STMicroelectronics STNRGPF01 | Demoboard STEVAL-IPFC01V1

Beschreibung

The STNRGPF01 is a digital controller designed specifically for interleaved PFC boost topologies and intended for use in high power applications.The controller is capable of driving up to 3 interleaved channels, generating the proper signals in each condition. Moreover, it implements a flexible phase shedding strategy that enables the correct number of PFC channels based on the actual load condition. With this function, the STNRGPF01 is always able to guarantee the highest power efficiency across a wide range of load current requirements.The device works in CCM at fixed frequency with average current mode control, and implements mixed signal (analog/digital) control. The inner current loop is performed by hardware, ensuring cycle-by-cycle regulation. The outer voltage loop is performed by a digital PI controller with fast dynamic response.The controller implements several functions: inrush current control, soft start-up, burst mode cooling management and status indicators.It also features a full set of embedded protections against overvoltage, overcurrent, and thermal faults.The STNRGPF01 is configured through a visual dedicated software tool (eDesignSuite) to match a wide range of specific applications. Using eDesignSuite, the user can customize the PFC conversion configuration and all the relevant electrical components. As a result, the tool will automatically generate a full schematic which includes a complete list of material and the final binary object code (FW) to be downloaded to the STNRGPF01.

Eigenschaften

• Input voltage range: 90 to 265 VAC
• Line frequency range: 47 to 63 Hz
• Maximum output power: 3 kW at 230 V
• Output voltage: 400 V
• Power factor: > 0.98 at 20% load
• Total Harmonic Distortion: <5% at 20% load
• Mixed-signal average current mode control, CCM fixed frequency operation
• Switching Frequency: 111 kHz
• Cycle-by-cycle regulation (analog current control loop)
• Input voltage and load feed-forwards
• Phase shedding
• Burst-mode operation
• Overvoltage protection
• Thermal protection
• Status indicator LEDs
• Inrush current limiter function
• Cooling function

Typische Anwendungen

• air conditioner
• 3 kW interleaved PFC refdesign based on a digital controller and includes a separate power board, control board and programming board
• battery chargers
• welding, industrial motors
• UPS / power supplies

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers