IC-Hersteller Texas Instruments

IC-Hersteller (108)

Texas Instruments ADC12D1620QML-SP | Demoboard TSW12D1620EVM-CVAL

ADC12D1620QML-SP evaluation module for 300-krad, 12-bit, dual 1.6-GSPS or single 3.2-GSPS ADC

Details

TopologieADC
IC-RevisionA

Beschreibung

The TSW12D1620EVM-CVAL is a 1.5-GHz wideband receiver evaluation module (EVM) that includes ceramic engineering models of the amplifier, analog-to-digital converter (ADC), clocking, temperature sensor, microcontroller, and power solution. The board is best suited for digitizing IF/RF frequencies from near DC to 1.5 GHz.The analog input path has the option of utilizing the 6.5-GHz LMH5401-SP as a single-ended-to-differential gain block, or bypassing the amplifier and driving the ADC with a differential signal. The amplifier is followed by the 12-bit, dual 1.6-GSPS or single 3.2-GSPS ADC12D1620QML-SP. These high-performance components are supported by the necessary power, microcontroller, and temperature-sensor devices.All primary devices included in the TSW12D1620EVM-CVAL are available in ceramic space grade. The EVM is directly supported by the TSW14DL3200EVM LVDS capture card (sold separately) and high-speed data converter pro software (DATACONVERTERPRO-SW) GUI.ADC-WB-BB or ADC-LD-BB balun boards can also be used an external method for converting single to differential to drive the differential ADC inputs. TSW12D1620EVM-CVAL and TSW14DL3200EVM, in combination with the TSW12D1620EVM-CVAL GUI and DATACONVERTERPRO-SW, provide a complete system for RF signal sampling and data analysis.

Eigenschaften

  • Total ionizing dose (TID) to 300 krad(Si)
  • Single event functional interrupt (SEFI) tested
  • Single event latch-up (SEL) > 120 MeV-cm2 /mg
  • Cold sparing capable
  • Wide temperature range –55°C to +125°C
  • Power consumption = 3.8 W or 2.7 W (1600- or 800-MHz clock)
  • 3-dB Input bandwidth = 3 GHz
  • Low-sampling power-saving mode (LSPSM) reduces power consumption and improves performance for fCLK ≤ 800 MHz
  • Auto-sync function for multi-chip systems
  • Time stamp feature to capture external trigger
  • Test patterns at output for system debug
  • 1:1 Non-demuxed or 1:2 or 1:4 parallel demuxed LVDS outputs
  • Single 1.9-V power supply

Typische Anwendungen

  • Synthetic aperture RADAR and LIDAR, Satellite wideband communications, Direct RF down conversion

Weiterführende Informationen

Von Texas Instruments freigegebene Bauteile

Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
Artikel Nr.
Daten­blatt
Downloads
Status
Produktserie
Anwendung
Interface typ
Typ
Ausführung
Gender
Pins
Montageart
Leiterplattendicke(mm)
IR(A)
Arbeitsspannung(V (AC))
Verpackung
MusterVerfügbarkeit & Muster
Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
SPECWR-USB Mini/Micro Steckverbinder, Mini USB 2.0, Type AB
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
AnwendungMini USB 2.0 
Interface typType AB 
TypHorizontal 
AusführungMit Pads 
GenderBuchse 
Pins
MontageartSMT 
Leiterplattendicke1.6 mm
Nennstrom1 A
Arbeitsspannung30 V (AC)
VerpackungTape and Reel 
Verfügbarkeit prüfen