IC-Hersteller Texas Instruments

IC-Hersteller (96)

Texas Instruments DRV8210DSGR | Demoboard DRV8210EVM

DRV8210 low voltage H-bridge motor driver with low sleep mode evaluation module

Details

TopologieGegentaktwandler (Halbbrücken)
Eingangsspannung1.65-11 V
Ausgang 11.7 A
IC-RevisionA

Beschreibung

The DRV8210 evaluation module (EVM) allows for easy evaluation of the DRV8210 device.The DRV8210 motor driver integrates an N-channel H-bridge, charge pump regulator, and protection circuitry. The device supports PWM (IN1/IN2), phase/enable (PH/EN), independent half-bridge, and parallel half-bridge control mode.The EVM is equiped with potentiometers which are used to set the duty cycle of the input control pins (PH/IN1, EN/IN2).

Eigenschaften

  • N-channel H-bridge motor driver
  • MOSFET on-resistance: HS + LS 1 Ω
  • Drives one bidirectional brushed DC motor
  • Two unidirectional brushed DC motors
  • One single- or dual-coil latching relay
  • Push-pull and bistable solenoids
  • Other resistive, inductive, or LED loads
  • 1.65-V to 11-V operating supply voltage range
  • High output current capability:
  • Full-bridge: 1.76-A peak
  • Half-bridge: 1.76-A peak per output
  • Parallel half-bridge: 3.52-A peak
  • Multiple interfaces for flexibility and reduced GPIO
  • Standard PWM Interface (IN1/IN2)
  • Supports 1.8-V, 3.3-V, and 5-V logic inputs
  • Ultra low-power sleep mode
  • <84.5 nA @ VVM = 5 V, VVCC = 3.3 V, TJ = 25°C
  • Timed autosleep mode to reduce GPIO
  • Protection features
  • Undervoltage lockout (UVLO)
  • Overcurrent protection (OCP)
  • Thermal shutdown (TSD)

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieAnwendungPCB/Kabel/PanelModularityWire SectionλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
CTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
PinsReihenH
(mm)
GenderTypIR
(A)
VerpackungFarbe Muster
691101710002SPEC
6 Dateien WR-TBL Series 101 - 5.00 mm Horizontal Entry Modular Wire Protector PCB Ja 26 to 14 (AWG) 0.5 to 2.5 (mm²) -40 °C up to +105 °C 10 2 12.6 Horizontal 16 Karton
150060VS75000SPEC
6 Dateien WL-SMCW SMT Mono-color Chip LED Waterclear 570 Hellgrün 572 40 2 AlInGaP 140 0603 -40 °C up to +85 °C 1.6 0.8 0.7 Tape and Reel
885012206026SPEC
8 Dateien WCAP-CSGP MLCCs 10 V(DC)1 µF ±10% 10 0603 -55 °C up to +125 °C 100.1 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206034SPEC
8 Dateien WCAP-CSGP MLCCs 16 V(DC)1 nF ±10% 16 0603 -55 °C up to +125 °C 3.510 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012207103SPEC
8 Dateien WCAP-CSGP MLCCs 50 V(DC)1 µF ±10% 50 0805 -55 °C up to +125 °C 100.1 GΩ X7R Klasse II 2 1.25 0.5 1.25 7" Tape & Reel
60900213421SPEC
3 Dateien WR-PHD 2.54 mm Multi-Jumper Jumper with Test Point -40 °C up to +125 °C1000 MΩ 2.44 1 Jumper 3 Beutel Schwarz
61300211121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 5.08 2 Single Pin Header Gerade 3 Beutel
61300311121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 7.62 3 Single Pin Header Gerade 3 Beutel
61300511121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 12.7 5 Single Pin Header Gerade 3 Beutel
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieAnwendungPCB/Kabel/PanelModularityWire SectionλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
CTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
PinsReihenH
(mm)
GenderTypIR
(A)
VerpackungFarbe Muster