voltage, needed by capacitor charging, since they start at zero volt (short circuit).
Remarks: Schematic and BOM is added with Test procedure PDF
No spikes on the drain of main FET, thanks to SEPIC topologyGood efficiency curve (>91%) at full load and with output voltage >80VTwo active loops: CV and CC stabilize the output voltage in all conditions, during charging and in steady stateThe output voltage can be switched between 160V and 180V on the fly
Artikel Nr. | Datenblatt | Simulation | Downloads | Status | Produktserie | Pins | PCB/Kabel/Panel | Modularity | Typ | Wire Section | L(µH) | IRP,40K(A) | ISAT,10%(A) | ISAT,30%(A) | RDC(mΩ) | fres(MHz) | Material | IR,40K(A) | RDC max.(mΩ) | Bauform | Version | Muster | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | WE-PD Speicherdrossel, 2, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-PD Speicherdrossel | Pins2 | – | – | – | – | Induktivität470 µH | Performance Nennstrom1.45 A | Sättigungsstrom 11.5 A | Sättigungsstrom @ 30%1.85 A | – | Eigenresonanzfrequenz1.8 MHz | – | Nennstrom1.4 A | Gleichstromwiderstand560 mΩ | Bauform1210 | VersionGestanzt | ||||
![]() | WE-HCI SMT-Hochstrominduktivität, 2, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-HCI SMT-Hochstrominduktivität | Pins2 | – | – | – | – | Induktivität82 µH | Performance Nennstrom6.6 A | Sättigungsstrom 17.75 A | Sättigungsstrom @ 30%8.5 A | Gleichstromwiderstand30.4 mΩ | Eigenresonanzfrequenz4.4 MHz | MaterialMnZn | – | Gleichstromwiderstand33.44 mΩ | Bauform2212 | VersionSMT | ||||
![]() | WR-TBL Series 101 - 5.00 mm Horizontal Entry Modular, 2, Kabelschutzprinzip | Simulation– | Downloads6 Dateien | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | Pins2 | PCB/Kabel/PanelPCB | ModularityJa | TypHorizontal | Wire Section 26 to 14 (AWG) 0.5 to 2.5 (mm²) | – | – | – | – | – | – | – | – | – | – | – |