STMicroelectronics VIPER012XSTR | Demoboard STEVAL-POE45W1

Beschreibung

The STEVAL–POEL45W1 Power over Ethernet (PoE) powered LED driver reference design delivers a power output of 45 W and dims LEDs down to 1% of the maximumbrightness without any flicker. The solution supports remote dimming control via Bluetooth with the PoE_Lighting Android application (available on Google Play).You can use this reference design to develop complete indoor network-powered lighting solutions with IP-based Powered Devices (PDs), without additional AC power infrastructure, and extend the functionality to include remote data management via existing LAN networks.The reference design features a highly integrated PM8805 IEEE802.3bt-compliant Powered Device (PD) PoE interface, a high efficiency LED6000 LED driver able to source up to 3 ADC current, and a certified SPBTLE-1S Bluetooth Low Energy module, compliant with BT specifications v4.2 and BQE qualified.The STSW-POEL45FW board firmware is programmed via the STSWBNRG1STLINK utility.

Eigenschaften

• PoE-PD IEEE 802.3af/at/bt compliant
• Constant current output, working in buck topology
• Output current – 1.4 A with < 0.05% current regulation
  • Number of LEDs connected at output: 6 – 11
  • white LEDs (3.3 V each)
• Wireless ON/OFF and dimming control with PoE_Lighting Android application
• Digital dimming with 1% resolution
• LED driver input voltage range 37 – 57 VDC
• Peak efficiency at maximum load > 95%
• Low standby power consumption < 100 mW
• Comprehensive set of protections:
  • open/no-load circuit protection
  • short/overload circuit protection
• RoHS compliant
• WEEE compliant

Typische Anwendungen

• Low power SMPS for home appliances, building and home control, small industrial, consumers, lighting, motion control
• Low power adapters

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers