IC-Hersteller Texas Instruments

IC-Hersteller (103)

Texas Instruments LM61460 | Demoboard LM61460-Q1 EVM

3-V to 36-V, 6-A, Low-EMI synchronous step-down converter

Details

TopologieAbwärtswandler
Eingangsspannung3-36 V
Schaltfrequenz200-2200 kHz
Ausgang 15 V / 6 A
IC-RevisionC

Beschreibung

The LM61460 is a high-performance, DC-DC synchronous step-down converter. With integrated high-side and low-side MOSFETs, up to 6 A of output current is delivered over a wide input range of 3.0 V to 36 V; tolerant of 42 V, easing input surge protection design. The LM61460 implements soft recovery from dropout eliminating overshoot on the output.The LM61460 is specifically designed for minimal EMI. The device incorporates adjustable SW node rise time, low-EMI VQFN-HR package featuring low switch node ringing, and optimized pinout for ease of use. The switching frequency can be set or synchronized between 200 kHz and 2.2 MHz to avoid noise sensitive frequency bands. In addition the frequency can be selected for improved efficiency at low operating frequency or smaller solution size at high operating frequency.Auto-mode enables frequency foldback when operating at light loads, allowing an unloaded current consumption of only 7 µA (typical) and high light load efficiency. Seamless transition between PWM and PFM modes, along with very low MOSFET ON resistances and an external bias input, ensures exceptional efficiency across the entire load range.Electrical characteristics are specified over a junction temperature range of –40°C to +150°C.

Eigenschaften

  • Optimized for ultra low EMI requirements
  • Hotrod™ package minimizes switch node ringing
  • Parallel input path minimizes parasitic inductance
  • Adjustable SW node rise time
  • Designed for reliable and rugged applications
  • ±1% total output regulation accuracy
  • VOUT adjustable from 1 V to 95% of VIN
  • 0.4-V dropout with 4-A load (typical)
  • Protection features: thermal shutdown, input undervoltage lockout, cycle-by-cycle current limit, hiccup short-circuit protection
  • High efficiency power conversion at all loads
  • 7-µA no load current at 13.5 VIN, 3.3 VOUT
  • 91% PFM efficiency at 1-mA, 13.5 VIN, 5 VOUT
  • Low MOSFET ON resistance
  • RDS_ON_HS = 41 mΩ (typical)
  • RDS_ON_LS = 21 mΩ (typical)
  • External bias option for improved efficiency
  • Suitable for scalable power supplies
  • Pin compatible with:
  • LM61440-Q1 (36 V, 4 A, adjustable fSW)
  • LM61440 (36 V, 4 A, adjustable fSW)

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
Pins
PCB/Kabel/Panel
Modularity
Typ
Wire Section
C
Tol. C
VR(V (DC))
Bauform
Betriebstemperatur
DF(%)
RISO
Keramiktyp
L(mm)
B(mm)
H(mm)
Fl(mm)
Verpackung
L(µH)
IRP,40K(A)
ISAT,10%(A)
ISAT,30%(A)
RDC(mΩ)
fres(MHz)
Material
RDC typ.(mΩ)
RDC max.(mΩ)
Montageart
Muster
WE-HCI SMT-Hochstrominduktivität, 2, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
Bauform5040 
Betriebstemperatur -40 °C up to +150 °C
Länge5.5 mm
Breite5.3 mm
Höhe4 mm
Induktivität2.2 µH
Performance Nennstrom9.2 A
Sättigungsstrom 13.5 A
Sättigungsstrom @ 30%7.5 A
Gleichstromwiderstand11.3 mΩ
Eigenresonanzfrequenz108 MHz
MaterialSuperflux 
Gleichstromwiderstand12.43 mΩ
MontageartSMT 
WR-TBL Series 101 - 5.00 mm Horizontal Entry Modular, 2, Kabelschutzprinzip
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
PCB/Kabel/PanelPCB 
ModularityJa 
TypHorizontal 
Wire Section 26 to 14 (AWG) 0.5 to 2.5 (mm²)
Betriebstemperatur -40 °C up to +105 °C
Länge10 mm
Höhe12.6 mm
VerpackungKarton 
MontageartTHT 
WE-XHMI SMT Speicherdrossel, 2, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
Bauform6060 
Betriebstemperatur -40 °C up to +125 °C
Länge6.65 mm
Breite6.45 mm
Höhe6.1 mm
Induktivität4.7 µH
Performance Nennstrom9.6 A
Sättigungsstrom 16.5 A
Sättigungsstrom @ 30%13 A
Gleichstromwiderstand13 mΩ
Eigenresonanzfrequenz28 MHz
Gleichstromwiderstand13 mΩ
Gleichstromwiderstand14.3 mΩ
MontageartSMT 
WCAP-CSGP MLCCs 16 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität1 µF
Kapazität±10% 
Nennspannung16 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor10 %
Isolationswiderstand0.1 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel