| Topologie | FPGA |
| IC-Revision | A |
This reference design demonstrates key functions of next-generation zone control modules including power distribution, load actuation and in-vehicle networking. The design highlights functional safety-compliant PMIC and microcontroller (MCU) design, redundant power supply management with ideal diode controllers, and smart eFuses for safe power distribution. The design also features various options for load actuation expected in zone control modules, such as high-side drivers, motor drivers, configurable drivers, and a Class-D audio amplifier. The zone reference design showcases a variety of communication protocols, such as Ethernet, CAN and LIN and enables emerging trends in vehicle networking technology such as Ethernet AVB, 10BASE-T1S and CAN FD Light.
MCU with integrated Ethernet switch to optimize Ethernet ring topologies by implementing the following hardware protocols: 802.1Qav, 802.1Qbv, 802.1cb (partial), 1588 TE and 802.1Q ALEAVB Ethernet audio support with Ethernet PHY hardware time stamping and integrated media clock adjustmentASIL D-rated MCU and PMIC with system Limp Home Mode (LHM) capabilityLow-power mode with wake from Ethernet, CAN, LIN, smart eFuses, and MSDI off-board switch inputsOptimized microcontroller GPIO:SPI daisy chain of smart eFuses and motor driversSPI and I2C IO expanders
Artikel Nr. | Datenblatt | Simulation | Downloads | Status | Produktserie | λDom typ.(nm) | Emittierte Farbe | λPeak typ.(nm) | IV typ.(mcd) | VF typ.(V) | Chiptechnologie | 2θ50% typ.(°) | C | Tol. C | VR(V (DC)) | Bauform | Betriebstemperatur | DF(%) | RISO | Keramiktyp | B(mm) | Fl(mm) | Verpackung | Endurance(h) | IRIPPLE(mA) | ILeak(µA) | Raster(mm) | Ø D(mm) | Poles | L(mm) | Dampfphasenprozess | H(mm) | Betätigungskraft(g) | Elektrische Lebensdauer(Cycles) | Actuator-Farbe | Waschbar | MusterVerfügbarkeit & Muster | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | SPECWL-SMCW SMT Mono-color Chip LED Waterclear, 570 nm, Hellgrün | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWL-SMCW SMT Mono-color Chip LED Waterclear | dominante Wellenlänge [typ.]570 nm | Emittierte FarbeHellgrün | Spitzen-Wellenlänge [typ.]572 nm | Lichtstärke [typ.]40 mcd | Durchlassspannung [typ.]2 V | ChiptechnologieAlInGaP | Abstrahlwinkel Phi 0° [typ.]140 ° | – | – | – | Bauform0603 | Betriebstemperatur -40 °C up to +85 °C | – | – | – | Breite0.8 mm | – | VerpackungTape and Reel | – | – | – | – | – | – | Länge1.6 mm | – | Höhe0.7 mm | – | – | – | – | –Verfügbarkeit prüfen | |||
![]() | SPECWL-SMCW SMT Mono-color Chip LED Waterclear, 590 nm, Gelb | Verfügbarkeit – | Downloads27 Dateien Strahldaten
| Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWL-SMCW SMT Mono-color Chip LED Waterclear | dominante Wellenlänge [typ.]590 nm | Emittierte FarbeGelb | Spitzen-Wellenlänge [typ.]595 nm | Lichtstärke [typ.]120 mcd | Durchlassspannung [typ.]2 V | ChiptechnologieAlInGaP | Abstrahlwinkel Phi 0° [typ.]140 ° | – | – | – | Bauform0603 | Betriebstemperatur -40 °C up to +85 °C | – | – | – | Breite0.8 mm | – | VerpackungTape and Reel | – | – | – | – | – | – | Länge1.6 mm | – | Höhe0.7 mm | – | – | – | – | –Verfügbarkeit prüfen | ||
![]() | SPECWL-SMCC SMT Mono-color Chip LED Compact, 624 nm, Rot | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWL-SMCC SMT Mono-color Chip LED Compact | dominante Wellenlänge [typ.]624 nm | Emittierte FarbeRot | Spitzen-Wellenlänge [typ.]632 nm | Lichtstärke [typ.]110 mcd | Durchlassspannung [typ.]2 V | ChiptechnologieAlInGaP | Abstrahlwinkel Phi 0° [typ.]120 ° | – | – | – | Bauform0402 | Betriebstemperatur -40 °C up to +85 °C | – | – | – | Breite0.5 mm | – | – | – | – | – | – | – | – | Länge1 mm | – | Höhe0.25 mm | – | – | – | – | –Verfügbarkeit prüfen | |||
![]() | SPECWL-SMCW SMT Mono-color Chip LED Waterclear, 630 nm, Superrot | Verfügbarkeit – | Downloads27 Dateien Strahldaten
| Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWL-SMCW SMT Mono-color Chip LED Waterclear | dominante Wellenlänge [typ.]630 nm | Emittierte FarbeSuperrot | Spitzen-Wellenlänge [typ.]645 nm | Lichtstärke [typ.]60 mcd | Durchlassspannung [typ.]1.9 V | ChiptechnologieAlInGaP | Abstrahlwinkel Phi 0° [typ.]140 ° | – | – | – | Bauform0603 | Betriebstemperatur -40 °C up to +85 °C | – | – | – | Breite0.8 mm | – | VerpackungTape and Reel | – | – | – | – | – | – | Länge1.6 mm | – | Höhe0.7 mm | – | – | – | – | –Verfügbarkeit prüfen | ||
![]() | SPECWCAP-ATLI Aluminium-Elektrolytkondensatoren, –, – | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-ATLI Aluminium-Elektrolytkondensatoren | – | – | – | – | – | – | – | Kapazität470 µF | Kapazität±20% | Nennspannung50 V (DC) | – | – | Verlustfaktor8 % | – | – | – | – | VerpackungAmmopack | Endurance 5000 | Rippelstrom2000 mA | Leckstrom235 µA | Raster5 mm | Durchmesser13 mm | – | Länge20 mm | – | – | – | – | – | – | –Verfügbarkeit prüfen | |||
SPECWCAP-CSGP MLCCs 10 V(DC), –, – | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 10 V(DC) | – | – | – | – | – | – | – | Kapazität100 nF | Kapazität±10% | Nennspannung10 V (DC) | Bauform0402 | Betriebstemperatur -55 °C up to +125 °C | Verlustfaktor5 % | Isolationswiderstand5 GΩ | KeramiktypX7R Klasse II | Breite0.5 mm | Pad Dimension0.25 mm | Verpackung7" Tape & Reel | – | – | – | – | – | – | Länge1 mm | – | Höhe0.5 mm | – | – | – | – | –Verfügbarkeit prüfen | ||||
SPECWCAP-CSGP MLCCs 10 V(DC), –, – | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 10 V(DC) | – | – | – | – | – | – | – | Kapazität100 nF | Kapazität±10% | Nennspannung10 V (DC) | Bauform0603 | Betriebstemperatur -55 °C up to +125 °C | Verlustfaktor5 % | Isolationswiderstand5 GΩ | KeramiktypX7R Klasse II | Breite0.8 mm | Pad Dimension0.4 mm | Verpackung7" Tape & Reel | – | – | – | – | – | – | Länge1.6 mm | – | Höhe0.8 mm | – | – | – | – | –Verfügbarkeit prüfen | ||||
SPECWCAP-CSGP MLCCs 16 V(DC), –, – | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 16 V(DC) | – | – | – | – | – | – | – | Kapazität1 µF | Kapazität±10% | Nennspannung16 V (DC) | Bauform0603 | Betriebstemperatur -55 °C up to +125 °C | Verlustfaktor10 % | Isolationswiderstand0.1 GΩ | KeramiktypX7R Klasse II | Breite0.8 mm | Pad Dimension0.4 mm | Verpackung7" Tape & Reel | – | – | – | – | – | – | Länge1.6 mm | – | Höhe0.8 mm | – | – | – | – | –Verfügbarkeit prüfen | ||||
SPECWCAP-CSGP MLCCs 50 V(DC), –, – | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | – | – | Kapazität100 nF | Kapazität±10% | Nennspannung50 V (DC) | Bauform0603 | Betriebstemperatur -55 °C up to +125 °C | Verlustfaktor3 % | Isolationswiderstand5 GΩ | KeramiktypX7R Klasse II | Breite0.8 mm | Pad Dimension0.4 mm | Verpackung7" Tape & Reel | – | – | – | – | – | – | Länge1.6 mm | – | Höhe0.8 mm | – | – | – | – | –Verfügbarkeit prüfen | ||||
SPECWCAP-CSGP MLCCs 50 V(DC), –, – | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | – | – | Kapazität1 µF | Kapazität±10% | Nennspannung50 V (DC) | Bauform0805 | Betriebstemperatur -55 °C up to +125 °C | Verlustfaktor10 % | Isolationswiderstand0.1 GΩ | KeramiktypX7R Klasse II | Breite1.25 mm | Pad Dimension0.5 mm | Verpackung7" Tape & Reel | – | – | – | – | – | – | Länge2 mm | – | Höhe1.25 mm | – | – | – | – | –Verfügbarkeit prüfen | ||||
![]() | SPECWS-DISV Small Compact SMT Flat Actuator with Top Tape 1.27 mm, –, – | Simulation– | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | – | – | – | – | – | – | – | – | – | Nennspannung24 V (DC) | – | Betriebstemperatur -40 °C up to +85 °C | – | Isolationswiderstand100 MΩ | – | – | – | VerpackungTape and Reel | – | – | – | Raster1.27 mm | – | Poles4 | Länge6.25 mm | DampfphasenprozessJa | – | Betätigungskraft500 g | Elektrische Lebensdauer1000 Cycles | Actuator farbeWeiß | WaschbarJa | –Verfügbarkeit prüfen | |||
![]() | SPECWS-TASV SMT Tact Switch 6x6 mm, –, – | Simulation– | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWS-TASV SMT Tact Switch 6x6 mm | – | – | – | – | – | – | – | – | – | Nennspannung12 V (DC) | – | Betriebstemperatur -40 °C up to +85 °C | – | Isolationswiderstand100 MΩ | – | – | – | VerpackungTape and Reel | – | – | – | – | Durchmesser3.5 mm | – | – | Dampfphasenprozessnicht spezifiziert | Höhe5 mm | Betätigungskraft160 g | Elektrische Lebensdauer1000000 Cycles | Actuator farbeSchwarz | – | –Verfügbarkeit prüfen | ||
SPECWCAP-CSGP MLCCs 25 V(DC), –, – | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 25 V(DC) | – | – | – | – | – | – | – | Kapazität10 µF | Kapazität±20% | Nennspannung25 V (DC) | Bauform0603 | Betriebstemperatur -55 °C up to +85 °C | Verlustfaktor20 % | Isolationswiderstand0.01 GΩ | KeramiktypX5R Klasse II | Breite0.8 mm | Pad Dimension0.35 mm | Verpackung7" Tape & Reel | – | – | – | – | – | – | Länge1.6 mm | – | Höhe0.8 mm | – | – | – | – | –Verfügbarkeit prüfen |
| Erwartete Verfügbarkeit | Eingehender Bestand | Menge |
|---|---|---|
| Aktuelle Verfügbarkeit | – | – |