IC-Hersteller STMicroelectronics

IC-Hersteller (107)

STMicroelectronics STM32G474RET6 | Demoboard STEVAL-ISA172V3

Details

TopologieSonstige Topologie
IC-Revision1.0

Beschreibung

The STEVAL-ISA172V3 is a 2 kW fully digital switch mode AC-DC converter consisting of two power sections: a two-phase interleaved power factor corrector (PFC) and a DC-DC phase-shifted full-bridge converter, controlled by a STM32G474RE microcontroller for each section.The interleaved PFC comprises two boost converters operating with 180° out of phase, based on 600 V MDmesh M6 power MOSFETs.The downstream section comprises a DC-DC phase-shifted full-bridge converter based on MDmesh DM6 power MOSFETs and performing voltage step down using HF transformer, with a primary to secondary ratio chosen to maintain high enough efficiency and regulation over the entire operating range.On the primary side, the transformer is supplied by the full-bridge converter and switching losses are reduced thanks to zero voltage switching (ZVS) operation.On the secondary side synchronous rectification (SR) is used to ensure low conduction losses.The output voltage waveform is rectified by STripFET power MOSFETs and then smoothed by the output filter.

Eigenschaften

Input AC voltage: 90 to 264 VOutput DC voltage: 48 or 55 V, max output current: 42 AInput AC frequency: 47 to 63 HzNominal output power: 2 kWInterleaved boost PFC stagePFC switching frequency: 70 kHzPFC average in current mode controlCycle by cycle PFC current controlMaximum power factor: 0.99DC-DC stage: full-bridge phase-shifted ZVS with synchronous rectificationDC-DC switching frequency: 100 kHzOverall efficiency: 80 plus gold standardHF transformer isolation voltage: 4 kVForced cooling with air flow speed modulation according to the output powerOvertemperature protectionOutput short-circuit protectionPFC control and DC-DC control: managed by STM32G474REPFC power stage based on MDmesh M6 power MOSFETs and SiC diodesDC-DC power stage based on MDmesh DM6 power MOSFETsSynchronous rectification based on STripFET F7 power MOSFETsEMC filter for noise reductionRoHS compliant

Typische Anwendungen

  • Power supplies and converters - AC-DC converters, Digital Power

Weiterführende Informationen

Artikeldaten

Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
λDom typ.(nm)
Emittierte Farbe
λPeak typ.(nm)
IV typ.(mcd)
VF typ.(V)
Chiptechnologie
50% typ.(°)
Anwendung
f
Tol. f
Stabilität(ppm)
Cload(pF)
Betriebstemperatur
C
Tol. C
VR(V (DC))
Bauform
Q
DF(%)
RISO
Keramiktyp
L(mm)
B(mm)
H(mm)
Fl(mm)
Verpackung
Z @ 100 MHz(Ω)
Zmax(Ω)
Testbedingung Zmax
IR 2(mA)
RDC max.(Ω)
Typ
MusterVerfügbarkeit & Muster
Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
SPECWL-SMCW SMT Mono-color Chip LED Waterclear, 525 nm, Grün
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]525 nm
Emittierte FarbeGrün 
Spitzen-Wellenlänge [typ.]515 nm
Lichtstärke [typ.]430 mcd
Durchlassspannung [typ.]3.2 V
ChiptechnologieInGaN 
Abstrahlwinkel Phi 0° [typ.]140 °
Betriebstemperatur -40 °C up to +85 °C
Bauform0603 
Länge1.6 mm
Breite0.8 mm
Höhe0.7 mm
VerpackungTape and Reel 
Verfügbarkeit prüfen
SPECWL-SMCW SMT Mono-color Chip LED Waterclear, 590 nm, Gelb
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]590 nm
Emittierte FarbeGelb 
Spitzen-Wellenlänge [typ.]595 nm
Lichtstärke [typ.]120 mcd
Durchlassspannung [typ.]2 V
ChiptechnologieAlInGaP 
Abstrahlwinkel Phi 0° [typ.]140 °
Betriebstemperatur -40 °C up to +85 °C
Bauform0603 
Länge1.6 mm
Breite0.8 mm
Höhe0.7 mm
VerpackungTape and Reel 
Verfügbarkeit prüfen
SPECWL-SMCW SMT Mono-color Chip LED Waterclear, 625 nm, Rot
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]625 nm
Emittierte FarbeRot 
Spitzen-Wellenlänge [typ.]630 nm
Lichtstärke [typ.]250 mcd
Durchlassspannung [typ.]2 V
ChiptechnologieAlInGaP 
Abstrahlwinkel Phi 0° [typ.]140 °
Betriebstemperatur -40 °C up to +85 °C
Bauform0603 
Länge1.6 mm
Breite0.8 mm
Höhe0.7 mm
VerpackungTape and Reel 
Verfügbarkeit prüfen
SPECWE-CBF SMT-Ferrit, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
ProduktserieWE-CBF SMT-Ferrit
Betriebstemperatur -55 °C up to +125 °C
Bauform0402 
Länge1 mm
Breite0.5 mm
Höhe0.5 mm
Pad Dimension0.25 mm
Impedanz @ 100 MHz470 Ω
Maximale Impedanz1200 Ω
Maximale Impedanz300 MHz 
Nennstrom 2620 mA
Gleichstromwiderstand0.45 Ω
TypHochgeschwindigkeit 
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -55 °C up to +125 °C
Kapazität6.8 pF
Kapazität±0.5pF 
Nennspannung50 V (DC)
Bauform0603 
Güte536 
Isolationswiderstand10 GΩ
KeramiktypNP0 Klasse I 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -55 °C up to +125 °C
Kapazität10 pF
Kapazität±5% 
Nennspannung50 V (DC)
Bauform0603 
Güte600 
Isolationswiderstand10 GΩ
KeramiktypNP0 Klasse I 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -55 °C up to +125 °C
Kapazität15 pF
Kapazität±5% 
Nennspannung50 V (DC)
Bauform0603 
Güte700 
Isolationswiderstand10 GΩ
KeramiktypNP0 Klasse I 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 25 V(DC), –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -55 °C up to +125 °C
Kapazität470 nF
Kapazität±10% 
Nennspannung25 V (DC)
Bauform0603 
Verlustfaktor10 %
Isolationswiderstand1.1 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 25 V(DC), –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -55 °C up to +125 °C
Kapazität1 µF
Kapazität±10% 
Nennspannung25 V (DC)
Bauform0603 
Verlustfaktor10 %
Isolationswiderstand0.5 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -55 °C up to +125 °C
Kapazität10 nF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform0603 
Verlustfaktor2.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -55 °C up to +125 °C
Kapazität100 nF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform0603 
Verlustfaktor3 %
Isolationswiderstand5 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 16 V(DC), –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -55 °C up to +85 °C
Kapazität10 µF
Kapazität±20% 
Nennspannung16 V (DC)
Bauform0805 
Verlustfaktor10 %
Isolationswiderstand0.01 GΩ
KeramiktypX5R Klasse II 
Länge2 mm
Breite1.25 mm
Höhe1.25 mm
Pad Dimension0.5 mm
Verpackung7" Tape & Reel 
Verfügbarkeit prüfen
SPECWE-XTAL Schwingquarz, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
AnwendungProcessor, USB, Bluetooth 
Frequenz24 MHz
Frequenz±10ppm 
Stabilität15 ppm
Belastungskapazität9 pF
Betriebstemperatur -40 °C up to +85 °C
BauformCFPX-180 
Länge3.2 mm
Breite2.5 mm
Höhe0.8 mm
Verfügbarkeit prüfen